Lucent Technologies TransTalk 9000 Digital Wireless System MDW 9030P Wireless Pocketphone Installation And Use Manual

5-16   Troubleshooting
Battery Charger Problems (continued) Battery Charger Problems (continued)Battery Charger Problems (continued) Battery Charger Problems (continued)
Battery Charger Problems (continued)
Symptom Possible SolutionsPossible Causes
SPARE LED flashes red.
Battery pack is defective.If you have a battery pack in
the handset and one in the
Spare battery compartment,
remove both battery packs
from the charger to clear the
red flashing LED.  Then test
each battery pack separately
as follows:...

MDW 9030P Pocketphone Compatibility
              
   6-1
MDW 9030P Pocketphone Compatibility MDW 9030P Pocketphone CompatibilityMDW 9030P Pocketphone Compatibility MDW 9030P Pocketphone Compatibility
MDW 9030P Pocketphone Compatibility
6
Programming and Programming andProgramming and Programming and
Programming and
Call Handling Instructions Call Handling InstructionsCall Handling Instructions Call Handling Instructions
Call Handling Instructions
The MDW 9030P Pocketphone can display the status of up to...

6-2
              
   MDW 9030P Pocketphone Compatibility
NOTE: NOTE:NOTE: NOTE:
NOTE:
The MDW 9030P Pocketphone is fully compatible with the PARTNER family of commu-
nication systems. For the remaining communications systems, however, you must
carefully note the functional differences between your wireless phone and the phone
type identified in the table on the previous page.  Differences are summarized on the
following pages.
Some systems do not support display features.  In these cases, the display is...

MDW 9030P Pocketphone Compatibility
              
   6-3
Communications System Compatibility
This section describes some communications-system-dependent programming to help
you optimize the performance of your MDW 9030P Pocketphone.  It also describes how
the buttons on a wired phone for your communications system map to the buttons on
your MDW 9030P.  Turn to the information appropriate to your communications system:
nPARTNER
nMERLIN
nSystem 25, System 75, System 85, and DEFINITY
PARTNER Systems...

6-4
              
   MDW 9030P Pocketphone CompatibilitySetting the Line-Ringing Options Setting the Line-Ringing OptionsSetting the Line-Ringing Options Setting the Line-Ringing Options
Setting the Line-Ringing Options
Use the following guidelines to ensure optimal voice quality when using MDW 9030P
Pocketphones with a PARTNER, PARTNER Plus, or PARTNER II system in key mode:
Telephone
Communications
SystemSystem with Two Carriers
(one control and one expansion
carrier)System with Three Carriers
(one...

MDW 9030P Pocketphone Compatibility
              
   6-5
MERLIN Systems MERLIN SystemsMERLIN Systems MERLIN Systems
MERLIN Systems
nOn MERLIN II and MERLIN LEGEND systems, you must connect your wireless phone
to an available jack on either a 408 outside line/analog telephone module or a 008
analog telephone module.
nSince the MDW 9030P does not have a speaker function, the Voice Announce feature
must be disabled. It is recommended that you use MERLIN 206/410/820 systems
installed with Feature Package 2...

6-6
              
   MDW 9030P Pocketphone CompatibilityButton Mapping for MERLIN Systems Button Mapping for MERLIN SystemsButton Mapping for MERLIN Systems Button Mapping for MERLIN Systems
Button Mapping for MERLIN Systems
except MERLIN 410 and MERLIN 820 except MERLIN 410 and MERLIN 820except MERLIN 410 and MERLIN 820 except MERLIN 410 and MERLIN 820
except MERLIN 410 and MERLIN 820
On all MERLIN systems, the MDW 9030P emulates a Model BIS-22D phone (Apparatus
Code 7315H).  However, the BIS-22D...

MDW 9030P Pocketphone Compatibility
              
   6-7 Button Mapping for MERLIN 410 and MERLIN 820 Systems Button Mapping for MERLIN 410 and MERLIN 820 SystemsButton Mapping for MERLIN 410 and MERLIN 820 Systems Button Mapping for MERLIN 410 and MERLIN 820 Systems
Button Mapping for MERLIN 410 and MERLIN 820 Systems
Following is a diagram of the button assignments on a BIS-22D phone used for MERLIN
410 and 820 systems, and the corresponding assignments on the MDW 9030P Pocket-
phone.   (See the...

6-8
              
   MDW 9030P Pocketphone CompatibilitySetting the Line Ringing Options Setting the Line Ringing OptionsSetting the Line Ringing Options Setting the Line Ringing Options
Setting the Line Ringing Options
Use the following guidelines to ensure optimal voice quality when using MDW 9030P
Pocketphones with MERLIN, MERLIN Plus, and MERLIN II:
Telephone
Communications
SystemSystem with Two Carriers (one
control and one expansion
carrier)System with Three Carriers (one
control and two...

MDW 9030P Pocketphone Compatibility
              
   6-9 System 25, System 75, System 85, System 25, System 75, System 85,System 25, System 75, System 85, System 25, System 75, System 85,
System 25, System 75, System 85,
and DEFINITY Systems and DEFINITY Systemsand DEFINITY Systems and DEFINITY Systems
and DEFINITY Systems
nThis phone must be administered as a BIS-22D MERLIN set (Apparatus Code 7315H)
for the following systems:
—System 25
—System 75—R1V1, R1V2, and R1V3
—System 85—R2V1, R2V2, R2V3, and...