Minolta magicolor 2200 User Manual
Have a look at the manual Minolta magicolor 2200 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Minolta manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Replacing the Transfer Belt 31 9Rotate the transfer belt lock lever. 10Reinstall the OPC drum cartridge. Downloaded From ManualsPrinter.com Manuals
Replacing the Transfer Belt 32 11Close the transfer belt lock lever. 12Check to make sure the laser lens cover is firmly seated. 13Reinstall the waste toner pack. 14Close the front cover and turn on the printer. 1 2 Downloaded From ManualsPrinter.com Manuals
2 Using Media Downloaded From ManualsPrinter.com Manuals
Introduction 34 Introduction This chapter provides information on handling, selecting, and storing media. Refer to the Maintenance Guide for media specifications. Media Handling Before purchasing a large quantity or special media, do a trial printing with the same media and check print quality. Check with our web site www.minolta-qms.com for a list of current approved media. Attention Do not use the media types listed below. These could cause poor print quality, media jams, or damage to the printer. Do not use media that is „Not approved „Meant for ink jet printers „Folded, embossed, warped, or wrinkled „Perforated or prepunched „Too slick, too coarse „Composed of foil or gilt „Coated with a processed surface (such as carbon paper, heat-sensitive paper, heat- pressure paper) „Irregularly shaped (not rectangular); not uniform in size „Bound with glue, tape, or paper clips „Attached to ribbons, hooks, buttons, etc. Do not use envelopes that have „Sticky flaps Downloaded From ManualsPrinter.com Manuals
Media Types 35 „Metal clasps, fasteners, transparent windows, peel-off strips for sealing „Material that will melt, vaporize, offset discolor, or emit dangerous fumes Do not use labels that have „Label(s) already peeled off „Labels that peel off easily „Glue or sealer that might come off „Material that will melt, vaporize, offset discolor, or emit dangerous fumes Media Types Plain Paper Formatting Format data within your application. Input Upper and Optional Trays500 sheets of 20 lb bond (75 g/m²) paper (letter/A4/legal) each; capacity for other weights varies accordingly. Multipurpose Tray150 sheets of 20 lb bond (75 g/m²) paper; capacity for other weights varies accordingly. Orientation Upper and Optional TraysSimplex—Face up; Duplex—Face down Multipurpose TraySimplex—Face down; Duplex—Face up Ty p e Any standard or recycled office paper suitable for plain-paper laser printers, such as „ Hammermill Laser Print „ Georgia-Pacific Microprint Laser 1000 „ Neusiedler Color Copy 90 „ Xerox 4024 Weight 16–24 lb bond (60–90 g/m²) Duplexing Up to 28 lb bond (105 g/m²) Downloaded From ManualsPrinter.com Manuals
Media Types 36 Letterhead and Memo Media Thick Stock Formatting Format letterhead or memo data within your application. Try printing your data on a plain sheet of paper first to check placement. Input Upper and Optional TraysUp to 500 sheets Multipurpose Tra yUp to 150 sheets Orientation Upper and Optional TraysFace up—top of page toward the right Multipurpose Tra yFace down—top of page toward the printer side Ty p e Any standard or recycled office paper suitable for plain-paper laser printers, such as „ Hammermill Laser Print „ Georgia-Pacific Microprint Laser 1000 „ Neusiedler Color Copy 90 „ Xerox 4024 Weight 16–24 lb bond (60–90 g/m²) Duplexing Upper and Optional TraysFace down—top of page toward the right Multipurpose Tra yFace up—top of page toward the printer side Notes Check your application documentation for other information about printing on letterhead and memo media. Formatting Format the information to be printed on the thick stock within your application. Try printing your data on a plain sheet of paper first to check placement. Input Multipurpose Tray OnlyUp to 50 sheets, depending on the thickness of the media Orientation Face down Downloaded From ManualsPrinter.com Manuals
