Minolta magicolor 2200 User Manual

							Engine and Controller Specifications 151
General  
Controller  
Printer type
Desktop, non-impact, 4-color printer
Print method Scanner:
 Semiconductor laser with rotating mirror
Recorder:
 Black writing electrophotographic 
Process:
 Cyan, magenta, yellow, and black dry toner image transfer 
to print media
Fuser:
 Heated rollers
Resolution Standard:
 600x600 dpi (1200x1200 dpi standard on GN, EN, and 
DP models)
Optional: 
1200x1200 dpi (additional SDRAM may be required).
Toner Type:
 Microfine, dry, single component
Packaging:
 User-replaceable cartridges
Warm-up time Maximum:
 110 volts: 150 seconds
220 volts: 160 seconds
Input sources Standard:
 500-sheet tray
150-sheet multipurpose tray
Optional:
 500-sheet lower input feeder
Output
250-sheet tray on top of printer
CPU
IDT RC64574
Resident
emulations PostScript
—Level 2 (600/1200 dpi)
HP PCL
—PCL5c, PCL XL, PCL5e/GL2 (HP PaintJet XL300 
compatible; 600 dpi; 600/1200 dpi, GL2 only)
PDF
—Version 1.2
HP-GL
—7475A/7550/Draftmaster (600 dpi)
Lineprinter
—(600 dpi)
Optional 
emulations ImageServer
 (monochrome only)
CGM
LN03+ 
(300 dpi monochrome only)
Downloaded From ManualsPrinter.com Manuals 
						

							Engine and Controller Specifications 152
Fonts PostScript
—137 resident PostScript fonts that can be scaled from 4 
points upward and rotated to any angle in 1° increments; all 
typefaces have multilingual character sets
HP PCL 5e, 5c
—80 scalable and 4 bitmapped fonts
PCL XL
—45 scalable and 9 bitmapped typefaces
HP-GL
—40 resident HP-GL symbol sets
Type 1 / Type 3 Support
—Support for Type 1 and Type 3 
host-resident downloadable PostScript fonts
Tr u e Ty p e
—Support for Type 42 (PostScript format) host-resident 
downloadable TrueType fonts, support for TrueType fonts in PCL
Kanji fonts Hard disk
—MINOLTA-QMS Kanji Internal IDE Hard Disk with 7 
Morisawa fonts
Standard 
interfacesCrownNet for Ethernet
—10BaseT/100BaseTX
Parallel
—Centronics/IEEE 1284 bidirectional
Optional
interfaces Network interface—
Support for one optional network interface 
(CrownNet for Ethernet, supporting EtherTalk, LAN Manager/LAN 
Server, Netware, and TCP/IP; CrownNet for Token-Ring, 
supporting LAN Manager/LAN Server, NetWare, and TCP/IP; or 
Crown for DECnet-TCP/IP)
SCSI interface—
Support for up to 3 external SCSI hard disks (up to 
2.2 GB)/Jaz drives/Zip drives
RAM Ty p e :
 PC-100 Compliant SDRAM DIMMs
N model base system RAM:
 64 MB
GN and EN model base system RAM:
 128 MB
DP model base system RAM:
 256 MB
Total RAM:
 Upgradable to 384 MB (through 3 DIMM connectors)
Optional RAM
32, 64, and 128 MB DIMMs
System software 
Softloadable; stored in Flash ROM
Internal IDE hard 
disk N and GN models:
 Optional, up to 2.2 GB
EN and DP models:
 Standard, up to 2.2 GB
5For information about hard disks recommended for your 
printer, see the magicolor 2200 Answer Base through the 
Internet at http://www.qms.com/support/, or contact 
Technical Support (see the 
Service & Support Guide for a 
complete listing of support telephone numbers).
Downloaded From ManualsPrinter.com Manuals 
						

							Engine and Controller Specifications 153
Electrical
Voltage and Power 
Time-of-day clock N and GN models: 
Optional (socket provided for)
EN and DP models: 
Standard
Job accounting
Crown job accounting; requires an optional IDE drive
Warning function 
convenienceOptional, BuzzBox (light/buzzer printer warning device); operates 
over a parallel connection
Convenience 
copierOptional, SC-210 operates over a parallel connection 
Voltage and 
frequencyUS:
 120 volts ±
10% at 50–60 Hz ±
3 Hz
Japan:
 100 volts ±
10% at 50–60 Hz ±
2 Hz
International:
 220-240 volts +10% at 50–60 Hz ±
3 Hz
Phase
Single
Power
consumptionModeMaximum
Operation
Standby
Power saver 100/120 volts—1000 watts
220 volts—1100 watts
250 watts
45 watts
Compliance ENERGY STAR compliant
Downloaded From ManualsPrinter.com Manuals 
						

