Motorola Astro Radio Software 68 81098e85 O Manual

89
Saving Codeplug 
Data to an Archive 
FileFrom the MAIN MENU, press F3 and then F7 to access this screen.
The SAVE ARCHIVE function is used to create (or update) an archive 
copy of the codeplug information onto a diskette or hard disk.
Note: You are strongly encouraged to make an archive copy of
every radio installed or serviced in order to be able to quickly
restore customer information in case of a codeplug failure.
Function Key Descriptions
F2 - CHANGE ARCHIVEUsed to specify the directory path...

90
Field Definitions
Archive FilenameEnter the DOS name for the archive file to be saved. The standard DOS 
file naming convention must be used, i.e., the file name must be a one- 
to eight- character alphanumeric name appended with an optional 
one- to three-character alphanumeric extension (xxxxxxxx.yyy). The 
archive file name may be changed if an alternative radio tracking 
method is to be used.
Model NumberThis is the radio model number stored in the codeplug.
Serial NumberThis is the radio serial number...

91
Programming the 
Radio Codeplug 
(Requires RIB)From the MAIN MENU, press F3 and then F8 to bring up this screen.
This screen allows you to program the radio. A radio interface box 
(RIB) is required to perform this operation. To program this radio, you 
must first read the radio using the F2 READ RADIO function or read an 
archived codeplug using the F3 Get Archive function.
The serial number of the connected radio must be identical to the one in the 
serial number field on the RSS and the PROGRAMMING...

92
Programming HistoryFrom the MAIN MENU, press F3 and then F9 to access this screen.
All the fields on this screen are read-only fields. This screen shows the 
historical statistics of the radio, such as serial number, model number, 
last programmed date, programming source, etc. for reference 
purposes.
Note: The information on this screen is an example of what you
screen may look like. The actual numbers will vary according to
the current radio model.
CIMOTOROLA Radio Service Software        Information...

93
Field Definitions
Model NumberThis is the radio model number stored in the codeplug, which should 
correspond to the model number printed on the label on the back of 
the radio.
Software OptionThis field applies to Private System model numbers only. This field will 
detail any software options programmed. 
Serial NumberThis is the radio serial number stored in the codeplug, which should 
correspond to the serial number printed on the label on the back of the 
radio.
Radio Software VersionThis is the...

94
Notes 

 
95 
Change/View Menu
Functions
 
5
 
This section describes all the functions available from the 
CHANGE/VIEW MENU. To guide you through these functions, 
CHANGE/VIEW-related menus and screens are shown with their 
respective RSS locations from the MAIN MENU, function key 
descriptions and field definitions.  
Note:   
All functions (supported and unsupported) will be
displayed in the menu’s working area. The unsupported
functions (based on the radio’s model or options) will NOT be
displayed in the F-key...

 
96
CHANGE/ VIEW
Phone Lists and Options D 
DTMF Access/De-Access CodesH 
Dialing OptionsI 
Scan Lists and Options E 
Radio Wide Scan OptionsH 
Display Options F 
PTT-IDG 
Alarm Options (Mobiles only) G 
More Radio Wide Options (Mobiles only) I 
 D 
 
B  Trunking Radio Wide Options 
SmartZone EnvironmentB 
VOC OptionsC 
 C 
Control ChannelF 
Multi-key OptionsG 
ASTRO OptionsH 
Trunking System OptionsI 
One-Touch Button OptionsE 
Trunking Status AliasF 
Trunking Message AliasG 
Trunking Site AliasH 
 D...

97
Change/View MenuPress F4 at the MAIN MENU to access the CHANGE/VIEW MENU.
The CHANGE/VIEW MENU is a multi-level menu. Its sub-menus are 
used to change or view codeplug features and option configurations. 
All codeplug parameters are classified as Radio Wide, Conventional or 
Trunking. The CHANGE/VIEW MENU functions allow you to access 
each category.
A codeplug must be loaded into your computer’s memory (using GET/SAVE/
PROGRAM MENU functions) before you can access the CHANGE/VIEW 
screens. You may...

98
Function Key Descriptions
F3 - RADIO CONFIG
(Radio Configuration)Used to change or view radio parameters and options that affect 
overall radio operation (including Conventional and Trunking) such 
as button and volume settings. Some fields will not be visible if the radio 
does not support that option.
F4 - TRUNK DATA
(Trunking Data Configuration)This function key will NOT be visible for radio models that support 
Conventional operation only. A multi-level menu used to change or view 
options relating...