Motorola Astro Radio Software 68 81098e85 O Manual

259 Disabled, the Auto Sel Call Transmit field on this screen will NOT be
visible.
Selective Call EncodeUse the UP/DOWN arrow keys to enable/disable this option. When 
this field is set to Enabled, the user can send calls to an individual or a 
group of radios. This option is intended to eliminate the annoyance 
users experience when they receive traffic that does not pertain to 
them.
Note: If this feature is set to Enabled, and selection of target radio(s)
IDs via Call list is to be made available to the...

260 Rx Unmute RuleUse the UP/DOWN arrow keys to select Rx Unmute Rule. The choices 
are:
[1] For radios equipped with VSELP (Vector Sum Exited Linear 
Prediction) operation, the Talkgroup ID match is the Talkgroup 
ID associated with the selected ASTRO system. For the radio to 
unmute on a Selective Call, Selective Call Decode must be 
enabled. 
[2] For radios equipped with CAI (Common Air Interface) 
operation, for this option to be available, Talkgroup must be 
enabled or Selective Call Decode must be...

261 Note: Receive-only personalities must always revert.
Rx Network IDUse the UP/DOWN arrow keys to scroll through the available Rx 
Network ID values, or enter the value directly. It may take a few seconds 
for the screen to update to the new value. The Rx Network ID feature 
allows the separation of addressing modes among co-channel and 
adjacent channel users. This feature is similar to the Private-Line (PL) 
and Digital Private-Line (DPL) features which exist in analog radios. By 
choosing an Rx...

262in progress is allowed to unmute before establishing whether the call 
is a secure call. Enabling this field also allows calls to unmute 180 to 
360 ms earlier than without this field enabled. 
It is recommended that this feature only be used on non-secure 
channels because radios receiving secure calls will unmute to 
unintelligible audio until the call is recognized as secure. The factory 
default is Disabled.
TalkgroupThis field is displayed for radios equipped with CAI Digital Operation only. 
This...

263
ASTRO 
Conventional 
Talkgroup OptionsFrom the MAIN MENU, press F4, F6, F3, F9, F6 and then F6 to access 
this screen.
Note: This screen is available only if Talkgroup in the ASTRO
Conventional Personality Options screen (F4/F6/F3/F9/F6) is
Enabled.
This screen allows you to change/view Talkgroup options for the 
current personality.
The settings selected on this screen are personality specific and apply 
only to the ASTRO Personality identified on the screen. For radio 
models equipped to handle...

264 # (index)This field is used to select a Talkgroup from the Talkgroup List for the 
current personality. If the Talkgroup Selection Type field is set to 
Selectable, this Talkgroup will be used for the personality until another 
Talkgroup is selected by the user. If the Talkgroup Selection Type field 
is set to Strapped, this Talkgroup will be strapped to the personality. 
The range is from 1 to the number of Talkgroups in the Talkgroup List 
for the current personality.  the factory default is 1.
Note:...

265
OTACR/OTACS (For 
ASTRO Portables 
Only)From the MAIN MENU, press F4, F6, F3, F9, F6 and then F7 to access 
this screen.
This screen can be accessed only if the OTACR/OTACS software option has 
been purchased for the radio. This screen allows you to edit the Over-
The-Air-Channel-Reassignment (OTACR) and Over-The-Air-Channel-
Steering (OTACS) options available for the radio.
Press Ta b to select the desired field, or press the desired function key 
(F1 - F10). If a field is highlighted, use the UP/DOWN...

266 ChannelUse the UP/DOWN arrow keys to make your selection or enter the 
desired value directly. This determines the channel associated with 
this position of the Channel Selector Switch. If the Zone is set to 0 and 
the channel is set to 255 then the CSS position is considered to be 
unprogrammed. 

267
Conventional 
Personality RAC 
OptionsFrom the MAIN MENU, press F4, F6, F3, F9 and then F7 to access this 
screen.
This screen can be accessed from the CONVENTIONAL PERSONALITY 
OPTIONS screen (F4/F6/F3/F9) only if the current radio is RAC-capable 
and if either Rx Voice/Signal Type or Tx Voice/Signal Type is not set to 
ASTRO.
 This screen contains all the personality specific RAC-related 
information. The information contained in this screen will change 
depending on the current personality. Press...

268 Access TypeThis field will be visible only if the Repeater Access field is set to Enabled. 
Use the UP/DOWN arrow keys to select the Repeater Access Type. Valid 
choices are:
RAB 1 Code TypeThis field will be visible only if the Repeater Access field is set to Enabled and 
the Access Type field is set to Manual. Use the UP/DOWN arrow keys to 
select the type of Repeater Access Button operation. Depending on your 
radio capabilities, choices will be Singletone, DTMF or MDC.
RAB 1 Singletone (Hz)/RAB 1 
MDC...