Lucent Technologies TransTalk 9000 Digital Wireless System MDW 9030P Wireless Pocketphone Installation And Use Manual

Installing the MDW 9030P Pocketphone
          
  2-29
Installation Self-Test Installation Self-TestInstallation Self-Test Installation Self-Test
Installation Self-Test
Upon installation, the POWER and PASS LEDs on each radio module will light. The radio
modules then initiate a 2-minute self-test and synchronization. If a radio module’s PASS LED
does not light, repower the module or its carrier. Refer to Chapter 5, “Troubleshooting,” if
the PASS LED still does not light.
NOTE: NOTE:NOTE: NOTE:
NOTE:
The...

2-30
              
   Installing the MDW 9030P Pocketphone
Handset
This section explains how to install the handset battery pack, change the communications
system setting, and fill out the handset label.
Inserting and Removing the Inserting and Removing theInserting and Removing the Inserting and Removing the
Inserting and Removing the
Handset’s Battery Pack Handset’s Battery PackHandset’s Battery Pack Handset’s Battery Pack
Handset’s Battery Pack
1
2
To insert the battery pack into the handset,
insert...

Installing the MDW 9030P Pocketphone
          
  2-31
Changing the Communications System Setting Changing the Communications System SettingChanging the Communications System Setting Changing the Communications System Setting
Changing the Communications System Setting
The communications system you use determines what information the MDW 9030P Pocket-
phone can display and how the phone lines and programmable/intercom/drop buttons are
identified (see Button Mapping in Chapter 6, MDW 9030P Pocketphone...

2-32
              
   Installing the MDW 9030P Pocketphone
Filling Out the Handset Label Filling Out the Handset LabelFilling Out the Handset Label Filling Out the Handset Label
Filling Out the Handset Label
The MDW 9030P Pocketphone display shows the status of up to 12 lines or program-
mable/intercom/drop buttons. Since the MDW 9030P is compatible with several different
communications systems, diagrams of the button mapping for these systems are provided
in Chapter 6.
The MDW 9030P has a label on the...

Installing the MDW 9030P Pocketphone
          
  2-33
Battery Charger
This section explains how to choose a location for the battery charger and install it. It also
explains how to insert and remove a battery pack.
Positioning the Battery Charger Positioning the Battery ChargerPositioning the Battery Charger Positioning the Battery Charger
Positioning the Battery Charger
The battery charger can be placed on a desk, or it can be mounted on a wall. Before you
install the battery charger, note the...

2-34
              
   Installing the MDW 9030P Pocketphone
Plug the battery chargers power cord/AC
adapter into a properly grounded 3-prong wall
outlet that is not controlled by an on/off switch.7
Place the keyhole-shaped openings in the back
of the battery charger over the screw heads
and wall spacers, then slide the battery charger
downward into the groove in the wall spacers to lock
it into place.
5Insert the battery charger’s power cord/AC
adapter into the battery charger.  If you are
desk-mounting...

Installing the MDW 9030P Pocketphone
          
  2-35 Inserting a Battery Pack into Inserting a Battery Pack intoInserting a Battery Pack into Inserting a Battery Pack into
Inserting a Battery Pack into
the Spare Battery Compartment the Spare Battery Compartmentthe Spare Battery Compartment the Spare Battery Compartment
the Spare Battery Compartment
Slide the battery pack into the Spare battery compartment until it is firmly seated with the
back of the battery pack against the back of the Spare battery...

2-36
              
   Installing the MDW 9030P PocketphoneInserting the Handset into the Inserting the Handset into theInserting the Handset into the Inserting the Handset into the
Inserting the Handset into the
Battery Chargers Handset Cradle Battery Chargers Handset CradleBattery Chargers Handset Cradle Battery Chargers Handset Cradle
Battery Chargers Handset Cradle
Correct positioning of the handset in the charger is important to ensure proper charging.
Position the handset (with its battery pack...

Using the MDW 9030P Pocketphone  3-1
Using the MDW 9030P Pocketphone Using the MDW 9030P PocketphoneUsing the MDW 9030P Pocketphone Using the MDW 9030P Pocketphone
Using the MDW 9030P Pocketphone
3
Important Safety Instructions Important Safety InstructionsImportant Safety Instructions Important Safety Instructions
Important Safety Instructions
Please see Important Safety Instructions at the beginning of Chapter 2.
The Handset The HandsetThe Handset The Handset
The Handset
This section describes the...

3-2   Using the MDW 9030P Pocketphone
AB
234 6 5
MSG2125551212
ON78
CD
1
TransTalk
On/Off
Feat/P
Conf
GHI
PQRS
OPERTrans
HoldRedial
12
4
JKL ABC
3DEF
5MNO6
TUV8
0WXYZ9 7
Mute
Antenna
Extend fully or retract fully to
use handset.  Extend fully to
maximize the handset range
and voice quality.
Handset Controls Handset ControlsHandset Controls Handset Controls
Handset Controls
Hold
Press to put a call on hold.
Conf (Conference)
Press to conference in (add)
another party to your call.
Trans (Transfer)
Press...