Media Types 37 Envelopes Ty p e For information about thick stock media recommended for your printer, go to www.minolta-qms.com/support, then click on Answer Base, or contact Technical Support. See the Service & Support Guide for a complete listing of support telephone numbers. Weight Simplex: 24–43 lb bond (90–163 g/m²) Autoduplex: Up to 28 lb bond (105 g/m²) Manual Duplex: 24 lb (90 g/m²) to 43 lb (163 g/m²) bond Duplexing Autoduplexing thick stock over 28 lbs (105 g/m²) is not supported. Thicker stock may be manually duplexed. Notes You should test the number of sheets of thick stock the multipurpose tray can hold to ensure that its performance is acceptable. 43 lb (163 g/m²) bond is also referred to as 90 lb index stock. Formatting Your printer receives the instructions to print on envelopes from your application. „Print on the front side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap. Anything printed in these layered regions may be lost or faded. „See your application documentation for specific information on printing envelopes. Input Multipurpose Tray OnlyUp to 50, depending on the thickness of the envelopes Orientation Face down Ty p e Use common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps, such as „Commercial #10: Columbian Recycled COR02 „International DL: Auto Fil #01914 Duplexing Not supported Notes „You can print only on the address side of the envelope. „Envelopes should be dry. „Do not preload or preseal envelopes. Downloaded From ManualsPrinter.com Manuals
Media Types 38 Labels Postcards Formatting Format label data within your application. Try printing your data on a plain sheet of paper first to check placement. Input Multipurpose Tray OnlyUp to 50 sheets, depending on the thickness of the labels Orientation Face down Ty p e Use only labels recommended for laser printers, such as „ Avery 5260 Weight 16–90 lb (60–163 g/m²) Duplexing Not supported Notes „Avoid using labels with exposed adhesive; it may stick to the transfer belt or the fuser roller, causing labels to peel off and media jams to occur. „Adhesive label stock is supported only in letter or A4 sheets. „A label consists of a face sheet (the printing surface), adhesive, and a carrier sheet — The face sheet must follow the plain paper specification. — The face sheet surface must cover the entire carrier sheet, and no adhesive should come through on the surface. „You can print continuously with label paper. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous print and print one sheet at a time. „Check your application documentation for other information on printing labels. Formatting Format postcard data within your application. Try printing your data on a plain sheet of paper first to check placement. Input Multipurpose Tray OnlyUp to 50 sheets, depending on the thickness of the postcards Orientation Face down Ty p e Use only postcards recommended for laser printers Weight 16–90 lb (60–163 g/m²) Duplexing Not supported Downloaded From ManualsPrinter.com Manuals
Media Types 39 Transparencies Notes If the postcard is warped, press on the warped area before putting in multipurpose tray. Formatting Format the information to be printed on the transparencies within your application. Try printing your data on a plain sheet of paper first to check placement. Input Location Upper and Optional Trays Multipurpose tray Capacity Up to 50 sheets, depending on the thickness of the transparencies If you have problems feeding 50 sheets, try loading only 5–10 sheets at a time. Loading a large number of transparencies at a time may cause static buildup, thus causing feeding problems . Orientation Upper and Optional TraysFace up Multipurpose TrayFace down Ty p e Use any full-color transparencies (also known as OHP film) that meet normal photocopier standards. We recommend „Q-Media Transparency Media for the magicolor 2200 for color printing „3M PP2500 for monochrome printing Duplexing Not supported Downloaded From ManualsPrinter.com Manuals
Loading Media 40 Loading Media Take off the top and bottom sheets of a ream of paper. Holding a stack of approximately 250 sheets at a time, fan the stack to prevent static buildup for the paper before inserting it in a tray. 5Do not fan transparency media. Attention Always load the media short edge first. Attention Do not mix media of different sizes, types, or weights, as this will cause printer jamming. „When refilling media, first remove any media remaining in the tray. Stack it with the new media, even the edges, then reload it. Although the magicolor 2200 was designed Notes„If you touch the face of transparencies with your bare hands, print quality may be affected. „Do not handle transparency media too much. Do not fan transparency media before loading it. Resulting static electricity may cause printing errors. „Keep the media path clean. Transparencies are especially sensitive to a dirty media path. If there are shadows on either the top or the bottom of the sheets, see “Cleaning the Printer Interior” in the Maintenance Guide. „You can print continuously with transparencies. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous print and print one sheet at a time. „Check your application documentation for other information about printing on transparencies. OHP Downloaded From ManualsPrinter.com Manuals