Motorola Astro Radio Software 68 81098e85 O Manual
Have a look at the manual Motorola Astro Radio Software 68 81098e85 O Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
209
Trunking One-Touch
Button OptionsFrom the MAIN MENU, press F4 twice, F3, F9 and then F5 to access
this screen.
This screen can be accessed from the TRUNKING SYSTEM OPTIONS screen
(F4/F4/F3/F9) only when a radio ordered with the One-Touch feature (or a
corresponding codeplug) has been read.
The One-Touch Feature is activated by pressing Side Button 1, 2, 3 or
the Orange Button. These buttons can be programmed for One-Touch
operation on the RADIO WIDE BUTTON CONFIGURATION screen
(F4/F3/F3/F2). When a button programmed for one-touch operation
is pressed, the Phone, Private Call, Call Alert, Status, or Message
corresponding to the One-Touch Index will be initiated. This
facilitates quick access to frequently used functions.
For example, assume that the One Touch Button 1 feature is selected
as Phone, the One Touch Index is set to 2, and the Orange Button is
programmed as One Touch 1. When the Orange button is pressed, the
second telephone number from the phone list will be transmitted.
Press Ta b to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
DDCIEMOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
ASTRO Model:
...TRUNKING:SYSTEM:OPTIONS:ONE TOUCH
ONE TOUCH BUTTON OPTIONS
------------------------
Button 1 Feature.......Disabled
Index..........1
Button 2 Feature.......Disabled
Index..........1
Button 3 Feature.......Disabled
Index..........1
Button 4 Feature.......Disabled
Index..........1
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT
210 Field Definitions Button (number)Use the UP/DOWN arrow keys to select the feature that corresponds to each one-touch button. One-touch buttons 1 through 4 may be programmed as Trunking buttons on the RADIO WIDE BUTTON CONFIGURATION screen (F4/F3/F3/F2). Pressing a one-touch button while the radio is already in the feature corresponding to the one-touch button will cause the radio to abort the feature. Note: The availability of Phone, Private Call, Call Alert, Message, and Status on any one-touch button is determined by the radio wide model options purchased for your radio. The default value for all one-touch buttons is Disabled. IndexEnter the value for the index into the list pertaining to the feature (Phone, Private Call, Call Alert, Status, or Message) assigned to the one-touch button. Note: The list size depends on both the radio model and the feature assigned to the one-touch button.
211
Trunking Status
AliasFrom the MAIN MENU, press F4 twice, F3, F9 and then F6 to access
this screen.
Trunking System Type II
This screen can be accessed only if a radio containing the SMARTNET or
SmartZone software option (or a corresponding codeplug) has been read and
the Status Alias field on the TRUNKING SYSTEM OPTIONS screen (F4/F4/
F3/F9) is set to Enabled. This screen allows you to add and delete items
in the Trunking Status Alias List.
Press Ta b to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
Function Key Descriptions
F2 - ADD ITEMAdds a Trunking Status Alias item.
F5 - DELETE ITEMDeletes the current Trunking Status Alias item. You will be prompted
before the item is actually deleted.
Field Definitions
NumberThis field is for viewing only. It cannot be changed.
Status Alias NumberUse the UP/DOWN arrows to make your selection. This field indicates
the position number for the Status Alias Text field. The valid range of
values is one to eight for Trunking and one to 16 for MDC and ASTRO.
Status Alias TextEnter the ASCII text that must be displayed on the radio when the
corresponding status number is selected.
DDCIFMOTOROLA Radio Service Software Enter or Scroll to Select Value.
ASTRO Model:
...SYSTEM:OPTIONS:STATUS ALIAS
TRUNKING STATUS ALIAS
---------------------
Num Status Alias Number Status Alias Text
--- ------------------- -----------------
1 1 STS 1
2 2 STS 2
3 3 STS 3
4 4 STS 4
5 5 STS 5
6 6 STS 6
7 7 STS 7
8 8 STS 8
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD DELETE EXIT
ITEM ITEM
212
Trunking Message
AliasFrom the MAIN MENU, press F4 twice, F3, F9 and then F7 to access
this screen.
Trunking System Type II
This screen can be accessed only if a radio containing the SMARTNET or
SmartZone software option (or a corresponding codeplug) has been read and
the Message Aliasing field on the TRUNKING SYSTEM OPTIONS screen
(F4/F4/F3/F9) is set to Enabled. This screen allows you to add and delete
items from the Trunking Message Alias List.
