Lucent Technologies TransTalk 9000 Digital Wireless System MDW 9030P Wireless Pocketphone Installation And Use Manual

6-10
              
   MDW 9030P Pocketphone Compatibility
2ABC13DEF
5JKL4GHI6MNO
8TUV7PRS9WYZ
0Oper*#
SpeakerphoneVolumeMicrophoneHFAI Conference Set
Fwd StartTimer
Rev Stop
Exit Contrast Time/
Timer
Hold/
Pause Transfer
MessageRecall
BIS-34D
B
C
1
23 A
8
4
5
6
7
D
AB23 4 6 5MSG212 555 1212
ON78
CD1
TransTalk
On/OffFeat/P
ConfGHIPQRS
OPERTrans
HoldRedial
12
4JKL ABC3DEF5MNO6TUV8
0WXYZ9 7
Mute
ON
Drop
The 7315H phones are programmed for DEFINITY systems using three STATION Admin-
istration screens....

MDW 9030P Pocketphone Compatibility
              
   6-11
The following illustrations show in parentheses the MDW 9030P Pocketphone button
assignments on Pages 2 and 3 of the STATION Administration screens.  The button
labeled D on the MDW 9030P Pocketphone display automatically defaults to the button
labeled D (Drop) on the 7315H phones.
For DEFINITY systems, you must assign the Scroll and Display features to buttons.  If your
users do not need these features, assign them to nonappearing MDW 9030P...

6-12
              
   MDW 9030P Pocketphone CompatibilitySetting the Line Ringing Options Setting the Line Ringing OptionsSetting the Line Ringing Options Setting the Line Ringing Options
Setting the Line Ringing Options
Use the following guidelines to ensure optimal voice quality when using MDW 9030P
Pocketphones with System 25, System 75, System 85, and DEFINITY systems:
Telephone
Communications
SystemSystem with Two Carriers
(one control and one expansion
carrier)System with Three Carriers
(one...

Warranty and Repair Information
              
   A-1
Warranty and Repair Information
A
Lucent Technologies Limited Warranty
and Limitation of Liability
Lucent Technologies warrants to you, the customer, that your wireless telephone system will
be in good working order on the date Lucent Technologies or its Authorized Dealer delivers
or installs the system, whichever is later (“Warranty Date”). If you notify Lucent Technologies
or its Authorized Dealer within one year of the Warranty Date that your...

A-2
              
   Warranty and Repair Information
nAbuse, misuse, or negligent acts or omissions of the customer and persons under the
customer’s control; or
nActs of third parties and acts of God. LUCENT TECHNOLOGIES’S OBLIGATION TO
REPAIR, REPLACE, OR REFUND, AS SET FORTH ABOVE, IS YOUR EXCLUSIVE
REMEDY.
EXCEPT AS SPECIFICALLY SET FORTH ABOVE, Lucent Technologies, ITS AFFILIATES,
SUPPLIERS, AND DEALERS MAKE NO WARRANTIES, EXPRESS OR IMPLIED, AND
SPECIFICALLY DISCLAIM ANY WARRANTIES OF...

Warranty and Repair Information
              
   A-3
Post-Warranty Repairs Post-Warranty RepairsPost-Warranty Repairs Post-Warranty Repairs
Post-Warranty Repairs
If you purchased the system from Lucent Technologies and you have a post-warranty
service contract, Lucent Technologies service is provided under the terms of that contract.
To significantly reduce unexpected repair costs after the warranty period, you can pur-
chase a post-warranty service contract from Lucent Technologies. If you do not have...

Regulatory Information
              
   B-1
Regulatory Information
B
This appendix contains information about the Federal Communications Commission and
Industry Canada.
FCC Part 15 Rules
The Lucent Technologies MDW 9030P Wireless Pocketphone has been tested and has been
found to comply with 
FCC Part 15 Rules. These specifications are designed to provide reason-
able protection against harmful interference in a commercial or residential installation. This
wireless telephone generates, uses, and can...

Specifications   C-1
Specifications
C
GENERAL
Model:MDW 9030P Wireless Pocketphone
DimensionsHandset6.0(L) x 1.0(D) x 2.25(W) 0.33 lbs
and Weights:15.24 x 2.54 x 5.71 cm 0.15 kgs
Handset w/Battery Pack 6.0(L) x 1.0(D) x 2.25(W) 0.55 lbs
15.24 x 2.54 x 5.71 cm 0.25 kgs
Battery Charger (BC) 9.75(L) x 5.13(H) x 3.94(W) 1.00  lbs
24.77 x 13.03 x 10.01 cm
0.45 kgs
Battery Charger w/ 9.75(L) x 5.13(H) x 3.94(W) 1.22 lbs
Battery Pack 24.77 x 13.03 x 10.01 cm 0.55 kgs
Battery Pack 3.0(L) x .75(H) x 2.5(W)  0.22...

C-2   Specifications
GENERAL (continued)
ElectricalHandset1.0 watt
Specifications:Battery Charger (BC) 15 watts
(Power)Radio Module (RM) 4.0 watts
Carrier (CA) w/6 RMs 24.0 watts
Power Supply (BC) 15 watts (10V 1.5 A)
Power Supply (RM) 6.0 watts (10V 600mA)
Power Supply (CA) 30.0 watts (9V)
Battery Pack Life:Nickel  Metal  Hydride 3 hours talk time/22 hours standby time
RF SYSTEM
PARAMETERS
Frequency Band:902 - 928 MHz
Channel Spacing:150 KHz
Total Channel
Capability:50 (Channels Dynamically allocated...

   Index    IN–1
Index IndexIndex Index
Index
A AA A
A
Alerter 3-4, 3-7, 3-11
Alerter icon 3-4
Answering a call 3-15, 3-17
Antenna 3-2, 3-6, 3-8
replacement 4-4, 4-5
B BB B
B
Battery charger
about 1-1, 3-19
illustration 1-4, 2-34, 3-19
inserting the spare battery pack 2-34
installation 2-32
positioning 2-32
power supply 2-3, 4-5
problems 5-13
refreshing battery pack 3-21
removing the spare battery 2-34
replacement 4-5
Battery icon 3-4, 3-6, 3-21, 5-6
Battery pack
charging in battery charger 2-34
disposal...