Mitel Sx 50 Dpabx Instructions Guide

Customer Data Entry (CDE) 
Table 3-l Feature Index 
(continued) 
Feature Name Command Register Field 
Trunk intercepts 501 - 580 4 d-k 
5 
b-f 
6 
c 
Trunk Signaling - DTMF/Rotary Outpulsing 100 2 f 
151 - 156 2 !J 
- 
Trunk-to-Trunk Plus Station Conferencing 100 05 c-+-i 
121 - 129 1 
501 - 580 1 A 
2 c 
Unlimited Wait For Dial Tone 151 + 156 2 b 
. 
User Security Code Programming 180 123 b-h 
191 01 
b-e 
Voice Mail Port 100 8 
g+i 
12 c 
110 19-24 
c-f 
38,39 c-f 
121 - 129 2 
3 :t 
4 
5 g:h 
k 
7...

-. 4 
’ CUST6MER DATA ENTRY 
REGISTERS 
General 
4.1 This Part details the options each CDE field controls and shows the default values. It 
serves as a guide for initial programming or modification to t-he existing database. 
Those Commands which cannot be edited are omitted from this Section. Refer to 
Section 9104-091-350-NA, Troubleshooting Procedures and General Maintenance 
Information for details. These Commands include: 
l Command 980, System Status Display 
l Command 981, Inter-DX Link Status...

Customer Data Entry (CDE) 
Table 4-l Card and Module Types 
(continued) 
Card/Module Type 
DID Trunk Card (4 Trunks) 
Universal Card 
l Music on Hold/Pager Module 
l E&M Trunk Module 
l RMATS Module 
Control Card 
Control Card 2 * .Abbreviation 
DID4 - 
UNIVERSAL 
MOH/PAGER 
E&M MOD 
RMATS 
MCCl 
MCC2 
Page 2 of 2 
* Music on Hold/Paging capability requires MS53 software 
Table 4-2 Station Equipment Numbers 
Circuit 
Number Slot Number 
I I 
I I I I I I 1 
I I 
( 
I 
16 016 032 048 064 1 080 1 096 1 112...

- 
Customer Data Entry Registers 
Table 4-3 SUPERSETITrunk Equipment Numbers 
Circuit Slot Number 
Number 
1 2 3 4 5- 6 7 .8 9 10 
01 01 09 17 25 33 41 49 57 65 73 
Note: E&M Trunks use ODD Equipment Numbers only. 
System Options Programming 
4.3 The System Options commands set parameters and feature options that apply 
throughout the system. Likewise, the Feature Access Codes table assigns access 
codes available throughout the system. In both cases there are default values; the 
installer need only...

Customer Data Entry (CDE) 
COMMAND 100 System Options Programming (Cont’d) 
h: RESERVED 
Attendant Functions 
a,b: 
Register Number 
c: Executive Busy Override (Console) 
0 = Disable 
1 = Enable except on I/C Trunks 
2 = Enable on all Calls 
d: Console Inhibit 
0 = Disable 
1 = Enable 
e,f: 
RESERVED 
Tone and Ringing Control 
a bcdefghij 
0 3 0 1 4 1 1 2 0 0 
a,b: Register Number 
c: 
Tone Plan Variants 
0 = North American 
1 = Hong Kong 
2 = Taiwan 
d: Transfer Dial Tone 
0 = Disable 
1 = Enable 
e:...

Customer Data Entry Registers 
COMMAND 100 System Options Programming (Cont’d) 
g: Distinctive Callback Ringing 
0 = Disable 
1 = Enable 
h: 
Disconnect Tone 
0 = Disable 
1 = Send selected DTMF tone to Dictation Port 
2 = Connect selected Call Progress Tone to Dictation Port 
i,j: DTMF / Call Progress Tone Selection 
If field H = 1 . 
00 - 09 = DTMF digits 0 - 9 
10 = DTMF * sign 
11 = DTMF # sign 
If field H = 2 
00 = Dial Tone 
01 = Busy Tone 
02 = Reorder Tone 
Register 04 
These field values should...

Customer Data Entry (CDE) 
f: Conference Warning Tone 
0 = Disable 
1 = Enable if a CO is a conferee 
2 = Enable on all conferences 
DID To CO Connection 
0 = Disable 
1 = Enable 
h: DID To E&M Connection 
0 = Disable 
1 = Enable 
. . 
I. DID To DID Connection 
0 = Disable 
1 = Enable 
Station Attributes 
a b c d e f g 
0 6 0 1 0 0 0 
a,b: Register Number 
c: Station Switchhook Flash Timing ’ 
0 = 150-750 ms 
1 = 150-1500 ms 
2 = Flash is Release 
3 = 90 ms Calibrated Flash 
d: Station Digit Collection...

Customer Data Entry Registers 
COMMAND 100 System Options Programming (Cont’d) 
SUPERSET Attributes 
a,b: Register Number 
c: Auto-Answer System Enable 
0 = Disable 
1 = Enable 
d: SUPERSET Auto-hold 
0 = Disable 
1 = Enable 
e: Delayed Ringing Key Timeout 
1 = 10 seconds 
2 = 20 seconds 
3 = 30 seconds 
Overflow Control 
I- 
a b c d e f g h i 
0 
8 2 0 3 2 0 0 0 
a,b: Register Number 
c: Overflow Mode In Day Service 
0 = Disable 
1 = Immediate Switching to Overflow 
2 = Automatic Switching to Overflow...

Customer Data Entry (CDE) 
g,h,i: Overflow Point 
000 = Night Bell 
001 --, 160 = Station Equipment Number 
161 + 166 = Hunt Group 
167 = Ring Group 
Features Selection 1 
a b c d e f g h i 
091000000 
a,b: Register Number 
c: Abbreviated Dial Enable 
0 = Disable 
1 = Enable 
d: Last Number Redial ^O Key Access 
0 = Disable 
1 = Enable 
e: Conflict Dialing Timer 
0 = Disabled 
1 = 3 seconds 
2’ = 5 seconds 
3 = 7 seconds 
f: Music On Hold 
0 = Disable 
1 = Enable 
9: Background Music 
0 = Disable 
1 =...

w 
Customer Data Entry Registers 
COMMAND 100 System Options Programming (Cont’d) 
Features Selection 2 
~1. 
a,b: Register Number 
c: Automatic Wake-Up 
0 = Disable 
1 = Enable with Wake-Up tone 
2 = Enable with Music 
3 = Enable with Intercept to RAD 
d: Automatic Wake-Up Printout 
0 = Disable 
1 = Enable 
e: Message Register Audit 
0 = Disable 
1 = Enable 
2 = Enable with clearing of Message Registers 
f: Use Of Hash (#) For Trunks 
0 = Enable Tone-to-Pulse Override on Trunks 
1 = Enable End-of-Dial...