							Engine and Controller Specifications 154
Environmental 
Noise level Printing:
 Less than 55 dB (A)
Standby:
 Less than 41 dB (A)
Relative
humidityOperating:
 15-85% RH (noncondensing)
Transportation/Storage: 
30–85% RH (noncondensing)
Temperature
rangeOperating: 
50-95° F (10-35° C)
Transportation/Storage:
 32-95° F (0-35° C)
Altitude Operating:
 0-8202 ft (0-2500 m)
Inclination Operating:
 1° or less slant at any point around the machine
80
60
40 70
50
30
20
0 10
10
2030
17.5 
2732.5
Optimal Operating Range
Acceptable Operating Range
Ambient Humidity (%RH)
50
63.5
6880.68695Cº
Fº
Ambient Temperature
Downloaded From ManualsPrinter.com Manuals 
						

							Print Media 155
Physical 
Print Media 
Main Body Main Body with Lower 
Input FeederMain Body with Duplex 
Unit and Lower Input 
Feeder
Dimensions W: 
18.2 in. (463 mm)
H:
 20.6 in. (511 mm)
D:
 21.3 in. (522 mm)W: 
18.2 in. (463 mm)
H:
 22.0 in. (560 mm)
D:
 21.3 in. (522 mm)W: 
18.2 in. (463 mm)
H:
 22.0 in. (560 mm)
D:
 21.3 in. (522 mm)
Weight 
(excluding 
consumables)Unpacked:
 
87.1 lbs (39.5 kg)Unpacked:
 
Printer: 87.1 lbs 
(39.5 kg)
Lower Input Feeder: 
13.2 lbs (6.0 kg)Unpacked:
 
Printer: 87.1 lbs (39.5 kg)
Lower Input Feeder: 
13.2 lbs (6.0 kg)
Duplex Unit: 3.7 lbs 
(1.7 kg)
Weight 
(including 
consumables)Shipping:
 11 7  l b s  
(53 kg)Shipping
*:
 
Printer: 117 lbs (53 kg)
Lower Input Feeder:
31 lbs (14 kg)Shipping*:
Printer: 117 lbs (53 kg)
Lower Input Feeder: 
14.8 lbs (6.7 kg)
Duplex Unit: 5.3 lbs 
(2.4 kg)
Notes
* Shipped separately.
Delivery—Output 
Tr a yOutput:
 Face-down
Tray Capacity:
 500 sheets of 20 lb bond (75 g/m
2) paper
Delivery—Mailbox Output: 
Face-down
Mailbox Bin Capacity: 
Each bin holds approximately 50 sheets of 
16–24 lb (60–90 g/m
2) bond letter/A4 paper only
Input sources Upper input feeder (500-sheet tray):
 Paper, transparencies
Optional lower input feeder (500-sheet tray):
 Paper, 
transparencies
Multipurpose tray (150 sheet):
 Envelopes, labels, paper, thick 
stock, transparencies
Media sizes, types, 
and weightsSee “Media Types” on page 35.
Downloaded From ManualsPrinter.com Manuals 
						

							Document Option Commands 156
Document Option Commands
This lists the supported Document Option Commands (DOCs) for your magicolor 2200. 
The commands are grouped by feature type.
Each command is preceded by either a DOC statement (%%) or an IncludeFeature 
statement (%%IncludeFeature). See the Crown
 Document Option Commands 
manual for 
information on all other commands.
Supported DOCs 
Header/Trailer Page Commands 
Print charge number %%ChargeNumber
Print copyright statement %%CopyRight: 
Print document creator %%Creator: 
Print creation date and time %%CreationDate: 
Print current date %%Date: 
End comments %%EndComments
Print document owner %%For: 
Print document host %%Host: 
%%Page
Job completion notification via email %%Notify
Select page order %%PageOrder
Save job for reprinting (proof and print) %%Retain proof 
Print routing information %%Routing: 
Print document title %%Title: 
Print version and revision %%Version: 
Print header page %%IncludeFeature: header
Print trailer page %%IncludeFeature: trailer
Notes
The maximum media weight supported for duplex printing is 28 lb 
bond (105 g/m
2).
Downloaded From ManualsPrinter.com Manuals 
						

