Home > Motorola > Portable Radio > Motorola Astro Radio Software 68 81098e85 O Manual

Motorola Astro Radio Software 68 81098e85 O Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Astro Radio Software 68 81098e85 O Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							309
    Conventional 
    Status Alias ListFrom the MAIN MENU, press F4, F6 and then F9 to access this screen.
    This screen contains the Conventional Status Alias List and is used to 
    assign a number and name alias to a particular Status message. Press 
    Ta b to select the desired field, or press the desired function key (F1 - 
    F10). If a field is highlighted, use the UP/DOWN arrow keys to select 
    the desired choice or value.
    Function Key Descriptions
    F2 - ADD STATUSAllows you to add a status alias to the list.
    F5 - DELETE STATUSAllows you to delete a status alias from the list. You will be prompted 
    for confirmation before the status alias is actually deleted.
    Field Definitions
    EntryThis is the system-assigned entry number. This is a view-only field.
    Status Alias NumberThe Status Alias Number is the number that is transmitted over the air. 
    It will match the status entry number in most cases. However, if the 
    first entry in the list should cause the fourth status to be sent, then four 
    should be assigned to the Status Alias Number of entry 1.
    Status Alias TextEnter the ASCII text for the message to be displayed when the 
    corresponding status number is selected. The size of the status will be 
    display-dependent.
    DFI
    MOTOROLA Radio Service Software        Enter or Scroll to Select Value.      
    ASTRO          Model:                                                        
    Page 1 of 2                                                                  
    ...CHANGE/VIEW:CONV:STATUS ALIAS LIST                                        
                                                                                 
                                CONV STATUS ALIAS LIST                           
                                ----------------------                           
                                                                                 
                   Entry  Status Alias Number     Status Alias Text              
                   -----  -------------------     -----------------              
                     1             1               STATUS  1                     
                     2             2               STATUS  2                     
                     3             3               STATUS  3                     
                     4             4               STATUS  4                     
                     5             5               STATUS  5                     
                     6             6               STATUS  6                     
                     7             7               STATUS  7                     
                     8             8               STATUS  8                     
                                                                                 
      F1      F2      F3      F4      F5      F6      F7      F8      F9     F10 
     HELP    ADD                    DELETE                                   EXIT
            STATUS                  STATUS                                        
    						
    							310
    Zone/Talkgroup 
    AssignmentAt the MAIN MENU, press F4 and then F8 to access this screen.
    A zone is an artificial grouping of channels (or talkgroups) to permit 
    ease of operation. Generally, all members of a zone will reflect some 
    common characteristic such as geographic location, job function, 
    signalling type, etc. 
    Each member of a zone is defined by selecting a Conventional 
    personality, or a Trunking personality and a talkgroup. On radios 
    equipped with a display, an optional name can also be assigned to each 
    member of the zone. Each zone can also be named. The number of 
    characters allotted for the zone name versus the channel name is 
    defined on the RADIO WIDE DISPLAY OPTIONS screen (F4/F3/F6). 
    Zones and channels can be added and deleted using the F2/F5 keys. 
    Zone selection may be made via the rotary switch, the toggle switch or 
    the keypad (if applicable).
    Press Ta b to select the desired field, or press the desired function key 
    (F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to 
    select the desired choice or value.
    Function Key Descriptions
    F2 - ADD ZONEAdds a zone.
    F3 - PREV ZONEAccesses the previous zone.
    F4 - NEXT ZONEAccesses the next zone.
    F5 - DELETE ZONEDeletes a zone. You will be prompted for confirmation before the zone 
    is actually deleted.
    F6 - ADD CHANAdds a channel.
    F7 - DELETE CHANDeletes a channel. You will be prompted for confirmation before the 
    channel is actually deleted.
    DH
    MOTOROLA Radio Service Software        Enter or Scroll to Select Value.      
    ASTRO          Model:                                                          
                                                                                 
    MAIN:CHANGE/VIEW:ZONE/CHAN                                                   
     Zone Number...  1    ZONE/TALKGROUP (CHANNEL) ASSIGNMENT                    
                          -----------------------------------                    
     Zone Name............Z1                                                     
                                         Personality      Talkgroup              
      Channel Number    Channel Name     Type    Number     Number   Strapping   
      --------------    ------------  --------   ------   ---------  ----------
              1           CENTRAL         Conv       1                            
              2           RAMPART         Conv       2                            
              3           SOUTHWEST       Conv       3                            
              4           HOLLENBECK      Conv       4                            
              5           HARBOR          Conv       5                            
              6           HOLLYWOOD       Conv       6                            
              7           WILSHIRE        Conv       7                            
              8           WESTLA          Conv       8        
                         
