Motorola Astro Radio Software 68 81098e85 O Manual

209
Trunking One-Touch 
Button OptionsFrom the MAIN MENU, press F4 twice, F3, F9 and then F5 to access 
this screen.
This screen can be accessed from the TRUNKING SYSTEM OPTIONS screen 
(F4/F4/F3/F9) only when a radio ordered with the One-Touch feature (or a 
corresponding codeplug) has been read.
The One-Touch Feature is activated by pressing Side Button 1, 2, 3 or 
the Orange Button. These buttons can be programmed for One-Touch 
operation on the RADIO WIDE BUTTON CONFIGURATION screen 
(F4/F3/F3/F2)....

210
Field Definitions
Button (number)Use the UP/DOWN arrow keys to select the feature that corresponds to 
each one-touch button. One-touch buttons 1 through 4 may be 
programmed as Trunking buttons on the RADIO WIDE BUTTON 
CONFIGURATION screen (F4/F3/F3/F2).
Pressing a one-touch button while the radio is already in the feature 
corresponding to the one-touch button will cause the radio to abort the 
feature.
Note: The availability of Phone, Private Call, Call Alert,
Message, and Status on any one-touch...

211
Trunking Status 
AliasFrom the MAIN MENU, press F4 twice, F3, F9 and then F6 to access 
this screen.
Trunking System Type II
This screen can be accessed only if a radio containing the SMARTNET or 
SmartZone software option (or a corresponding codeplug) has been read and 
the Status Alias field on the TRUNKING SYSTEM OPTIONS screen (F4/F4/
F3/F9) is set to Enabled. This screen allows you to add and delete items 
in the Trunking Status Alias List.
Press Ta b to select the desired field, or press the...

212
Trunking Message 
AliasFrom the MAIN MENU, press F4 twice, F3, F9 and then F7 to access 
this screen.
Trunking System Type II
This screen can be accessed only if a radio containing the SMARTNET or 
SmartZone software option (or a corresponding codeplug) has been read and 
the Message Aliasing field on the TRUNKING SYSTEM OPTIONS screen 
(F4/F4/F3/F9) is set to Enabled. This screen allows you to add and delete 
items from the Trunking Message Alias List.
Press Ta b to select the desired field, or press...

213
Trunking Site AliasFrom the MAIN MENU, press F4 twice, F3, F9 and then F8 to access 
this screen.
Trunking System Type II
This screen can be accessed only if the Site Alias field on the TRUNKING 
SYSTEM OPTIONS screen (F4/F4/F3/F9) is set to Enabled. This screen 
allows you to add and delete items in the Trunking Site Alias List.
Press Ta b to select the desired field, or press the desired function key 
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to 
select the desired choice or...

214
Trunking 
PersonalityFrom the MAIN MENU, press F4 three times to access this screen.
Trunking System Type II
Trunking System Type IIi
These screens are used to view and edit the main information for a 
Trunking personality, such as the system number and time-out timer 
to be used and other options. It also provides access to the other 
Trunking screens such as those which relate to talkgroups, emergency, 
etc.
Press Ta b to select the desired field, or press the desired function key 
(F1 - F10). If a...

215
Function Key Descriptions
F2 - ADD PERSAdds a personality. This operation is NOT allowed without a system key or 
a hardware key present. You will automatically be moved to the new 
personality.
F3 - PREV PERSAccesses the previous personality.
F4 - NEXT PERSAccesses the next personality.
F5 - DELETE PERSDeletes the current personality. You will be prompted before the 
personality is actually deleted.
F6 - WAC AMSS FAILSOFTThis function will be visible only if the Coverage Type on the TRUNKING 
SYSTEM...

216 System/IDUse the UP/DOWN arrow keys to select the Trunking system the 
current personality is to use. (The system ID is shown according to 
system number). The Trunking system should be set up on the TRUNKING 
SYSTEM screen (F4/F4/F3) before personality information is entered since 
some of these fields depend on Trunking system information.
TypeUse the UP/DOWN arrows to make your selection. The selection in 
this field indicates the Trunked signalling protocol used on this 
system. If the Trunking...

217 Individual IDContains the Individual ID number that uniquely identifies your radio 
on a particular system. Valid IDs range between 1 and FFFE. The 
decimal equivalent of the Individual ID is used for your radio’s Private 
Conversation Call ID (7 + ID#), interconnect land-to-portable unit 
calls (7 + ID #) and interconnect land-to-portable talkgroup calls (7 + 
ID #).
For Type II Trunking, your radio will have a single Individual ID for each 
system independent of the number of talkgroups, user groups...

218 Time-Out TimerUse the UP/DOWN arrow keys to select the desired Time-Out Timer 
(TOT) value for this personality. The TOT determines the amount of 
time the radio can continuously transmit before it must be de-keyed. 
When the time is about up the radio beeps and then stops 
transmitting. Each personality may choose one of four different TOT 
values. The four values for the radio can be changed on the RADIO 
WIDE OPTIONS MENU (F4/F3/F2/F9).
Private Call TypeUse the UP/DOWN arrow keys to select the...