Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
927 System Parameters Call Coverage / Call Forwarding 
17
However, you can enter y in this field to have QSIG VALU call coverage take 
precedence. In this case, if the Coverage After Forwarding option on the Station 
screen is enabled for a user, then QSIG Diversion with Rerouting is not be 
attempted.
Station Hunt Before Coverage
This field allows you to choose whether a call to a busy station performs...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
928 System Parameters Call Coverage / Call Forwarding 
17
Field descriptions for page 2
Screen 188. System-Parameters Coverage-Forwarding 
Coverage Of Calls Redirected Off-Net Enabled
This field allows you to enable/disable the Coverage of Calls Redirected Off-Net 
(CCRON) feature. This field provides a quick means of disabling this feature if 
the demand on the call classifier port resources degrades other...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
929 System Parameters Call Coverage / Call Forwarding 
17
Ignore Network Answer Supervision
This field appears only if the Coverage of Calls Redirected Off-Net Enabled field 
on this screen is 
y.
CCRON may use a call classifier port to determine whether an off-net coverage or 
forwarded call has been answered, discarding other information that may indicate 
an answered state. However, some customers pay...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
930 System Parameters Country-Options 
17
over ISDN trunk signalling. This field provides a customer the means of directing 
the switch to dispense with the call classifier on interworked calls and rely on the 
ISDN trunk signalling messages.
System Parameters Country-Options
This screen implements parameters associated with certain international 
(including North American) call characteristics. You cannot...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
931 System Parameters Country-Options 
17
Field descriptions for page 1
Screen 189. System Parameters Country-Options 
Companding Mode
Identifies the companding algorithm to be used by system hardware.
16Argentina
17Greece
18China
19Hong Kong
20Thailand
21Macedonia
22Poland
23Brazil
24Nordic
25South Africa
Valid entries Usage
A-law
Generally used outside the US
Mu-law  Generally used in the US
Code Country...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
932 System Parameters Country-Options 
17
Base Tone Generation Set
The country code identifies the base tone generation set to be used. This field is 
meaningful only if the system tone detector is a TN780, vintage 4 or a TN2182.
A TN780 vintage 5 or greater or a TN2182 is required if Belgian Tones (Country 
code 8) are specified.
440Hz PBX-dial Tone
Specifies whether the switch (primary) dial tone will be...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
933 System Parameters Country-Options 
17
Set Layer 1 timer T1 to 30 seconds
Analog Line Transmission
The country code identifies the transmission and signaling parameters.
Enhanced 64xx/84xx Display Character Set 
Howler After Busy
Plays howler tone when users leave their analog phone off-hook too long.
Disconnect on No Answer by Call Type
Drops outgoing trunk calls (except DCS and AAR) that users leave...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
934 System Parameters Country-Options 
17
Tone Detection Mode 
The country code specifies the type of tone detection used on a TN420B (or later) 
tone-detection circuit pack.
Dial Tone Validation Timer
Displays number of milliseconds that the dial tone validation routine will use to 
sample transmissions. This field appears only when Tone Detection Mode is equal 
to 
4 or 5. (Valid with TN420C or later Tone...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
935 System Parameters Country-Options 
17
Field descriptions for page 2
Screen 190. System Parameters Country-Options 
Digital Loss Plan
Provides the default values for digital loss plan and n-party conference loss.
Customize
Appears when the Digital Loss Plan Modification field is enabled on the 
System-Parameters Customer-Options screen.
FROM / TO
Identifies the variable digital loss values.
Valid entries...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
936 System Parameters Country-Options 
17
Field descriptions for page 3
Screen 191. System Parameters Country-Options 
Digital Tone Plan
Provides the default values for tone loss for the selected country.
Customize
Appears when, on the System-Parameters Customer-Options screen, the Digital 
Loss Plan Modification field is 
y. Valid entries Usage
1 
- 25Refer to the Country code table at the beginning of...