Press Ta b to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
Function Key Descriptions
F2 - ADD ITEMAdds a Trunking Message Alias item.
F5 - DELETE ITEMDeletes a Trunking Message Alias item. You will be prompted before
the item is actually deleted.
Field Definitions
NumberThis field is for viewing only. It cannot be changed.
Message Alias NumberUse the UP/DOWN arrows to make your selection. This field indicates
the position number for the Message Alias Text Field. The valid range
of values is one to 16.
Message Alias TextEnter the ASCII text that must be displayed when the corresponding
message number is selected.
DDCIGMOTOROLA Radio Service Software Enter or Scroll to Select Value.
ASTRO Model:
Page 1 of 2
...SYSTEM:OPTIONS:MESSAGE ALIAS
TRUNKING MESSAGE ALIAS
----------------------
Num Message Alias Number Message Alias Text
--- -------------------- --------------------
1 1 MSG 1
2 2 MSG 2
3 3 MSG 3
4 4 MSG 4
5 5 MSG 5
6 6 MSG 6
7 7 MSG 7
8 8 MSG 8
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD DELETE EXIT
ITEM ITEM
213
Trunking Site AliasFrom the MAIN MENU, press F4 twice, F3, F9 and then F8 to access
this screen.
Trunking System Type II
This screen can be accessed only if the Site Alias field on the TRUNKING
SYSTEM OPTIONS screen (F4/F4/F3/F9) is set to Enabled. This screen
allows you to add and delete items in the Trunking Site Alias List.
Press Ta b to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
Function Key Descriptions
F2 - ADD ITEMAdds a Trunking Site Alias item.
F5 - DELETE ITEMDeletes a Trunking Site Alias item. You will be prompted before the
item is actually deleted.
Field Definitions
NumberThis field is for viewing only. It cannot be changed.
Site Alias NumberThis field indicates the position number for the Site Alias Text Field.
The valid range of values is 1 to 64.
Site Alias TextEnter the ASCII text that must be displayed when the corresponding
site number is selected.
DDCIHMOTOROLA Radio Service Software Enter or Scroll to Select Value.
ASTRO Model:
...TRUNKING:SYSTEM:OPTIONS:SITE ALIAS
TRUNKING SITE ALIAS
-------------------
Num Site Alias Number Site Alias Text
--- ----------------- ---------------
1 1 SITE 1
2 2 SITE 2
3 3 SITE 3
4 4 SITE 4
5 5 SITE 5
6 6 SITE 6
7 7 SITE 7
8 8 SITE 8
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD DELETE EXIT
ITEM ITEM
214
Trunking
PersonalityFrom the MAIN MENU, press F4 three times to access this screen.
Trunking System Type II
Trunking System Type IIi
These screens are used to view and edit the main information for a
Trunking personality, such as the system number and time-out timer
to be used and other options. It also provides access to the other
Trunking screens such as those which relate to talkgroups, emergency,
etc.
Press Ta b to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
DDD
MOTOROLA Radio Service Software Enter or Scroll to Select Value.
ASTRO Model:
MAIN:CHANGE/VIEW:TRUNKING:PERS
Personality........1 TRUNKING PERSONALITY
--------------------
Protocol Type..................II Private Call Type.....Enhanced PC
System/ID..................1-0001 Operation..............List Only
Type......................II/IIi
Call Alert Operation....List Only
Announcement Group...........None Phone Interconnect......List Only
Hot Keypad (DTMF)........Disabled
Status....................Enabled
Individual ID..............1-0001 Message...................Enabled
Failsoft Type............Disabled Call ID List....................1
Scan List.................. 1
Time Out Timer.........3- 60
-
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD PREV NEXT DELETE WACAMSS TALK EMER MORE EXIT
PERS PERS PERS PERS FAILSOFT GROUPS OPTIONS OPTIONS
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Type.
