Lucent Technologies TransTalk 9000 Digital Wireless System MDW 9030P Wireless Pocketphone Installation And Use Manual

Introduction
              
   1-5
Additional Parts Additional PartsAdditional Parts Additional Parts
Additional Parts
The following parts may be necessary, depending upon your installation.
This Kit of Parts is required only when a single (stand-alone) MDW 9030P Pocketphone is
installed:
Radio Module 11-foot (3.4 m)
Power Cord/AC AdapterRubber Feet (4)
Philips Head
Wood Screws (2)Wall Mounting
Plate
These additional parts are required when two or more MDW 9030P Pocketphones are
installed in the same...

1-6
              
   Introduction
Spare Battery and Headset Spare Battery and HeadsetSpare Battery and Headset Spare Battery and Headset
Spare Battery and Headset
One nickel metal hydride battery pack, which provides up to 3 hours of talk time, comes
with your MDW 9030P Pocketphone.  For extended phone usage, you should purchase an
additional battery pack.  You can store the extra battery pack in the Spare battery compart-
ment of the battery charger. Then when the battery pack in the handset is low,...

Installing the MDW 9030P Pocketphone
          
  2-1
Installing the MDW 9030P Pocketphone
2
Important Safety Instructions
This book contains instructions related to safety labels on the product:
!The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
!WARNING indicates the presence of a hazard that can cause severe or fatal
personal injury if the hazard...

2-2
              
   Installing the MDW 9030P Pocketphone
Guidelines for Safe and Efficient Operation Guidelines for Safe and Efficient OperationGuidelines for Safe and Efficient Operation Guidelines for Safe and Efficient Operation
Guidelines for Safe and Efficient Operation
Your wireless telephone is a radio transmitter and receiver.  When the phone is turned on,
it receives and sends out radio frequency (RF) energy.  The phone operates in the fre-
quency range of 902–928 MHz.  Your hand-held wireless...

Installing the MDW 9030P Pocketphone
          
  2-3
Basic Safety Precautions for Installation and Use Basic Safety Precautions for Installation and UseBasic Safety Precautions for Installation and Use Basic Safety Precautions for Installation and Use
Basic Safety Precautions for Installation and Use
Always follow these basic safety precautions when installing or using this product to
reduce risk of injury from fire or electric shock.
!WARNING:
Installation of this equipment for In-Range Out of Building...

2-4
              
   Installing the MDW 9030P Pocketphone
– Installing a new radio module
– Connecting or disconnecting telephone line cords
– Adding a carrier
nUse only the type of battery pack shipped with this product.
!WARNING:
The rechargeable battery pack may contain elements that are harmful to the
environment (for example, nickel).  Do not burn or puncture the battery pack. Like
other batteries of this type, if it is burned or punctured, it could release toxic
material which could cause injury....

Installing the MDW 9030P Pocketphone
          
  2-5
nUse only the power supply (Comcode 847224227) shipped with the carrier.
nUse only the correct power source. If you are not sure of the power supply to your
location, consult your local power company.
nThis product uses a 3-prong plug. Such plugs are designed for your safety. Do not
attempt to defeat this purpose.  If your wall outlet will not accept the plug, the outlet
should be replaced by an electrician.
!WARNING: Risk of Electric Shock
Failure to...

2-6
              
   Installing the MDW 9030P Pocketphone
Radio Modules and Carriers
This section explains how to install radio modules and carriers. You should proceed through
this section in the following order:
1. “Key Components”
2. “Positioning a Single Radio Module or Carrier(s)”
3. Wireless Test Mode
4. Choose one of the following paths, depending upon which components you are install-
ing:
nIf you are installing a single radio module, go to “Installing a Single Radio Module.”
nIf you are...

Installing the MDW 9030P Pocketphone
          
  2-7
Key Components Key ComponentsKey Components Key Components
Key Components
Each radio module communicates with a corresponding handset.  The matching sets are
identified by a serial number located on the bottom of the radio module and in the battery
compartment of the handset.
Power Cord
Connector
Card Edge
(Cover not
shown)
Snap Lock
Antenna
Mounting
Hook
LEDs
POWERRADIOPASS
Radio 
Module
POWER
RADIO
PASS
Telephone
Line Cord
ConnectorSerial Number 

2-8
              
   Installing the MDW 9030P Pocketphone
A carrier is required when installing two or more MDW 9030P Pocketphones.
Using the expansion cable provided with each carrier, you can link up to three carriers.
12346
4TRANSTALK
2 1O   N2 1O   N
5
CAUTIONUSE ONLY
AT&T CABLE
P⁄ N 847667896IN
OUT
OUT OF SYNC
Rear 
Exit Slots Wall Mount
Hole Slot
Numbers Card Edge
Connectors Out of Sync LED Out Jack
In Jack
Cable
Manager Slot Wall Mount
Hole Slot
Numbers Card Edge
Connectors Power Cord
Connector...