Mitel Sx-50 ATTENDANT CONSOLE USER GUIDE

WAKE-UP 
To Set Up 
0 
l 
When a Wake-up call is set, the extension automatically rings at the 
selected time. Either tones or recorded music greet the extension 
users/guests when they answer. 
If the call is not answered, the system tries again twice, at five minute 
intervals. If a wake-up call remains unanswered after three tries, the 
system cancels it, and an alarm is printed. 
Your system may be equipped with “message notification lamps” on 
telephones. These will flash after an unanswered Wake-up...

WAKE-UP 
l Dial the new Wake-up time (24-hour format) 
EXT-NUMBER 252-l 315 
l Release WAKE-UP 
to resume normal operation, with the new Wake-up time set. 
To Cancel a Wake-Up Call 
l Press and hold down WAKE-UP 
l Dial the extension number 
l Dial 9999 
to erase the Wake-up time. 
l Release WAKE-UP 
to resume normal operation, with no Wake-up now programmed for 
that extension. 
Attendant Functions 4-29  

CHAPTER 5 
REFERENCE  

INTRODUCTION 
Once you are familiar . . , 
with basic console operation, you should only need this section for 
occasional reference to the tables and reference lists provided. Fill in 
these lists so that you will have the information when you need it. 
In Handy Hints you can record your own tips on operating the console 
to assist yourself and others in the future. 
Let the Index help you find the information you need as rapidly as 
possible. 
Reference 5- 1  

TELEPHONE DIRECTORY 
. : 
i : 
, 
5-2 Reference 
-  

ABBREVIATED DIALING LIST 
Reference 5-3  

TRUNK GROUP ACCESS CODES 
; : 
5-4 Reference  

HUNT AND RING GROUPS 
Your system may have Hunt Groups and a Ring Group . . . 
to which to extend some calls. To call them, you use the Access Code 
listed below in place of a regular extension number. Use this table to 
record the Access Codes used in your company. 
Up to six Hunt Groups . . . 
may be programmed for your system. A number of extensions, usually 
in the same department, can be grouped together in such a way that 
when anyone rings the access number for the group, the system hunts 
around...

ATTENDANT FUNCTION CODES 
A number of Attendant Function Codes . . . 
have been referred to in this guide: they are 2-digit codes dialed after 
pressing FUNCTION. They tell the system what you want to do. Many 
of the codes mimic the action of the console’s Feature Keys. 
Listed below are the Attendant Function Codes vou will use, and any 
related Feature Keys. 
OPERATOR RELATED 
FUNCTION FUNCTION PERFORMED FEATURE 
CODE KEY 
11 
12 
13 
14 
15 
17 
ia 
Puts system into Night Service. Displays NIGHT....

AlTENDANT FUNCTION CODES 
OF 
FU ‘ERATOR RELATED 
INCTION 
FUNCTION PERFORMED CONSOLE 
CODE KEY 
65 
Displays CHANGE ABBREVIATED DIALING ENTRY ? and None 
allows you to change or delete the telephone number 
that corresponds to the 2-digit list entry code that you 
have to dial next. Press RELEASE to return to operating 
mode. 
71 Displays CHANGE WAKE-UP TIME FOR EXT-? and allows 
WAKE-UP 
you to change or delete the Wake-up time for the 
extension number that you have to dial next. Press 
RELEASE to...