Motorola Astro Radio Software 68 81098e85 O Manual

229 Revert Fleet IDThe Fleet ID is a three-digit hexadecimal number where the first digit 
is the Prefix and second two digits represent the Fleet. For any size 
code, the subfleets for Fleetwide and Dynamic Regrouping are always 
available.
Revert SubfleetUse the UP/DOWN arrow keys to make your selection or enter a 
hexadecimal value directly. The possible Revert Subfleet IDs and the 
corresponding Revert Fleet IDs are listed in the table above. The Revert 
Subfleet ID is a one-character ID which corresponds...

230 ASTRO Strapping (for Revert 
Announcement Group)Use the UP/DOWN arrow keys to set the ASTRO strapping for the 
Revert Announcement Group. The settings are Analog or Digital.
ASTRO Strapping (for Revert 
Fleet ID)Use the UP/DOWN arrow keys to set the ASTRO strapping for the 
Revert Fleet ID. The settings are Analog or ASTRO.
Revert Talkgroup 
(for Revert Subfleet) StrappingUse the UP/DOWN arrow keys to make your selection. This field 
configures the transmit mode of Emergency Talkgroup or Emergency...

231
Trunking 
Personality OptionsFrom the MAIN MENU, press F4 thrice and then F9 to access this 
screen.
This screen is used to view and edit additional information for the 
current Trunking personality. Press Ta b to select the desired field, or 
press the desired function key (F1 - F10). If a field is highlighted, use 
the UP/DOWN arrow keys to select the desired choice or value.
Function Key Descriptions
F3 - PREV PERSAccesses the previous personality.
F4 - NEXT PERSAccesses the next personality.
F6 -...

232 Conversation TypeUse the UP/DOWN arrow keys to select the Trunking Conversation 
type. The available choices are:
Access TypeUse the UP/DOWN arrow keys to select the Trunking Access type:
Note: This information must be coordinated with your system
manager to ensure proper operation on the system.
Talk Permit ToneUse the UP/DOWN arrow keys to enable/disable Talk Permit Tones. 
When this feature is enabled, a Talk Permit Tone beep will be made 
every time a transmission is made. The tone indicates that...

233
SmartZone 
Preferred SitesFrom the MAIN MENU, press F4 thrice, F9 and then F6 to access this 
screen.
A system key or FTR key must be present and the Coverage Type field must 
be set to SmartZone on the TRUNKING SYSTEM screen (F4/F4/F3) if this 
screen is to be accessed. This screen is used to program the Preferred Site 
Status List. You may assign preferences for up to 8 sites for each per-
sonality associated with a SmartZone system.
Function Key Descriptions
F2 - ADD ITEMAdds a Preferred Site.
F5 -...

234 Prefer StatusUse the UP/DOWN arrow keys to make your selection. This field 
denotes the value of the preferred site status for the site.
None The site is given no preference. If the site is not listed 
here, the radio automatically assigns it no preference.
Least Preferred The site will be avoided unless it is the only usable site 
for operation.
Preferred The site will be used over all non-preferred sites with 
similar signal strength.
Always 
PreferredThe site will be used over all non-preferred...

235
Trunking Call List 
TableFrom the MAIN MENU, press F4 twice and then F5 to access this 
screen.
This screen is used to edit Trunking Call IDs and their associated 
names (or aliases). The number of characters for the name will be 
determined by the display capability of the radio. Each Trunking system 
may have a unique call list. Each list may have a maximum of 19 IDs.
Note: The call list defined on this screen are assigned to the
Trunking personalities on the TRUNKING PERSONALITY screen
(F4/F4/F4)....

236
Field Definitions
Call ListUse the UP/DOWN arrow keys or the F3/F4 keys to scroll through and 
select a specific call list. Alternatively, the F3/F4 function keys may 
also be used to scroll through the lists. Each Trunking personality may 
have a unique call list. Each list may have a maximum of 19 IDs.
Note: The call lists defined on this screen are assigned to a
Trunking personalities on the TRUNKING PERSONALITY screen
(F4/F4/F4). This assignment must be made or else the list will not be
accessible....

237
Conventional MenuFrom the MAIN MENU, press F4 and then F6 to access this screen.
This screen allows you to navigate to the Conventional edit screens. 
The options in these menus pertain only to Conventional radio features.
DFMOTOROLA Radio Service Software        Select Function F1 - F10.             
ASTRO PORTABLE Model:                                                        
                                                                             
MAIN:CHANGE/VIEW:CONV...

238
Function Key Descriptions
F2 - CONV WIDE OPT
(Conventional Radio Wide 
Options)Applicable to all Conventional channels and includes options such as 
monitor type.
F3 - CONV PERS
(Conventional Personality)This screen is used to define Conventional frequencies, coded squelch 
type (PL/DPL), and Conventional options (phone, scan, etc.) and 
signalling (MDC) permitted on each channel.
F4 - MDC CONFIG
(MDC Configuration)This function will be visible only when a radio with MDC capabilities has 
been read....