      F1      F2      F3      F4      F5      F6      F7      F8      F9     F10 
     HELP    ADD     PREV    NEXT   DELETE   ADD    DELETE                   EXIT
             ZONE    ZONE    ZONE    ZONE    CHAN    CHAN                         
    						
    							311
    Field Definitions
    Zone NumberUse the UP/DOWN arrow keys to select the desired zone. The number 
    may also be entered directly.
    Zone NameEach zone may be assigned an alphanumeric name. The number of 
    characters allotted for the zone name versus the channel name is 
    defined on the RADIO WIDE DISPLAY OPTIONS screen (F4/F3/F6). 
    The zone name will appear to the left of the channel name on the 
    radio display.
    Channel NumberThis is a read-only field. A channel number refers to the position in the 
    list which a particular member occupies. Depending on the radio 
    model and configuration, channel selection may be made via the 
    rotary switch, the toggle switch, or the keypad (if applicable).
    Channel NameEach channel may be assigned an alphanumeric name. The number of 
    characters allotted for the channel name versus the zone name is 
    defined on the RADIO WIDE DISPLAY OPTIONS screen (F4/F3/F6). 
    The channel name will appear to the right of the zone name on the 
    radio display.
    Personality TypeUse the UP/DOWN arrow keys to select either a Conventional or 
    Trunked personality for each zone member. Both types may be 
    assigned within a single zone.
    Note: Personalities must be defined before they can be assigned on
    this screen. Trunking personalities are entered on the TRUNKING
    PERSONALITY screen (F4/F4/F4), and Conventional
    personalities are entered on the CONVENTIONAL
    PERSONALITY screen (F4/F6/F3).
    Personality NumberUse the UP/DOWN arrow keys to select the personality number for 
    this channel. The number may also be entered directly.
    Talkgroup NumberUse the UP/DOWN arrow keys to select the Trunking Talkgroup (or 
    Subfleet) ID for the current channel in the list. The ID will be displayed 
    in hexadecimal. Select ATG for Announcement Group, FLT for 
    fleetwide., or DYN for a Dynamic Regrouping position.
    Note: Personalities must be defined before they can be assigned on
    this screen. Trunking personalities are entered on the TRUNKING
    PERSONALITY screen (F4/F4/F4), and Conventional
    personalities are entered on the CONVENTIONAL
    PERSONALITY screen (F4/F6/F3).
    Note: The Dynamic Regrouping must be enabled on the
    TRUNKING SYSTEM screen (F4/F4/F3); Announcement Group
    and Fleetwide features must be enabled on the TRUNKING
    PERSONALITY screen (F4/F4/F4) in order to be selected as a
    talkgroup. 
    						
    							 
    313 
    Print Menu Functions
     
    6
     
    The print function is used to produce permanent records of codeplug 
    configurations. A printer is required and should be connected to your 
    computer according to instructions in the user’s manual that came 
    with your computer. Graphics capability is NOT required.   
    In order to 
    print radio configuration data, you must first read or retrieve a codeplug file 
    using the GET/SAVE MENU and related screens.  
    Each print-out will contain the following data in addition to 
    configuration information: radio model and serial number 
    information, software version numbers, RSS version numbers, and the 
    date and time of the print-out. 
    Menu Map
    PRINT
    MENU
    DD
    Radio Wide Buttons, Switches, Display, Scan, Phone
    Radio Wide Options
    Buttons, Switches, Menu Items
    Phone Lists and Options
    Trunking Systems, Personalities, Call Lists, Options 
    Trunking Radio Wide Options C 
    B 
    C 
    B 
    C Trunking Systems: System ID, Control Channels, etc.
    Conventional Systems, Personalities, MDC, Options 
    Zone/Channel Assignment
    F
    H
    B 
    C 
    Conventional Radio Wide Configuration
    Conventional Personalities, Options
    Radio Codeplug Data SummaryIG
    Scan Lists and Options
    Display Options
    Alarm OptionsE 
    F 
    Trunking Personality: Talk Groups, Emergency options, etc.D 
    E Trunking Call List Data
    MDC Systems, Options, Call ListD 
    E ASTRO Systems, Options, Call List
    Auxiliary SystemsG 
    MODATF 
    Conventional Message Alias ListH 
    Conventional Status Alias ListI 
    Some of the menu items 
    shown here MAY NOT be 
    available if some features 
    were not purchased for the 
    radio.
    I More Radio Wide Options 
    						
