Mitel Voice Processing Solutions Installation And Service Manual

Product Descriptionpasscodes every number of days.
Fifth, FPSA provides an audit trail (if the audit trail
is turned on) every time an administrator enters the server.
Automated or Video Dispatch
This feature enables you to establish mailboxes with specialized distribution lists for
dispatchers and field service representatives. Dispatched message activity can be
displayed on a terminal. This application is used by customers with dispatch
operations units to increase productivity and reduce dispatch...

Product Description
Feature Class of Service (FCOS)
An FCOS determines what voice mail capabilities a mailbox user has and how each
call is processed. Each feature is called a feature bit. Over 200 features bits are
available. The server allows a maximum of 640 
FCOSs, or combinations of features.
Each mailbox must be assigned an FCOS.
limits Class of Service (LCOS)The LCOS defines all of the time and storage parameters of a mailbox by restricting
message, greeting, and outdialing digit lengths. This...

Producr Description
Special Application MailboxesYou can configure special application mailboxes in the Model 70. Two special
application mailboxes are already preconfigured in the software, the administrator
and attendant mailboxes. You can create combinations of special application
mailboxes for special purposes. You can find more information about special
mailboxes in the 
VoiceMemo Reference and Confguration Manual.
AdministratorThe Administrator’s mailbox is included in the preconfigured 
so&are...

Product Description
RotationalRotational mailboxes allow constantly changing greetings, either by time and day
(period rotation) or with every call (index rotation).
TreeTree mailboxes route calls to preselected mailboxes when callers enter a single digit.
Callers hear a greeting which gives instructions on which single digit to enter to reach
the desired destination. Tree mailboxes can be configured to process callers with
rotary dialers.
Shared Extensions is a type of Tree mailbox which allows more...

2 Installing New SystemsHow To Use This ChapterThis chapter provides step-by-step procedures for installing a new Model 70.
Additional information is also located in the 
V&&Memo Reference and ConfgurationManual, Centigram Series 
G Technical Reference Manual, and the System
Implementation Guide.A task list and Centigram Procedures 
(CPs) describing new server installations are
located at the end of this chapter. The task list identifies two procedural levels of
CPs: a high-level CP and a low-level Cl?....

Installing New SystemsSite Selection and PreparationThe Model 
70 is designed to work in a typical commercial environment. Physical
space requirements are nominal. The following information describes general site
selection and preparation details. For detailed information, refer to the 
$j~ern
Implementation 
Guide.Choose a site that is:
Located near a grounded, three-pronged power outlet (for the United
States and Canada, this means a 
NEMA 5 - 1.5R outlet for 100 - 120 volt
AC or a NEMA 6 
- 15R outlet...

Installing New Systems
Before You Start
1.Set up an equipment log to record server model and serial numbers, the
server configuration and options found on the worksheets provided to you
by your system design engineer, and other information about the server
you might find helpful.
2.
Check the power supply setting. The 200-watt power supply is integrated
into the server to provide power for all resources, drives, cards, and
peripherals. A switch on the back panel is used to set the power supply to
operate...

Installing New SystemsThe cord must be rated for use at the AC voltage available, with a
current rating that is at least 125 percent of the current product
rating.The connector at the end of the cord that plugs into the AC 
walloutlet must be a grounding-type male plug and must show
certification by an agency acceptable in your region.
The connector at the product end must be an IEC type CEE-22
female connector.
The cord must be less than 14.8 feet (4.5 meters) long.
nI0
WARNING!zDo not attempt to modify...

Installing New Systems
Installing the Model 70Each Model 
70 is shipped preconfigured per specific customer order (all hardware
and software loaded). Regardless of configuration, the base server is shipped with the
components listed below. (Additional components might be needed, depending on
specific country requirements.)
l Model 70
l Modem
l Modem Cable
l Power Cable
Figure 2-2 illustrates the server components and basic installation procedure. To
install the Model 70, follow the steps shown in the...