Motorola Astro Radio Software 68 81098e85 O Manual

219 Phone InterconnectUse the UP/DOWN arrow keys to select the type of Phone 
Interconnect for this personality. This option allows the radio to 
initiate and receive land-to-portable telephone calls and specifies the 
type of Interconnect. The choices are:
Note: Radio controls may require additional setup for your Phone
Interconnect configuration. Refer to the RADIO WIDE BUTTON/
SWITCH CONFIGURATION MENU (F4/F3/F3) help screen for
details.
Hot Keypad (DTMF)Use the UP/DOWN arrow keys to enable/disable Hot...

220 Call ID ListThis field will not be visible if the Operation field is set to Resp Only. Use 
the UP/DOWN arrow keys to select the Call List ID for the current 
personality. This is the number of the Call ID list that this personality 
will use for Private Call and Call Alert. The Private Call and Call Alert 
features must have a call list assigned for Unlimited and List operation. The 
Call ID List cannot be set to None when Call Operation is List or Unlimited.
Note: Radio controls may require...

221
WAC AMSS FailsoftFrom the MAIN MENU, press F4 thrice and then F6 to access this 
screen.
This screen can be accessed only if a System Key is present, the Coverage 
Type field on the TRUNKING PERSONALITY screen (F4/F4/F3) and the 
Failsoft Type field on the TRUNKING PERSONALITY screen (F4/F4/F4) are 
set to WAC AMSS. It is used to enter Failsoft frequencies used by Wide 
Area AMSS systems.
Press Ta b to select the desired field, or press the desired function key 
(F1 - F10). If a field is highlighted, use...

222
Trunking SubfleetsFrom the MAIN MENU, press F4 thrice and then F7 to access this 
screen.
Protocol Type IIi
This screen can be accessed from the TRUNKING PERSONALITY screen (F4/
F4/F4) only if the Protocol Type field on that screen is set to IIi.
This screen is used to create a list of subfleets that will use each 
personality. If the radio is a Secure-equipped radio, strapping fields will be 
visible and Secure strapping can be set up for each personality. The 
personality usually has 16 positions (the...

223
Field Definitions
PersonalityDisplays the number of the current personality.
SubfleetThis screen is used to enter subfleets that will use each personality. Use 
the F2/F5 keys to add/delete subfleets. Once the subfleets are entered, 
they are assigned to a Zone/System and a Channel/Subfleet selector 
position on the ZONE/CHANNEL ASSIGNMENT screen (F4/F8).
FailsoftUse the UP/DOWN arrow keys to enable/disable Failsoft for this 
subfleet. When the Central Site Controller fails in a Trunked system, 
the system...

224
Trunking 
TalkgroupsFrom the MAIN MENU, press F4 thrice and then F7 to access this 
screen.
Protocol Type IIi
This screen can be accessed from the TRUNKING PERSONALITY screen (F4/
F4/F4) only if the Protocol Type field on that screen is set to II.
This screen is used to create a list of talkgroups. A Talkgroup is a logical 
grouping of members of an organization. This is the Trunking 
equivalent to the conventional channel. If the radio is a Secure-equipped 
radio, strapping fields will be visible and...

225
Field Definitions
PersonalityDisplays the number of the current personality.
Tlk GrpThis screen is used to enter subfleets that will use each personality. Use 
the F2/F5 keys to add/delete talkgroups. Once the talkgroups are 
entered, they are assigned to a Zone/System and a Channel/Subfleet 
selector position on the ZONE/CHANNEL ASSIGNMENT screen (F4/
F8). The personality may have up to 16 talkgroups, including an 
Announcement Group and or a Dynamic Regrouping talkgroup.
FailsoftUse the UP/DOWN arrow...

226
Trunking 
Emergency Data 
ConfigurationFrom the MAIN MENU, press F4 thrice and then F8 to access this 
screen.
Protocol Type II
Protocol Type IIi
This screen is used to configure the Emergency feature for the current 
personality. Each Type II/IIi personality may have a unique 
configuration if necessary. The Emergency button must be enabled in the 
RADIO WIDE BUTTON/SWITCH MENU (F4/F3/F3). In addition, Silent 
Emergency must be configured on the RADIO WIDE CONFIGURATION 
screen (F4/F3/F2/F7).
Press Ta b...

227
Field Definitions
Protocol TypeUse the UP/DOWN arrow keys to select the Trunking Protocol Type for 
the current personality.
Access TypeThis field will be visible only if the Protocol Type field is set to IIi. Use the 
UP/DOWN arrow keys to select the Trunking Access Type. This 
determines how the radio will access a Type II/IIi system.
rSelect Tx Fast/Rx Fast for use with fast access systems and Tx Fast/
Rx Slow for slow access protocol emergency subfleets.
rNew Type I radios operating on fast access...

228If normal alarm operation is selected, the display will flash emergency 
and valid key chirp will be heard when the alarm condition is entered. 
Four full beeps will be heard when the alarm condition is 
acknowledged.
If silent alarm is selected, there will be no display or audible indication 
when the alarm condition is entered. Nor will there be any indication 
of alarm acknowledgment. In addition, the radio will mute the 
receiver audio so that no radio traffic is heard. This feature is one of the...