Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual

Attendant Console Description
The display will return to the format it had before leaving the CDE or
Maintenance levels.For further information, refer to SectionMITL9109-094-351-NA, RS-232 Maintenance Terminal.
Tone Signaling
3.34This feature allows the Attendant to send DTMF tones during a
call. COS Option 119
- Attendant Tone Signaling must be en-
abled. When enabled, this option results in the TONES ON 
softkeybeing displayed whenever the Attendant is talking on an internal or
external call. Pressing...

SECTION MITL9109-094-315-NA
II:523 c/w
q FJ >EXITi% F2>ATT FUNCTION q Fs>NIGHT 1q Fd>NIGHT 2m Fs>GUEST ROOM
q F6>APPLIcATIONq FT>ALARMq F~>BELL OFFq F9 >FRANCAISIZj FO>IDENTITYFigure 3-27 Additional Functions
EXIT: 
Softkey Fl (EXIT) allows the Attendant to return to the previous
display; i.e., to exit the function mode.
ATT FUNCTION: 
Softkey F2 (ATT FUNCTION) when pressed will dis-
play prompts as shown in Figure 3-28. These functions allow the
Attendant to do the following:
q F1 >EXIT
q Ffj>ABBR DIAL...

Attendant Console Description
clear the incorrect entry, or the EXIT softkey can be pressed to exit the
SET TIME function.
Ok346 C/W
Enter Time 
(HH:MM) =_
q F1 >EXITq F2>q F3>q F4>q f5>
q Ffj>q F7>HFf3>q Fg>q FO>Figure 3-30 Setting Time of Day
08:346 C/W
Enter Time 
(HH:MM) = 09:34
q F1 >EXITq F2>SETq Fs>p,“,q F4>m F5>
HFfj>q F7>q F8>q Fg>q FO>Figure 3-30a Setting Time of Day
SET DATE: 
Softkey F3 when pressed will display prompts as shown in
Figure 3-31. The Attendant must dial in the 6-digit string...

SECTION MITLSI 09-094-315-NASTATIONS:This key enables the Attendant to enter an extension
number in order to set up Call Forwarding, busy out the station or set
up Message Waiting without calling the extension user. As shown in
Figure 3-32 the Attendant simply has to enter the extension number.
The CALL FWD and BUSY OUT prompts will appear as shown in Figure
3-32a; SET UP MSG prompt appears for a 
SUPERSET 4 telephone or a
SUPERSET 4DN telephone. The -key on the keypad may be used to
change the extension...

Attendant Console Description
Forward when Busy or when there is No Answer (F5).
CANCEL: The Attendant may cancel Call Forwarding for the extension
by pressing this key.
When a call has been forwarded to an Attendant, the console replaces
the COS and COR fields of the source display with the extension
number of the party whose telephone has been forwarded. (Refer to
Figure 3-33b).
1291R. BUDDCOS 49 COR 15IO:35Currently to 1132 AlwaysForward to: 1151
 .D Fz>ALWAySm F3>No ANSWERq F4>oN BUSYq FFi>BUSY/NO...

SECTION MITL9109-094-315-NAwhen the extension becomes idle.
When an Attendant calls an extension which has been busied-out, the
BSY OUT prompt will appear and the Attendant may cancel the 
busied-out condition by pressing 
softkey F2 (CLEAR).
SET UP MSG: This feature enables the Attendant to set up 
system-wide 
SUPERSET telephone messages by the following key sequence:
FUNCTION + ATT. FUNCTION + STATIONS + EXTENSION NUMBER + SET
UP MSG
After the above key sequence has been entered the display will be...

Attendant Console Description
Enter Trunk Number: 72-
q Fl >EXITq Fz>STATUS
HF6>q F7>
IO:35
q F3>ATT ACCESS!8 Fd>BUSY OUTq F5>
q F8>q Fg>m FO>Figure 3-36a Setting Trunk Functions
SRC
II:50 AM
>>>DST TRUNK 12COS 1 COR 1
BUSYFORCED RLSq F3>q F4>q F5>
HFfj>q F7>q F8>0VERRIDEq Fg>IF(-)>Figure 3-36b Override a Busy Trunk
STATUS: The Attendant may view trunk status by pressing this key.
The display will have the format shown in Figure 3-37.
TRUNK 72
Enter Trunk Number: 
72-
H Fl >EXIT@ F2>
q /q>q F7>COS 15 COR...

SECTION MITL9109-094-315-NAidle and causes the display to revert to call processing mode.
NIGHT SWITCHING: The NIGHT1 and NIGHT2 keys are used to place
the areas of the system controlled by a given Attendant Console into
night service. In multi-tenant applications, each tenant may locally
switch into night service without affecting any other tenant, unless
programmed to do so. Pressing the NIGHT1 or NIGHT2 
softkey results
in the night service status being displayed on the Attendant Consoles
affected. If...

Attendant Console Description
WED MARCH 2, 1988Minor Alarmq Fl >EXITq Q>q F3>q F4>
m F6>~0 DISTBq F7>MSG WAITING H f--8>q Fg>Figure 3-40 Alarm Display
IO:35
q F5>
q FO>
FRANCAWENGLISH: When the FRANCAIS softkey is pressed all soft-key labels and Call Processing messages are displayed in French; the
softkey prompt toggles to ENGLISH. Pressing the ENGLISH softkeycauses all 
softkey labels and Call Processing messages to be displayed
in English; the 
softkey prompt toggles to FRANCAIS.
IDENTITY: When the...

SECTION MITL9109-094-315-NACANCEL ALL CALL FORWARDING/CALLBACK: The CANCEL ALL CALL
FORWARDING and CANCEL ALL CALLBACK functions are accessed by
the following key sequence:
FUNCTION + ATT. FUNCTION + MORE + CAN. ALL FWD (or CAN. ALL
CBK)Pressing CAN. ALL FWD will clear all call forwarding; pressing CAN. ALL
CBK will clear all callbacks.
DISA CODE: The DISA CODE softkey allows the Attendant to redefine
the Access Code required for a call originating outside the PABX to
access the 
PABX’s features (Direct...