							Supported DOCs 157
HP-GL Emulation Commands
Select enhanced resolution %%IncludeFeature: enhanced
Expand plot %%IncludeFeature: expand
Select original paper size %%IncludeFeature: size
Select pen width and color %%IncludeFeature: pen
Select plotter %%IncludeFeature: plotter
Scale the image %%IncludeFeature: scaling
Set origin %%IncludeFeature: origin
HP PCL 5e Emulation Commands
Install object %%IncludeFeature: install
Remove object %%IncludeFeature: remove
Remove resource %%IncludeFeature: removeresource
Retain temporary %%IncludeFeature: retaintemporary
Select default font %%IncludeFeature: font
Select default font ID %%IncludeFeature: fontid
Reset %%IncludeFeature: reset
Select scalable fonts %%IncludeFeature: scalablefonts
Select symbol set %%IncludeFeature: symbolset
Set carriage return to CR+LF %%IncludeFeature: criscrlf
Set linefeed to CR+LF %%IncludeFeature: lfiscrlf
Set number of lines per inch %%IncludeFeature: linesperinch
Set point size %%IncludeFeature: pointsize
Resource %%IncludeFeature: resource
Set monochrome GL/2 %%IncludeFeature: monochromegl
Lineprinter Emulation Commands
Select font for current job %%IncludeFeature: font
Set point size for current job %%IncludeFeature: pointsize
Specify character map type %%IncludeFeature: map
Number lines %%IncludeFeature: number
Set tabs %%IncludeFeature: tabs
Set linefeed to CR+LF %%IncludeFeature: lfiscrlf
Set carriage return to CR+LF %%IncludeFeature: criscrlf
Downloaded From ManualsPrinter.com Manuals 
						

							Supported DOCs 158
Set formfeed to CR+FF %%IncludeFeature: ffiscrff
Wrap lines %%IncludeFeature: autowrap
Set number of lines per page %%IncludeFeature: linesperpage
Set margins %%IncludeFeature: lpmargins
Set orientation %%IncludeFeature: lporientation
PostScript Emulation Command
SC 200 to set PostScript protocol %%IncludeFeature: parpsprotocol x
CCITT Groups 3 and 4 Commands
Start decompression %%ImageData
Set encoded byte flag %%EBAMode
Set end of block %%BlockEnd
Set line end %%LineEnd
Eject page %%PageEnd
Set image position %%ImagePosition
Invert image %%InvertImage
Set dpi for image expansion %%DPI
Set data compression %%Compression
Reverse bits %%BitReverse
End print job %%JobEnd
Set image size %%ImageSize
Set image rotation %%Rotation
Set source image origin %%SourceImageOrigin
Set source image position %%SourceImagePosition
Document Formatting
Logical page orientation %%IncludeFeature: pageorientation
Number up printing %%IncludeFeature: pagegrid
Offset logical page %%IncludeFeature: pageoffsets
Print borders %%IncludeFeature: border
Scale logical page %%IncludeFeature: pagescaling
Print background images %%IncludeFeature: background
Set printer resolution %%IncludeFeature: resolution
Downloaded From ManualsPrinter.com Manuals 
						

							Supported DOCs 159
Print page range %%IncludeFeature: pagerange
Duplex printing %%IncludeFeature: duplex
Collate print job %%IncludeFeature: collate
Logical page size %%IncludeFeature: pagesize
Select number of copies %%IncludeFeature: numcopies
Select paper %%IncludeFeature: input
Select orientation %%IncludeFeature: orientation
Select emulation %%IncludeFeature: emulation
Logical margins %%IncludeFeature: margins
Select color separations %%IncludeFeature: colorseparation
Select color or monochrome %%IncludeFeature: colormodel
Media type %%IncludeFeature: mediatype
Job and Subjob Boundary Commands
Sessions (only via network interface) %%Session
End of document %%EndOfDocument
%-12345x
LN03+ Commands
Identify product %%IncludeFeature: product
Control line wrap %%IncludeFeature: autowrap
Specify default paper size %%IncludeFeature: paper_size
Control transformation point %%IncludeFeature: paper_size_override
Adjust image horizontally %%IncludeFeature: xorigin
Adjust image vertically %%IncludeFeature: yorigin
Set power-up configuration %%IncludeFeature: reset_override
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals