Minolta magicolor 2200 User Manual

							Time-of-Day Clock (Standard on Models EN and DP) 131
3Attach the time-of-day clock 
to the controller board.
Attention
Make sure that the pins on the time-of-day clock are properly aligned with 
those in the receiving socket on the controller board. Damage to the time-of-day 
clock and/or controller board could result if the pins are misaligned.
aLocate the time-of-day clock socket on the controller board and the pin 1 notch or 
printed label.
bLocate the pin 1 indicator mark on the top of the time-of-day clock. 
This mark may be a notch or a slight depression on one end of the clock.
cAlign this indicator mark with the pin 1 notch or printed label on the controller 
board.
dGently press down on the time-of-day clock until it’s firmly seated.
5Reinstall the controller board.
Gently slide the controller board into the printer until it is fully seated, and then 
tighten the two screws.
6Reconnect all interface cables.
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII      IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII      IIIIIIIII................................................      ........................      ..........................................................      ........................      ..........................................................      ........................      ..........................................................      ........................      ..........
Downloaded From ManualsPrinter.com Manuals 
						

							Time-of-Day Clock (Standard on Models EN and DP) 132
7Reconnect the power cord and turn on the printer.
5In compliance with UL guidelines, “The appliance inlet is considered to be the main 
disconnect device.”
8Print a startup page. 
The time-of-day clock is not listed under “Installed Options” on the startup page, 
but the time will appear as System Date in the Printer Information column.
Downloaded From ManualsPrinter.com Manuals 
						

							6
Color Printing
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction 134
Introduction
Your magicolor 2200 features advanced color laser technology that produces inexpensive 
and durable color prints at 600x600, and 1200x1200 dpi on plain paper, envelopes, labels, 
thick stock, and transparencies.
Color Management and Control
The magicolor 2200 offers a host of color screening, matching, and calibration tools for 
both the beginner and professional color user.
MINOLTA-QMS QCOLOR Technology
Color management does not mean all devices will match exactly. It does ensure the closest 
possible color transformation. MINOLTA-QMS Q
COLOR technology offers four methods 
for color matching across devices:
„MINOLTA-QMS QCOLOR automatic color correction
„Supplied ICC printer profiles
„Built-in color rendering dictionaries (CRDs)
„Supplied PANTONE®* Color matching tables
MINOLTA-QMS Q
COLOR technology takes the guesswork out of color reproduction by 
automatically optimizing color output. Now even a novice can produce professional 
quality, colorized documents without the use of sophisticated manual optimization 
techniques.
The following is a summary of MINOLTA-QMS Q
COLOR automatic color correction 
features:
„Ease of use across applications:
 With MINOLTA-QMS QCOLOR, it’s as easy to get 
great color from a PowerPoint presentation as it is from a desktop publishing applica-
tion, such as QuarkXPress. MINOLTA-QMS Q
COLOR’s color matching methods are 
simple for both novice and professional color users to navigate.
*. Pantone, Inc.’s check-standard trademark for color reproduction and color reproduction materials.
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction 135
„Single-button control:
 Whether accessing through the printer driver, or from the 
printer’s front panel, MINOLTA-QMS Q
COLOR’s single-button controls enable auto-
matic correction of uncalibrated RGB or CMYK color files.
„Printer-resident CMS:
 Because MINOLTA-QMS QCOLOR automatic color correc-
tion is built into the printer, it works well in all computing environments and with 
most design, publishing, and office applications.
„Industry-standard profiles:
 QCOLOR uses industry-standard ICC profiles for compat-
ibility with popular input and output devices.
„Supports host-based color management systems:
 Easily disable MINOLTA-QMS 
Q
COLOR automatic color correction when using host-based ColorSync or ICM color 
matching.
„Profiles for common monitors and output devices:
 MINOLTA-QMS QCOLOR offers 
default color matching for a variety of common monitors and printing presses.
„Download device profiles:
 For custom color matching, QCOLOR supports downloaded 
(to disk only) ICC profiles.
„Support for Internet standard:
 MINOLTA-QMS QCOLOR uses sRGB for Inter-
net-standard default color matching.
„Individual page element correction:
 QCOLOR separately color corrects (matches) 
graphics, text, and images on a singe page using printer-resident CRDs.
Further Information
For further information about the MINOLTA-QMS color management, refer to the 
CrownBook
.
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							7
Repacking the Printer
Downloaded From ManualsPrinter.com Manuals 
						