    							 
    314 
    Print Menu
     
    At the MAIN MENU, press  
    F5  
     to access the PRINT MENU.  
    Make sure you have read a codeplug file using the GET/SAVE functions 
    before you attempt to print configuration information. 
     The PRINT function 
    is used to produce permanent records of codeplug configurations. A 
    printer is required and should be connected to your computer 
    according to instructions in the user’s manual that came with your 
    computer. Graphics capability is NOT required. 
    Note:  
    When printing, misalignment of page breaks may result if the
    printer is not set up properly. 
     For best results, configure the printer
    as an IBM ProPrinter or an Epson FX/MX having factory default
    settings. The default number of lines per page is 66. 
    Function Key Descriptions
     
    F3 
     - RADIO CONFIG
    (Radio Configuration) 
    Brings up a screen from which you can print a summary of Radio 
    Configuration information, including Button and Switch settings, 
    Phone Lists, Scan Lists, and Display information. 
    F4 
     - TRUNK DATA
    (Trunking Data) 
    Brings up a screen from which you can print a summary of Trunking 
    information including personalities, call lists, and options. 
    F6 
     - CONV DATA
    (Conventional Data) 
    Brings up a screen from which you can print out a summary of 
    Conventional Personality and MDC system information. 
    F8 
     -ZONE/CHANNEL ASSIGN
    (Zone/Channel Assignment) 
    Prints out a summary of current Zone/Channel Assignment 
    information for the radio. 
    F9 
     - DATA SUMMARY (Radio 
    Codeplug Data Summary) 
    Prints a summary of key radio programming parameters.
    EMOTOROLA Radio Service Software                                              
    ASTRO          Model:                                                        
                                                                                 
    MAIN:PRINT                                                                   
                                                                                 
                                      PRINT MENU                                 
                                      ----------                                 
                                                                                 
              F1  - HELP                                                         
              F2  -                                                              
              F3  - Radio Wide Buttons, Switches, Display, Scan, Phone           
              F4  - Trunking Systems, Personalities, Call Lists, Options         
              F5  -                                                              
              F6  - Conventional Systems, Personalities, MDC, Options            
              F7  -                                                              
              F8  - Zone/Channel Assignment                                      
              F9  - Radio Codeplug Data Summary                                  
              F10 - EXIT, Return to Main Menu                                    
                                                                                 
      F1      F2      F3      F4      F5      F6      F7      F8      F9     F10 
     HELP           RADIO   TRUNK            CONV          ZONE/CHN  DATA    EXIT
                    CONFIG   DATA            DATA           ASSIGN  SUMMARY       
    						
    							 
    315 
    Radio Wide 
    Configuration Print 
    Menu
     
    From the MAIN MENU, press  
    F5  
     and then   
    F3  
     to access the PRINT 
    RADIO WIDE CONFIGURATION MENU. 
    You must use the GET/SAVE functions to first read or get a codeplug for 
    printing radio configuration data.  
    The PRINT function is used to produce 
    permanent records of codeplug configurations. A printer is required 
    and should be connected to your computer according to instructions 
    in the user’s manual that came with your computer. Graphics 
    capability is NOT required. 
    Note:  
    When printing, misalignment of page breaks may result if the
    printer is not set up properly. 
     For best results, configure the printer
    as an IBM ProPrinter or an Epson FX/MX having factory default
    settings. The default number of lines per page is 66. 
    Function Key Descriptions
     
    F2 
     - RADIO OPTIONS 
    Prints a summary of Radio Wide options settings. 
    F3 
     - FEATURE OPTIONS 
    Brings up a menu from which you can print summaries of Button, 
    Switch and Menu Item configurations respectively. 
    F4 
     - PHONE OPTIONS 
    Prints a summary of Phone option settings. 
    F5 
     - SCAN OPTIONS 
    Prints a summary of the Scan List and associated Scan option settings. 
    F6 
     - DISPLAY OPTIONS 
    Prints a summary of Display option settings. 
    F7 
     - ALARM OPTIONS 
    This function is valid for Mobile radios only.  
    Prints a summary of Alarm 
    option settings. 
    F9 
     -MORE OPTIONS 
    Prints a summary of other Radio Wide option settings.
    EC
    MOTOROLA Radio Service Software        Select Function F1 - F10.             
    ASTRO          Model:                                                        
                                                                                 