ASTRO Model:
MAIN:CHANGE/VIEW:TRUNKING:PERS
Personality........1 TRUNKING PERSONALITY
--------------------
Protocol Type.................IIi Private Call Type............PCII
System/ID..................1-0001 Operation..............Unlimited
Type......................II/IIi
Size Code.......................A Call Alert Operation.....Disabled
Fleet ID......................001 Phone Interconnect.......Disabled
Hot Keypad (DTMF)........Disabled
Status...................Disabled
Individual ID..............1-0001 Message..................Disabled
Failsoft Type............Disabled Call ID List....................1
Scan List....................None
Time Out Timer.........3- 60
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD PREV NEXT DELETE WACAMSS SUB EMER MORE EXIT
PERS PERS PERS PERS FAILSOFT FLEETS OPTIONS OPTIONS
215 Function Key Descriptions F2 - ADD PERSAdds a personality. This operation is NOT allowed without a system key or a hardware key present. You will automatically be moved to the new personality. F3 - PREV PERSAccesses the previous personality. F4 - NEXT PERSAccesses the next personality. F5 - DELETE PERSDeletes the current personality. You will be prompted before the personality is actually deleted. F6 - WAC AMSS FAILSOFTThis function will be visible only if the Coverage Type on the TRUNKING SYSTEM screen (F4/F4/F3) and the Failsoft Type on the TRUNKING PERSONALITY screen (F4/F4/F4) fields are set to WAC AMSS. The Failsoft frequency used depends on which AMSS site the radio is using at the time. The frequencies are entered on the screen accessed by pressing this key. F7 -TALKGROUPS/SUBFLEETSIf the Protocol Type field on this screen is set to IIi, this function will read SUBFLEETS. If the Protocol Type field is set to II, this function will read TALKGROUPS. Brings up a screen where you can edit the position of the subfleets/talkgroups and associated data such as Secure strapping and scan type. F8 - EMER OPTIONS (Emergency Options)This function will be active only when a radio containing the SMARTNET or SmartZone software option has been read. Brings up a screen where you can edit and enable emergency information such as default talkgroup and edit emergency options such as Console Acknowledge Required. F9 - MORE OPTIONSBrings up a screen where you can change or view more Trunking personality parameters. Field Definitions PersonalityUse the UP/DOWN arrow keys or use the F3/F4 keys to scroll through the available personalities and make your selection. Personalities can be added by pressing F2 or deleted by pressing F5. You will be prompted before the personality is actually deleted. Protocol TypeUse the UP/DOWN arrows to select the Protocol Type. This refers to the type of Trunking system. The available options are: Type II An enhanced version of the original Motorola protocol that provides additional fleet management flexibility for a given system via an expanded signalling format. Type IIi A hybrid of Type I and II signalling systems. This Trunking protocol type allows Type I radios to communicate with Type II radios on the same voice channel.
216 System/IDUse the UP/DOWN arrow keys to select the Trunking system the current personality is to use. (The system ID is shown according to system number). The Trunking system should be set up on the TRUNKING SYSTEM screen (F4/F4/F3) before personality information is entered since some of these fields depend on Trunking system information. TypeUse the UP/DOWN arrows to make your selection. The selection in this field indicates the Trunked signalling protocol used on this system. If the Trunking System is Type II or IIi, the individual ID is a four- digit hexadecimal number. For Type II Trunking, your radio will have a single Individual ID for each system, independent of the number of talkgroups, user groups or personalities it is affiliated with on that system. Announcement GroupEnter a three-digit hexadecimal number for the Announcement Talkgroup directly. This field contains the user talkgroup for announcements for the current personality. ASTRO AG StrappingThis field will be visible only when the Announcement Group is not set to None. Use the UP/DOWN arrow keys to make your selection. You can select ASTRO Strapping for the Announcement Group (F4/F4/F4), and also select ASTRO Strapping for the Talkgroup on the TRUNKING TALKGROUPS screen (F4/F4/F4/F7). Valid choices are Analog and Digital. Fleet IDA system key or FTR key is required to access this field. The Fleet ID is a three-digit hexadecimal number where the first digit is the prefix and the second two digits refer to the fleet. For any size code, the subfleets for Fleetwide and Dynamic Regrouping are always available. The Announcement Group may or may not be included in the Talkgroup list entered by F7. Also, Failsoft for the announcement may be disabled on this screen. The valid range for the Fleet I depends on the size code chosen. Examples of Fleet IDs are 300, 402, 001, and 703. StrappingUse the UP/DOWN arrows to select the Transmit mode of the Announcement Group or Fleet ID for this personality from among the following: Size CodeA system key or FTR key is required to access this field. Use the UP/DOWN arrow keys to choose the Size Code for this fleet. The Size Code determines the maximum number of fleets, subfleets and individual IDs allowed. Valid size codes are: A, B, C, D, E, F, G, H, I, J, K, M, O and Q. For any size code, the subfleets for Fleetwide and Dynamic Regrouping are always available. Note: The size code and fleet ID chosen must match the programming of the Central Controller. Clear or Secure The Announcement Group or Fleet ID is forced to that particular transmit mode. Select The user is allowed to select the Secure transmit modes using the radios two-position concentric switch.