							Storing the Printer 138
Storing the Printer
Keep the following in mind when storing the printer for an extended period:
1Unplug the printer.
2Remove the OPC drum, the fuser oil roller, and toner cartridges from the printer and 
return them to their original packaging. If the original packaging is not available, 
protect the toner cartridges from spilling toner, and protect the OPC drum cartridge 
from damage and light.
Relocating Your Printer
Occasionally, you may have to move your printer to a different location, either nearby or 
to a distant location. To avoid damage to your printer, we advise you to follow the next 
instructions very carefully.
1Turn off the power to your printer.
2If the printer has a lower feeder unit and/or a 5-bin mailbox, remove them.
3If you are moving to a distant location, follow the instructions for repacking 
the printer.
4Relocate the printer.
WARNING!
The printer weighs about 87.1 lb (39.5 kg). Always have two people to lift and move the 
printer to avoid back injury.
5Unpack and set up the printer in its new location.
6Reinstall the accessories you removed in step 2.
Refer to the Service & Support Guide
 or www.minolta-qms.com for additional 
information on where to obtain assistance if necessary.
Downloaded From ManualsPrinter.com Manuals 
						

							Repacking the Printer 139
Repacking the Printer
If you need to relocate or ship your printer after it’s been installed, follow the procedures 
in this chapter to prevent damage to the printer and to keep your warranty valid.
5If you’re returning just the printer for service, do not return the interface cables, power 
cable, documentation, media tray(s), or accessories.
Attention
MINOLTA-QMS cannot be held responsible for damage to your printer during 
shipment that results from the improper packaging of your printer. You must use the 
instructions given in this section before repacking the printer in its original shipping 
carton with the original packing materials. These supplies must be replaced prior to 
re-shipping the printer.
If you need replacement packaging, in the United States, call MINOLTA-QMS 
Spares at 1 (334) 633-4300 x2530 and request part number 2600674-901 for the 
repacking kit. For locations outside the United States, refer to the Service & Support 
Guide
 or www.minolta-qms.com. If you need to return the printer for service, be sure 
to write the RMA (Return Merchandise Authorization) number you received from 
your customer support representative clearly on the carton before shipping 
the printer.
Whats Involved?
Repacking your printer for shipment involves the following steps. Each is described in 
more detail in the following sections.
1Remove the cables.
2Remove the fuser oil roller.
3Remove the toner cartridges.
4Remove the waste toner pack.
5Remove the OPC drum.
6Remove the transfer belt.
Downloaded From ManualsPrinter.com Manuals 
						

							Repacking the Printer 140
7Remove the duplex unit (if attached).
8Remove the 5-bin mailbox (if attached).
9Remove the lower input feeder (if attached).
10Repack the printer for shipment.
Attention
To avoid toner contamination during shipment, the printer should be repacked 
without the fuser oil roller, toner cartridges, waste toner pack, OPC drum 
cartridge, or transfer belt installed.
Remove the Cables 
1Turn off the printer.
2Remove the power cable and all interface cables.
Remove the Fuser Oil Roller
WARNING!
The fuser unit can become extremely hot and cause severe burns. Make sure the 
unit is cool before handling it. 
1Open the printer’s top cover.
2Rotate the two lock levers to release the fuser oil roller. 
3Remove the fuser oil roller.
4Store the fuser oil roller in its original shipping bag. 
5Close the printer’s top cover.
Remove the Toner Cartridges 
1Open the printer’s front cover.
2Remove the four toner cartridges and store them in their original packaging.
Downloaded From ManualsPrinter.com Manuals