    MAIN:PRINT:CONFIG                                                            
                                                                                 
                          RADIO WIDE CONFIGURATION PRINT MENU                       
                          -----------------------------------                  
                                                                                 
              F1  - HELP                                                         
              F2  - Radio Wide Options                                           
              F3  - Buttons, Switches, Menu Items                                
              F4  - Phone Lists and Options                                      
              F5  - Scan Lists and Options                                       
              F6  - Display Options                                              
              F7  - Alarm Options                                                
              F8  -                                                              
              F9  - More Options                                                 
              F10 - EXIT, Return to PRINT MENU                                   
                                                                                 
      F1      F2      F3      F4      F5      F6      F7      F8      F9     F10 
     HELP    RADIO  FEATURE  PHONE   SCAN   DISPLAY  ALARM           MORE    EXIT
            OPTIONS OPTIONS OPTIONS OPTIONS OPTIONS OPTIONS         OPTIONS       
    						
    							 
    316 
    Radio Wide Features 
    Configuration Print 
    Menu
     
    From the MAIN MENU, press  
    F5 
     and then  
    F3 
     twice to access this 
    screen. 
    You must use the GET/SAVE functions to first read or get a codeplug for 
    printing radio configuration data.  
    The PRINT function is used to produce 
    permanent records of codeplug configurations. A printer is required 
    and should be connected to your computer according to instructions 
    in the user’s manual that came with your computer. Graphics 
    capability is NOT required. 
    Note:  
    When printing, misalignment of page breaks may result if the
    printer is not set up properly. 
     For best results, configure the printer
    as an IBM ProPrinter or an Epson FX/MX having factory default
    settings. The default number of lines per page is 66. 
    Function Key Descriptions
     
    F2 
     - BUTTON CONFIG 
    Prints a summary of Button configuration settings. 
    F3 
     - SWITCH CONFIG 
    Prints a summary of Switch configuration settings. 
    F4 
     - MENU ITEM 
    Prints a summary of Menu Item configuration settings. 
    F5 
     -DEK  
    This function is valid for Mobile radios only 
    .The DEK function prints the 
    Direct Entry Keypad Programming information. 
    F6 
     -VIP IN 
    This function is valid for Mobile radios only 
    . The Vip In function prints 
    the Vehicle Interface Port Input programming information. 
    F7 
     -VIP OUT 
    This function is valid for Mobile radios only 
    . The Vip Out function prints 
    the Vehicle Interface Port Output programming information.
    ECC
    MOTOROLA Radio Service Software        Select Function F1 - F10.             
    ASTRO          Model:                                                        
                                                                                 
    MAIN:PRINT:CONFIG:FEATURES                                                   
                                                                                 
                       RADIO WIDE FEATURES CONFIGURATION PRINT MENU              
                       --------------------------------------------              
                                                                                 
              F1  - HELP                                                         
              F2  - Button Configuration                                          
              F3  - Switches Configuration                                       
              F4  - Menu Item List Configuration                                 
              F5  - DEK                                       
              F6  - Vip In                                              
              F7  - Vip Out                                                
              F8  -                                                              
              F9  -                                                  
              F10 - EXIT, Return to Radio Wide Configuration Menu                   
                                                                                 
      F1      F2      F3      F4      F5      F6      F7      F8      F9     F10 
     HELP   BUTTON  SWITCH   MENU     DEK     VIP     VIP                   EXIT
            CONFIG  CONFIG   ITEM             IN      OUT                            
    						
    							 
    317 
    Trunking Print Menu
     
    At the MAIN MENU, press  
    F5 
     and then  
    F4 
     to bring up the TRUNKING 
    PRINT MENU. 
    You must use the GET/SAVE functions to first read or get a codeplug for 
    printing radio configuration data. 
     The PRINT function is used to produce 
    permanent records of codeplug configurations. A printer is required 
    and should be connected to your computer according to the 
    instructions in the user’s manual that came with your computer. 
    Graphics capability is NOT required.
    Each print-out contains radio model and serial number information, 
    software version numbers, Radio Service Software version numbers, 
    and the date and time of the print-out. 
    Note:  
    When printing, misalignment of page breaks may result if the
    printer is not set up properly. 
     For best results, configure the printer
    as an IBM ProPrinter or an Epson FX/MX having factory default
    settings. The default number of lines per page is 66. 
    Function Key Descriptions
     
