Lucent Technologies TransTalk 9000 Digital Wireless System MDW 9030P Wireless Pocketphone Installation And Use Manual

Using the MDW 9030P Pocketphone  3-13 Using Wireless Test Mode Using Wireless Test ModeUsing Wireless Test Mode Using Wireless Test Mode
Using Wireless Test Mode
You can determine sound clarity, signal strength, and voice quality using Wireless Test Mode.
You can also use Wireless Test Mode to identify which radio module matches your handset.
NOTE: NOTE:NOTE: NOTE:
NOTE:
Ignore anything that displays if you press 
4 or 5 while in Wireless Test Mode. These
displays are for Lucent Technologies technicians’...

3-14   Using the MDW 9030P Pocketphone
Performance/Range Test in Wireless Test Mode Performance/Range Test in Wireless Test ModePerformance/Range Test in Wireless Test Mode Performance/Range Test in Wireless Test Mode
Performance/Range Test in Wireless Test Mode
Using the signal-strength test and the voice-quality test together, you can determine the
range in which your MDW 9030P Pocketphone performs best at your site:
At 10–15 feet (3.1–4.6 m) from its radio module, use the following procedure:
1. Make...

Using the MDW 9030P Pocketphone  3-15
 Waking Up the Phone  Waking Up the Phone Waking Up the Phone  Waking Up the Phone
 Waking Up the Phone
In addition to On and Off, the MDW 9030P has an energy-saving sleep or standby
mode.  The MDW 9030P goes to sleep 15 seconds after activity ceases (that is, after an
alert stops ringing or after you hang up).
The 
O and  buttons wake up the phone.  The headset and handset O
buttons turn the phone on, and the Select button () signals the phone that activity is...

3-16   Using the MDW 9030P Pocketphone
Manually Selecting a Line or Programmed Button Manually Selecting a Line or Programmed ButtonManually Selecting a Line or Programmed Button Manually Selecting a Line or Programmed Button
Manually Selecting a Line or Programmed Button
When you are making or answering a call, the MDW 9030P automatically selects the line for
you.  In some situations, however, you may want to select a particular line (for example, to
use an 800 line).  To select a particular line or...

Using the MDW 9030P Pocketphone  3-17
Using a Headset Using a HeadsetUsing a Headset Using a Headset
Using a Headset
Lucent Technologies offers the Supra 9030 headset, which is specifically designed for
use with your MDW 9030P wireless phone.  A headset assists in call answering, and
provides hands-free operation.
For ordering information, see Ordering Replacement & Optional Parts in Chapter 4.
To use the Supra 9030 headset, hold its cord with the UP label facing you, and insert the
plug directly into...

3-18   Using the MDW 9030P PocketphonePlacing Calls with a Headset Placing Calls with a HeadsetPlacing Calls with a Headset Placing Calls with a Headset
Placing Calls with a Headset
To place a call with a headset:
1. Press the On/Off button near the antenna or the 
O button near the dialpad to
access an available line.
The microphone and earpiece in the handset are disabled.
2. Dial the call as you would on a wired system phone.
3. Press either the On/Off button near the antenna or the 
O button near the...

Using the MDW 9030P Pocketphone  3-19
The Battery Charger The Battery ChargerThe Battery Charger The Battery Charger
The Battery Charger
The battery charger charges battery packs in the Spare battery compartment and in the
handset. If both are present at the same time, charging in the Spare battery compartment
is suspended until the battery pack in the handset is fully charged. To enable extended
phone usage, you should purchase an extra battery pack and store it in the charger, so
that you always have a...

3-20   Using the MDW 9030P Pocketphone
The color of the battery chargers LEDs indicates the state of the corresponding battery
pack, as shown in the following table:
NOTE: NOTE:NOTE: NOTE:
NOTE:
Before you use the MDW 9030P Pocketphone handset for the first time, the battery
pack must be charged.
Battery charger
LED shows...If it is the SPARE LED,
the battery pack in the
Spare battery
compartment...If it is the HANDSET
LED, the battery pack
in the Handset...If it is the REFRESH
LED, the Refresh
button...

Using the MDW 9030P Pocketphone  3-21
Extending Battery Life Extending Battery LifeExtending Battery Life Extending Battery Life
Extending Battery Life
The battery charger will charge a battery pack in the handset if you simply insert the
handset in the battery chargers handset cradle; however, the Refresh process fully dis-
charges the battery pack before recharging it, thereby ensuring the best possible charge.
Memory effect reduces a batterys capacity, and can occur when you repeatedly recharge
a...

3-22   Using the MDW 9030P Pocketphone
Follow these steps to ensure an uninterrupted supply of power to your MDW 9030P
Pocketphone:
nIf you have only one battery pack, be sure to refresh it at least once a week.  You can
refresh it by:
– Placing it in the Spare battery compartment of the battery charger.
– Leaving it in the handset, placing the handset in the handset cradle of the battery
charger, and pressing the REFRESH button.
nIf you have two battery packs, exchange the packs between the handset and...