217 Individual IDContains the Individual ID number that uniquely identifies your radio on a particular system. Valid IDs range between 1 and FFFE. The decimal equivalent of the Individual ID is used for your radio’s Private Conversation Call ID (7 + ID#), interconnect land-to-portable unit calls (7 + ID #) and interconnect land-to-portable talkgroup calls (7 + ID #). For Type II Trunking, your radio will have a single Individual ID for each system independent of the number of talkgroups, user groups or personalities it is affiliated with on that system. Failsoft TypeWhen the Central Site Controller fails in a Trunked system, the system goes into Failsoft operation. Depending on the type of system, there will be different choices for Failsoft operation: Size Code Prefix Fleet SubfleetIndividual ID A 0 - 7 00 - 7F A - C 000 - 00F B 0 - 7 00 - 0F A - G 000 - 03F C 0 - 7 00 - 07 A - G 000 - 07F D 0 - 7 00 - 00 A - O 000 - 1FF E 0 - 7 00 - 3F A - C 000 - 01F F 0 - 7 00 - 1F A - G 000 - 01F G 0 - 7 00 - 1F A - C 000 - 03F H 0 - 7 00 - 0F A - C 000 - 07F I 0 - 7 00 - 07 A - C 000 - 0FF J 0 - 7 00 - 03 A - G 000 - 0FF K 0 - 7 00 - 01 A - O 000 - 0FF M 0 - 3 00 - 00 A - O 000 - 3FF O 0 - 1 00 - 00 A - O 000 - 7FF Q 0 - 0 00 - 00 A - O 000 - FFF Disabled No failsoft used. Personality Uses the Announcement Group Failsoft frequency for all talkgroups within the personality. Talkgroup The frequency is determined by the talkgroup selected and is entered in the TRUNKING TALKGROUP screen (F4/F4/ F4/F7). Failsoft by Talkgroup is NOT available with WAC AMSS type. WAC AMSS The Failsoft frequency depends on which AMSS site the radio is using at the time. The frequencies are entered using the F6 function key.
218 Time-Out TimerUse the UP/DOWN arrow keys to select the desired Time-Out Timer (TOT) value for this personality. The TOT determines the amount of time the radio can continuously transmit before it must be de-keyed. When the time is about up the radio beeps and then stops transmitting. Each personality may choose one of four different TOT values. The four values for the radio can be changed on the RADIO WIDE OPTIONS MENU (F4/F3/F2/F9). Private Call TypeUse the UP/DOWN arrow keys to select the desired Private Call type from among the following: Note: Radio controls may require additional setup for your Private Call configuration. Refer to the RADIO WIDE BUTTON/SWITCH CONFIGURATION MENU (F4/F3/F3) help screen for details. OperationThis field will be visible only if the Private Call Type field is set to a value other than Disabled. If this field is set to Resp Only, the Call ID LIst field on this screen will NOT be visible. Use the UP/DOWN arrow keys to select the operation of the Private Call feature for this personality from among the following: Call Alert OperationUse the UP/DOWN arrow keys to select Call Alert (Page) operation for the current personality. Call Alert allows the operator to receive and transmit pages either by typing in a six-digit decimal ID (Unlimited) or by selecting one of the IDs in the Trunking Call ID list (List Select). Note: Radio controls may require additional setup for your Call Alert configuration. Refer to the RADIO WIDE BUTTON/SWITCH CONFIGURATION MENU (F4/F3/F3) help screen for details. PC II Permits calls between fleets and sends an initiator ID so that the person receiving the call will know who sent it (Type II and IIi personalities). Enhanced PC Telephone-like operation. Disabled Deactivates the Private Call feature for this personality. Response Only Allows the radio to only accept calls. List Only Allows the user to make calls from the page list. UnlimitedRequires full keypad. Allows the user to make calls from the call list and from the keypad, and to modify the Call ID list. Response Only Allows the radio to accept pages only. List Only Allows the user to send pages from the page list. UnlimitedRequires full keypad. Allows the user to send pages from the page list and from the keypad. This also allows the radio user to modify the page ID list. Disabled No Call Alert operation is allowed. Disables paging facilities.