    F2 
     - TRUNK WIDE OPT 
    Prints information about options which are applicable to all Trunking 
    operations, regardless of system type. 
    F3 
     - TRUNK SYS 
    Prints Trunking system information. 
    F4 
     - TRUNKING PERS 
    Prints the Trunking personality and talkgroups. 
    F5  
    - TRUNK ID LIST 
    Prints the screen which documents the Trunking Call Lists.
    EDMOTOROLA Radio Service Software        Select Function F1 - F10.             
    ASTRO          Model:                                                        
                                                                                 
    MAIN:PRINT:TRUNKING                                                          
                                                                                 
                                    TRUNKING PRINT MENU                             
                                    -------------------                          
                                                                                 
              F1  - HELP                                                         
              F2  - Trunking Radio Wide Options                                  
              F3  - Trunking Systems: System ID, Control Channels, etc.          
              F4  - Trunking Personality:  Talk Groups, Emergency options, etc.  
              F5  - Trunking Call List Data                                      
              F6  -                                                              
              F7  -                                                              
              F8  -                                                              
              F9  -                                                              
              F10 - EXIT, Return to PRINT MENU                                   
                                                                                 
      F1      F2      F3      F4      F5      F6      F7      F8      F9     F10 
     HELP   TRUNK   TRUNK   TRUNK  TRUNK ID                                  EXIT
           WIDE OPT  SYS    PERS     LIST                                         
    						
    							318
    Conventional Print 
    MenuAt the MAIN MENU, press F5 and then F6 to access the 
    CONVENTIONAL PRINT MENU.
    You must first read or get a codeplug using the GET/SAVE functions in order 
    to print radio configuration data. The PRINT function is used to produce 
    permanent records of codeplug configurations. A printer is required 
    and should be connected to your computer according to instructions 
    in the user’s manual that came with your computer. Graphics 
    capability is NOT required.
    Each print-out contains radio model and serial number information, 
    software version numbers, Radio Service Software version numbers, 
    and the date and time of the print-out.
    Note: When printing, misalignment of page breaks may result if the
    printer is not set up properly. For best results, configure the printer
    as an IBM ProPrinter or an Epson FX/MX having factory default
    settings. The default number of lines per page is 66.
    Function Key Descriptions
    F2 - CONV WIDE OPT 
    (Conventional Radio Wide 
    Options)Prints a summary of the Conventional Personality information.
    F3 - CONV PERS
    (Conventional Personality)Prints the Conventional Personality information.
    F4 - MDC CONFIGBrings up a screen from which you can print MDC System 
    Configuration information.
    F5 - ASTRO SYSTEMSBrings up a screen from which you can print ASTRO system 
    configuration information.
    F6 - MODATPrints MODAT configuration information.
    EF
    MOTOROLA Radio Service Software        Select Function F1 - F10.             
    ASTRO          Model:                                                        
                                                                                 
    MAIN:PRINT:CONV                                                              
                                                                                 
                                  CONVENTIONAL PRINT MENU                           
                                  -----------------------                           
                                                                                 
              F1  - HELP                                                         
              F2  - Conventional Radio Wide Configuration                        
              F3  - Conventional Personalities, Options                          
              F4  - MDC Systems, Options                              
              F5  - ASTRO Systems, Options                                          
              F6  - Modat                                                           
              F7  - Auxiliary Systems                                            
              F8  - Conventional Message Alias List                              
              F9  - Conventional Status Alias List                               
              F10 - EXIT, Return to PRINT MENU                                   
                                                                                 
      F1      F2      F3      F4      F5      F6      F7      F8      F9     F10 
     HELP    CONV    CONV     MDC    ASTRO   MODAT    AUX     MSG    STATUS  EXIT
           WIDE OPT  PERS    CONFIG  CONFIG          SYSTEM  ALIAS   ALIAS        
    						
    All Motorola manuals Comments (0)

    Related Manuals for Motorola Astro Radio Software 68 81098e85 O Manual