Mitel Voice Processing Solutions Installation And Service Manual

About This ManualReader Advisoriesxii
Reader advisories used in this manual are shown below.
Note:Information especially useful in relation to this procedure.
n
CAUTION!
QInformation that helps you prevent equipment or softwaredamage.
ACAUTION!IInformation that helps 
you avoid electrostatic discharge
(ESD) damage to the equipment.
WARNING!Information that helps you prevent an interruption to
telecommunications traffic.
0
I
WARNING!
0A hazard that can cause you personal injury.
ADANGER!
AWarns of a...

About This ManualBefore You StartThis manual assumes that you are familiar with using a console and keyboard. This
section describes how to use the Centigram Series 6 server effectively.
Console lips and TechniquesThe tips and techniques offered in the following paragraphs can make configuration
entry sessions at the Centigram Series 6 server maintenance console more productive.
Viewing Menus
lWhen you finish entering a value for a parameter, the server displays an
abbreviated form of the current menu,...

About This ManualIf you find that the Centigram Series 6 
senrer has timed out, follow the steps below.
If your screen is blank, press any key to reactivate the screen and then continue with
these steps.
1.Press any key to start the login sequence.
2.Enter your user ID and password (if requested).
3.Starting from the Main Menu, enter menu options to proceed to the menu
from which the server timed out.
4.Reenter data as needed to regain lost work.
Quitting an Entry Session
At any point during entry of...

About This Manual
Preparing for Hardware InstallationBefore you begin to install any Model 
70 hardware, read the following warnings.
0
00
I0
AA5
WARNING!An equipment grounding conductor that is not smaller in size
than the ungrounded branch-circuit supply conductors must
be installed as part of the circuit that supplies the product or
system.Bare, covered or insulated grounding conductors are
acceptable.Individually covered or insulated equipment
grounding conductors must have a continuous outer finish...

About This Manual
Protecting Your Equipment From Damagea
u
CAUTION!Many of the Model 
70 components are easily damaged by
electrostatic discharge (ESD) or rough handling: line cards,
CPU cards, and hard disks are particularly susceptible to
damage. Unless instructed otherwise, observe the precautions
listed below and in individual sections during the handling of all
components.
If you follow these simple instructions, you 
will reduce the risk of equipment
trouble, down-time, and customer...

1 Product DescriptionIntroductionThis chapter provides a high level description of the Centigram Series 6
Communications Server Model 
70 hardware and software functions, features, and
components.
It also provides general server specifications.Expanded discussions of some of the topics in this chapter are found in other
chapters of this manual. Additional information is also located in the 
VoiceMemoReference and 
Conjguration Manual and the Centigram Series G Technical Reference
Manual.
Model 70...

Product DescriptionAs the block diagram shows, the Model 
70 is a PC-like server containing a CPU,
serial port, floppy disk, mass storage, and ISA expansion slots. Three types of ISA
adapter cards can be inserted into the expansion slots: telephony interface cards
(analog and digital interface cards), telephony service cards (Fax), and computer
interface cards (Serial, Ethernet). The telephony interface cards and the telephony
service cards can also be linked to the 
h4VIP bus, which is a special ribbon...

Product DescriptionCapacities and Expansions
Model 70Maximum configuration for the Model 70 includes:
l7 available line/specialty card slots
lVoiceMemo ports (24 analog/30 digital)
lMI55 IDE hard disk 
- 2,730 mailboxes; 55 hours of message storage @
18.5Kbps, or 40 hours @ 24 Kbps
lMultiple, redundant hard disks (2 IDE disks maximur$
lUser/system prompts in four languages
lSpecialty cards: Fax card, Smartcard, Serial 16/32 card, and Ethernet card
1-3 

Product Description
Model 70 General Server Specifications
Safety ComplianceThis equipment meets or exceeds requirements for safety in the US (UL 1950 1st
Edition), Canada (CSA 
950),and Europe (TW to EN60950, IEC 950).
FCC Regulatory ComplianceThis equipment meets or exceeds requirements for EM1 and telephone
interconnectability standards in the US.
Physical SpecificationsHeight (with feet installed)
Width
Depth
Weight
Server EnvironmentTemperature
Humidity
Altitude
BTUsNoise at operator position
ESD
AC...

Product Description
Major Hardware ComponentsThe Model 70 consists of a standard desktop PC cabinet featuring seven available
ISA slots, two peripheral bays, a 200-watt power supply, a 486-66 MHz CPU, an
IDE hard disk, a 
3.5-inch floppy disk drive, and a modular design for quick and easy
component maintenance. It also features a special Multi-Vendor Integration
Protocol (MVIP)ribb
on cable bus that connects all line cards, allowing them to
switch to any shared resource within the module level. The...