Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
977 Toll Analysis 
17
Toll Analysis  
NOTE:
The Toll List field on this screen does not interact with or relate to the ARS Toll Table.
This screen associates dialed strings to the system’s Restricted Call List (RCL), 
Unrestricted Call List (UCL), and Toll List. You can force users to dial an account 
code if you associate dialed strings with CDR Forced Entry of Account Codes. 
To maximize System security,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
978 Toll Analysis 
17
Dialed String
Min
Max
RCL
Enter 
x to assign the Dialed String to the Restricted Call List (RCL). 
Toll List 
Valid entries Usage
digits 0 to 9
(up to 18 characters)Enter the dialed string you want the switch to 
analyze. 
*, x, Xwildcard characters
Valid entries Usage
1
 to Max Enter the minimum number of user-dialed digits the 
system collects to match to this dialed string.
Valid...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
979 Toll Analysis 
17
CDR FEAC
Unrestricted Call List21 10 10 x
30 10 10 x
31 10 10 x
40 10 10 x
41 10 10 x
50 10 10 x
51 10 10 x
60 10 10 x
61 10 10 x
70 10 10 x
71 10 10 x
80 10 10 x
81 10 10 x
90 10 10 x
91 10 10 x
Valid entries Usage
x
Enter x to require an account code from a call whose facility 
COR requires a Forced Entry of Account Code.
Valid entries Usage
x
Enter x to assign the dialed string to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
980 Trunk Group 
17
Trunk Group 
Use the Trunk Group screen to set basic characteristics for every type of trunk 
group and to assign ports to the group. This section lists and describes all the 
fields you might see on the screen. Many fields are dependent on the settings of 
other fields and only appear when certain values are entered in other fields on the 
screen. For example, the entry in the Group...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
981 Trunk Group 
17
Group Type
Enter the type of trunk group.
Valid entries Usage
Access  Use access trunks to connect satellite switches to the main 
switch in Electronic Tandem Networks (ETN). Access trunks 
do not carry traveling class marks (TCM) and thus allow 
satellite callers unrestricted access to out-dial trunks on the 
main switch. Allows Inband ANI.
APLT Advanced Private Line Termination (APLT)...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
982 Trunk Group 
17
ISDN Use ISDN trunks when you need digital trunks that can 
integrate voice, data, and video signals and provide the 
bandwidth needed for applications such as high-speed data 
transfer and video conferencing. ISDN trunks can also 
efficiently combine multiple services on one trunk group.
You cannot enter isdn unless the ISDN-PRI field, the 
ISDN-BRI Trunks field, or both have been...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
983 Trunk Group 
17
CDR Reports
NOTE:
For ISDN trunk groups, the Charge Advice field affects CDR information. 
For CO, DIOD, FX, and WATS trunk groups, the Analog PPM field affects 
CDR information.
Group Name
 
Valid entries Usage
y
All outgoing calls on this trunk group will generate call detail 
records. If the Record Outgoing Calls Only field on the CDR 
System Parameters screen is n, then incoming...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
984 Trunk Group 
17
COR
Tip:
Remember that facility restriction levels (FRL) are assigned to classes of 
restriction. Even if 2 trunk groups have classes of restriction that allow a 
connection, different facility restriction levels may prevent operations such 
as off-net call forwarding or outgoing calls by remote access users.
TN
Tip:
Double-check your entry. If you accidentally enter an unassigned tenant...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
985 Trunk Group 
17
Protocol Type
This field specifies the type of line signaling protocol used for DID and DIOD 
trunk groups. This field appears when the Country field is 15 and is used only by 
trunk group members administered on a TN2199 or TN464D vintage 3 or later 
circuit pack.
Direction
This field appears for all trunk groups except DID and CPE.
Outgoing Display
This field allows display phones to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
986 Trunk Group 
17
Trunk Signaling Type
This field controls the signaling used by members in private network trunk 
groups, mainly in Italy, Brazil, and Hungary. This field appears if the Group Type 
is access, aplt, diod, rlt, tandem, or tie. Entries in this field affect which timers 
appear on the Administrable Timers page.
Valid entries Usage
cont
 
(continuous)E&M trunks in Italy, Brazil, and Hungary...