Motorola Astro Radio Software 68 81098e85 O Manual

159 Priority 1 Type & 
Priority 2 TypeThis field is visible only if the Scan Type field is set to Conventional or 
Priority Monitor. Use the UP/DOWN arrow keys to select the type of 
Priority Scan the radio will use from among the following:
Priority 1 MemberThis field is visible only when the Priority 1 Type field is set to Fixed or OP/
SEL. Use the UP/DOWN arrow keys to select the Scan member which 
has First Priority in scan selection. The channel number may also be 
entered directly. When assigned, the...

160 Designated Tx MemUse the UP/DOWN arrow keys to select the Designated Transmit 
Talkback channel for scan operation. For Conventional scan lists, this 
may be the number of the scan member which will serve as the 
designated transmit channel during scan operation. Enter the number 
of the scan member to have a fixed channel. This channel may NOT be 
a receive-only channel. The other options are:
Note: If the channel is a receive-only channel, the radio will issue a
warning to inform you that...

161
Radio Wide Scan 
OptionsFrom the MAIN MENU, press F4, F3, F5 and then F8 to access this 
screen.
This screen is used to customize the Channel Scan feature for specific 
applications. Options and parameters that affect Radio wide, 
Conventional and Trunking operations are available. Press Ta b to 
select the desired field, or press the desired function key (F1 - F10). If 
a field is highlighted, use the UP/DOWN arrow keys to select the 
desired choice or value.
Field Definitions
Nuisance Mode DeleteUse...

162 HUB Suspends ScanUse the UP/DOWN arrow keys to enable/disable HUB Suspends Scan 
which determines whether or not scan operation will be suspended 
while the microphone is removed from the hang-up box. This will 
allow the user to complete a conversation while scan is suspended. For 
Portables, this option is applicable only when a Vehicular Adapter is used.
Carrier Detect RequiredUse the UP/DOWN arrow keys to enable/disable this feature. When 
this option is enabled, the radio will stop scanning and...

163
Radio Wide Display 
OptionsFrom the MAIN MENU, press F4, F3 and then F6 to access this screen.
This screen can be accessed only for radios that have a display. This screen 
permits modifications to display options to customize the radio to 
specific user applications. The features and options shown here apply 
to all systems and personalities.
Press Ta b to select the desired field, or press the desired function key 
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to 
select the desired...

164 Slow Scroll Delay (ms)Use the UP/DOWN arrow keys to select the Slow Scroll Delay, the rate 
at which the display will slow scroll through a list before it begins to 
fast scroll. Valid entries range from 250 to 6250 ms in 250-ms 
increments.
Note: The Slow Scroll Rate should be greater than or equal to
Fast Scroll Rate but less than or equal to 6250 (that is, 250 

165 feature has been enabled on the ASTRO Conventional Talkgroups 
screen (F4/F6/F5/F6). then the Talkgroup Alias will be displayed. 
Otherwise, the Talkgroup ID will be displayed.
Note: This field is only visible for radios equipped with CAI
(Common Air Interface) Digital Operation.
Enabling this field will take precedence over the setting of the Display 
On Mode Change field on the More Multikey Parameters screen (F4/
F3/F2/F6/F6). The factory default is Disabled.
Alt Display Time (ms)Use the UP/DOWN...

166 Auto LightThis field will be visible for Portables only. If this feature is enabled, the 
display will light up each time a button or key is pressed (except for 
PTT). For ASTRO XTS 3000 models, the Auto Rotary Light (F4/F3/F2/
F9) will be automatically adjusted to match your selection for this 
Auto Light. This in effect results in synchronized behavior between the 
display light and the XTS 3000 Rotary knob lighting. The light will 
time out and again automatically shut off based on the setting of...

167
PTT-ID Display 
OptionsFrom the MAIN MENU, press F4, F3, F6 and then F7 to access this 
screen.
This screen permits modifications to display options to customize the 
radio to specific user applications. The features and options shown 
here apply to all systems and personalities. 
Field Definitions
ID DisplayUse the UP/DOWN arrows to enable/disable ID Display. If this feature 
is enabled, alphanumeric text (ID) uniquely identifying the 
transmitting radio will appear on the radio display.
Scan ID...

168
Alarm Options 
(Mobiles Only)From the MAIN MENU, press F4, F3, and then F7 to access this screen.
                                           Mobiles Only 
The ALARM OPTIONS screen is used to program and enable/disable 
Horn and Light features. Press Ta b to select the desired field, or press 
the desired function key (F1 - F10). If a field is highlighted, use the UP/
DOWN arrow keys to select the desired choice or value.
Field Definitions
Horn and LightsUse the UP/DOWN arrow keys to enable/disable the...