Motorola Astro Radio Software 68 81098e85 O Manual

289 Emergency TypeThis field will be visible only if the Emergency field has been set to Enabled. 
Use the UP/DOWN arrow keys to choose one of the following settings:
Both types of emergency support reverting (transmitting emergency 
on a predetermined channel).
Acknowledge Alert ToneUse the UP/DOWN arrow keys to enable/disable this option. If this 
feature is enabled, an emergency acknowledge beep will sound when 
the radio receives acknowledgment of its emergency call.
Revert Channel TableThe Emergency...

290
Soft IDFrom the MAIN MENU, press F4, F6, F5, F3 and then F7 to access this 
screen.
This screen will be accessible only if the Soft ID option was purchased for the 
current radio. This screen allows you to enable or disable the Soft ID 
option. Press Ta b to select the desired field, or press the desired 
function key (F1 - F10). If a field is highlighted, use the UP/DOWN 
arrow keys to select the desired choice or value.
Field Definitions
Soft ID FeatureUse the UP/DOWN arrow keys to enable/disable this...

291
ASTRO System 
OptionsFrom the MAIN MENU, press F4, F6, F5, F3 and then F9 to access this 
screen.
                This screen is for radios equipped with VSELP
        This screen is for radios equipped with CAI Digital Operation
These screens allow you to view and edit ASTRO system options. Press 
Ta b to select the desired field, or press the desired function key (F1 - 
F10). If a field is highlighted, use the UP/DOWN arrow keys to select 
the desired choice or value.
Function Key Descriptions
F3 -...

292F9 - ASTRO SYS REMOTEBrings up a screen where you can view/edit options relating to  ASTRO 
System Remote Monitor/Radio Trace features.
Field Definitions
ASTRO SystemUse the UP/DOWN arrow keys or the F3/F4 keys to scroll through the 
available systems.
Talkgroup Hang TimeThis field is used to set the duration of the Talkgroup Hang Timer 
which is started at the end of a system wide Talkgroup call. While the 
Talkgroup Hang Timer is active, the Talkgroup ID 65535 will be used 
for all Conventional...

293 rAll LEDs turned off.
This command is useful in preventing unauthorized use when the 
radio is stolen or lost. The radio can be uninhibited by sending a Radio 
Enable command or by reading and writing the codeplug with the RSS.
Radio CheckUse the UP/DOWN arrow keys to enable/disable this feature. If this 
feature is enabled, the dispatcher can check the state of the radio 
(turned on or off) when it is within the range of the system (in Clear 
mode).
Priority Tx InhibitUse the UP/DOWN arrow keys to...

294button will override Silent Emergency and unmute the radio. If this 
field is set to Disabled, the Monitor button cannot be used to unmute 
the radio.
CAI Data RegistrationWhen this field is enabled, the subscriber radio will initiate a CAI data 
registration sequence to a host computer connected to the radio 
system infrastructure. The radio events that trigger this CAI data 
registration sequence include radio power up, mode change, exiting 
scan, radio enable, and exiting external keyloading. Failure...

295
ASTRO System 
Remote OptionsFrom the MAIN MENU, press F4, F6, F5, F3 and then F9 twice to access 
this screen.
This screen is available only if the Remote Monitor Option has been added. 
This screen allows you to view and edit features relating to the radio’s 
ASTRO system remote capabilities. Press Ta b to select the desired field, 
or press the desired function key (F1 - F10). If a field is highlighted, use 
the UP/DOWN arrow keys to select the desired choice or value.
Function Key Descriptions
F3 -...

296Remote Radio ModeThis field will be visible for view-only on Mobile radios. Use the UP/DOWN 
arrow keys to select the ASTRO Remote Radio Mode feature from 
among the following:
For each ASTRO Remote Monitor/Radio Trace command decoded by 
the radio, the radio will key up and stay keyed for the time indicated 
by the Tx Base Time and the dispatch console value. The dispatch 
console value cannot be controlled by the subscriber unit.
Tx Base Time (sec)Use the UP/DOWN arrow keys to select the desired...

297
ASTRO Call ListFrom the MAIN MENU, press F4, F6, F5 and then F4 to access this 
screen.
This screen allows you to view and edit Conventional ASTRO Call IDs 
and their associated names or aliases. Press Ta b to select the desired 
field, or press the desired function key (F1 - F10). If a field is 
highlighted, use the UP/DOWN arrow keys to select the desired choice 
or value.
Function Key Descriptions
F2 - ADD CALL IDAdds a Call ID entry to the Call List table.
F5 - DELETE CALL IDDeletes the highlighted...

298
Field Definitions
NumberThis is a view-only field that contains the automatically generated 
number of the Call ID. When you press F2 to add a Call ID, a number 
is automatically assigned to the Call ID.
TypeUse the UP/DOWN arrow keys to make your selection from among the 
following:
Call IDThis field contains the ASTRO Individual Call ID or the ASTRO Group 
Call ID for this member of the call list.
The Call ID is a unique number used to target a radio or group of radios 
when a call has to be sent to...