Motorola Astro Radio Software 68 81098e85 O Manual

109
Hardware 
Encryption Multikey  
OptionsFrom the MAIN MENU, press F4, F3, F2, F6 and F3 to access this 
screen.
This screen allows you to select the number of hardware keys used by 
the radio operator, enter hardware key names, and determine whether 
a key can be indexed or not. Press Ta b to select the desired field, or 
press the desired function key (F1 - F10). If a field is highlighted, use 
the UP/DOWN arrow keys to select the desired choice or value.
Field Definitions
Number of User Selectable...

110 IndexedUse the UP/DOWN arrow keys to make your selection, or enter Y(es) 
to enable indexing and N(o) to disable indexing. If indexing is 
enabled, you can map a specified encryption key to two different 
indexes. You can then switch indexes to change the channel to which 
the key is slaved. Any key slaved to a channel will now use the 
corresponding key from the new index. Keys may be indexed until the 
maximum number of available slots are used.
Hardware SlotThis is a view-only field. If the Indexed...

111
Software 
Encryption Multikey  
OptionsFrom the MAIN MENU, press F4, F3, F2, F6 and F4 to access this 
screen.
This feature allows you to specify the number of Software Keys that 
can be used by the radio user, enter software key names, and determine 
whether a software key can be indexed or not. Press Ta b to select the 
desired field, or press the desired function key (F1 - F10). If a field is 
highlighted, use the UP/DOWN arrow keys to select the desired choice 
or value.
Field Definitions
Number of...

112
Software Key Entry 
MenuFrom the MAIN MENU, press F4, F3, F2, F6 and F5 to access this 
screen.
This screen allows you to enter Software Key Logical IDs (LIDS) as well 
as software encryption keys. Press Ta b to select the desired field, or 
press the desired function key (F1 - F10). If a field is highlighted, use 
the UP/DOWN arrow keys to select the desired choice or value.
Field Definitions
User Selectable Software Key 
Erase AllowedEnter [Y]es to enable User Selectable Software Key Erase feature or...

113
More Multikey 
ParametersFrom the MAIN MENU, press F4, F3, F2 and F6 twice to access this 
screen.
This screen allows you to enter index names to determine what 
information is to be displayed on Transmit Secure Switch Select, PTT, 
or Mode Change. It also sets timers for Key ID Tx/Rx Hangtime, to 
enable/disable User Selectable Indexing and Erase Previous Index On 
User Change. Press Ta b to select the desired field, or press the desired 
function key (F1 - F10). If a field is highlighted, use the...

114 Key ID Transmit HangTime (ms)Use the UP/DOWN arrow keys to scroll through the Transmit Key ID 
Hangtime options or enter a value directly. This is the length of time 
that the radio will wait after a coded transmission before reloading the 
last user-selected or slaved encryption key. The hangtime can be set 
from 0 to 10000 ms (10 seconds) in 250-ms increments.
Index Name for Index 1Enter an index name directly of up to 14 characters. If no index name 
is entered, the default name “Index 1” will be...

115
OTAR OptionsFrom the MAIN MENU, press F4, F3, F2, F6 and F7 to access this 
screen.
Portables Only
Mobiles Only
This screen allows the user to set up all Over-The-Air Rekeying (OTAR) 
options that affect radio wide operation.  Some of the options selected 
may have to be set up at the Key Management Controller (KMC) site if they 
are to work properly.
Press Ta b to select the desired field, or press the desired function key 
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to 
select...

116
Field Definitions
Generate Key-Loss-KeyUse the UP/DOWN arrow keys to enable/disable this feature. When 
this feature is enabled, the radio will be able to generate a Key-Loss-Key 
signal from a Unique Shadow Key allowing the radio to be re-keyed via 
the Over-The-Air Rekeying (OTAR) feature. When this feature is 
disabled and the radio has lost all of its keys, the radio cannot be 
rekeyed via the OTAR feature.
OTAR AckUse the UP/DOWN arrow keys to enable/disable this feature. When 
this feature is...

117 Rekey Request Status Alert ToneUse the UP/DOWN arrow keys to enable/disable the Rekey Request 
Status Alert Tone feature. If this feature is enabled, the radio will 
generate a tone whenever it receives a Rekey Request status from the 
Key Management Controller (KMC) if the user exits the Rekey Request 
menu before the status message was received. The tone generated by 
the radio basically warns the user that the radio had not received a 
status message from the KMC until the time that the user...

118
Radio Wide 
Emergency OptionsFrom the MAIN MENU, press F4, F3, F2 and then F7 to access this 
screen.
Portables Only
Mobiles Only
This screen can be accessed only if the radio supports Emergency options. 
The Emergency parameters listed on this screen are radio wide in that 
they apply both to Conventional and Trunked signalling. Emergency 
operation must be enabled on the MDC SYSTEM screen (F4/F6/F4/F3) 
and/or the TRUNKING PERSONALITY EMERGENCY OPTIONS screen 
(F4/F4/F4/F8).  In addition, the...