Home
>
Mitel
>
Communications System
>
Mitel Sx-2000 Integrated Communications System Control Sheet Manual
Mitel Sx-2000 Integrated Communications System Control Sheet Manual
Have a look at the manual Mitel Sx-2000 Integrated Communications System Control Sheet Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 55 Mitel manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Important Safety Instructions Table 1-7 SX-2000 SG System Sub-assemblies (continued) Page 2 of 3 9125-060-203-NA Issue 1 Revision 0 203 l-27
Safety instructions Table 1-7 SX-2000 SG System Sub-assemblies (continued) Marketing Number Description / Common Name Engineering Minimum Number Revision MM080BA FILTER HOUSING 1070806BA A MM082AA CABLE TROUGH KIT 1 1070826AA A MM089AB FILLER CARD 132887501 B MM136AA CABLE DUCT 1071366AA A MP91 OFA CONTROL CONVERTER II 1079106FA A MPSllCA PERIPHERAL CONVERTER 1079116CA A MP912BA DC CONVERTER 1255493BA A MK149AA ROOF SCREEN ASSEMBLY 134336601 A Page 3 of 3 Note: DSUs listed in Table l-11 and PlCs listed in Table l-l 2 are also suitable for use in the SX-ZOOOSG system. 203 l-28 Revision 0 912!j-O60-203-NA Issue 1
Important Safety Instructions Table l-8 SX-2000 S System Sub-assemblies I I I MA308AA 1 CEPT INTERFACE ASSEMBLY 1 1210563AA A I MA309AA DS-1 INTERFACE ASSEMBLY 1202623AA A MA31 OAA SYSTEM ID MODULE 121060601 B MA320AA CONTROL CABINET 133182601 A I I I MA321AA 1 PERIPHERAL CABINET 1 133186601 A I 2nd CABINET CONTROL COMMUNICATION KIT I I MP914AA 1 AC CONVERTER 1258033AA 1 3 I Note: DSUs listed in Table l-l 1 and PlCs listed in Table l-l 2 are also suitable for use in the SX-2000 S system. 9125-06&203-NA Issue 1 Revision 0 203 l-29
Safety Instructions Table l-9 SX-2000VS System Sub-assemblies MP912BA DC CONVERTER 1255493BA A MP914AA AC CONVERTER 1258033AA 3 Note: DSUs listed in Table l-11 and PlCs listed in Table l-l 2 are also suitable for use in the SX-ZOffOVS system. 203 l-30 Revision 0 9125-060-203-NA Issue 1
Important Safety Instructions Table I-10 SX-2UUO FD System Sub-assemblies Note: DSUs listed in Table 1-11 and PlCs listed in Table 1-12 are also suitable for use in the SX-2000 FD system. 912546&203-NA Issue 1 Revision 0 203 l-31
Safety Instructions I Table I-11 Digital Service Unit (DSU) Cards Marketing Description / Common Name Engineering Minimum Number Number Revision MC260AA CONFERENCE 1072603AA A 1 MC262AA ( ADVANCE TONE DETECTOR 1 1072623AA 1 B 1 MC263AA 1 DS-1 FORMATTER I I 1 1072633AA 1 B 1 MC264AA CEPT FORMATTER 1072643AA B MC265AA DATA TRANSCEIVER (SEE NOTE) 1072653AA A MC266AA 1 COMMUNICATION PROCESSOR ‘Note: Not used in the SX-2000 FD system. 1072663AA 4 I Table 1-12 Peripheral Interface Circuit (PIC) Cards < MC341CA DID/LOOP TIE TRUNK 1073413CA C MC342BB E&M TRUNK 107342388 D MC380AA DTMF RECEIVER 1073803AA B Note: Only used in the SX-2000 SG system. 203 l-32 Revision 0 912!!+060-203-NA Issue 1
Important Safety Instructions Installation of Telecommunications Wiring 1.7 Telecommunications wiring to this product shall conform to all applicable safety and electrical wiring regulations. Installation of telecommunications wiring shall be performed following precautions in accordance with standard industry practice. The precautions to be followed include: 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically de- signed for wet locations. 3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 4. Use caution when installing or modifying telephone lines. 5. To ensure isolation between cabinets, metal sheathing should not be used on fiber cables connecting the SX-2000 FD Control, Peripheral, and DSU cabinets. Con- duit may be used to encase fiber cabling, provided the conduit does not contact the cabinets. 6. The SFT (System Fail Transfer) output connector on an SX-2000 FD system Pe- ripheral Node (see Figure 1-14) shall not be connected to an off-premise application. I Any connection of the assemblies listed below to an outside plant lead, an off- - premise application or any other exposed plant application may result in a fire or shock hazard, and/or defective operation and/or equipment damage. Table 1-13 Restricted Peripheral Interface Circuit Cards Marketing Number Description / Common Name MC320BE ONS LINE CARD I I MC330AA 1 DNI LINE CARD I I MC324AA 1 DATASET LINE CARD I MC323BA COV LINE CARD MC263AA DS-1 FORMAlTER CARD MC264AA CEPT FORMAlTER CARD I MC322BB 1 HIGH SPEED DIGITAL LINE CARD I 9125-06&203-NA Issue 1 Revision 0 203 l-33
Safety Instructions Examples of installations which shall not be permitted for connection to these interfaces are those which: (a) Require protectors in accordance with the National Electrical Code for the United States, NEC, NFPA / ANSI 70, Article 800-30, or, (b) Are “Exposed Plant” as defined in the Canadian Electrical Code -CSA C22.1, para- graph 60-I 00 which states; “Exposed plant means where any portion of the circuit is subject to accidental contact with electric lighting or power conductors operating at a voltage exceeding 300V between conductors or is subject to lightning strikes.” Note: The DS-1 Formatter and the CEPT Formatter cards may be connected to an outside plant lead, an off-premise application or any other exposed plant lead only through a device that has been suitably investigated and approved for those network conditions. 203 l-34 Revision 0 9125-060-203-NA Issue 1
SX-2000s INTEGRATED COMMUNICATIONS SYSTEM Commissioning la AtoZ KELLATRONICS, INC I TM, @-Trademark ol MM Corpomtlon. 0 CopyrIght WBZ, MM CorponUon. All rights resewed. PrInted In Canada a MITE2
ii NOTICE The information contained in this document is believed to be accurate in all re- spects but is not warranted by Mite1 Corporation (MITELB). The information is subject to change without notice and should not be construed in any way as a commitment by Mite1 or any of its affiliates or subsidiaries. Mite1 and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this doc- ument. Revisions of this document or new editions of it may be issued to incor- porate such changes. VTIOO” is a trademark of Digital Equipment Corp. Commissioning Revision 0 912!3-060-204-NA Issue 1