Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1017 Trunk Group 
17
Shuttle
This field appears when the Country field is 
15 and the Outgoing Dial Type field 
is
 rotary. It can be administered on TN464D (or later release) or TN2199 circuit 
packs.
Charge Conversion
DEFINITY ECS multiplies the number of charge units by the value of this field 
and displays it as a currency amount. If there is no value in this field, DEFINITY 
ECS displays the number of...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1018 Trunk Group 
17
Currency Symbol 
This field appears for CO, DIOD, FX, and WATS trunk groups when the Direction 
field is 
outgoing or two-way. For ISDN trunk groups, it appears when the Charge 
Advice field is not 
none.
Request Category
This field appears when the Country field is 
15 and the Shuttle field is y.
Start Position
The value administered in this field must be coordinated with your central...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1019 Trunk Group 
17
Receive Analog Incoming Call ID
Your switch stores and displays 15 characters of name and number information 
associated with an incoming call on analog trunks (ICLID, or incoming call line 
identification information). This field appears for CO, DID, and DIOD trunk 
groups when the Analog Trunk Incoming Call ID field on the System-Parameters 
Customer-Options screen is 
y and the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1020 Trunk Group 
17
Per Call CPN Unblocking Code 
For access, APLT, CO, DIOD, FX, tandem, tie, and WATS trunk groups only.
Time (sec) to Drop Call on No Answer
This field appears if the Group Type field is 
co or diod and the Outgoing Dial 
Type field is 
mf, or if the Group Type field is co, diod, fx, wats, and the Country 
field is 
15.
MF Tariff Free
This field appears for Access, APLT, DID, DIOD,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1021 Trunk Group 
17
Field descriptions for page 3
The figure below shows a common configuration for page 3 of the Trunk Group 
screen when the Group Type field is 
co. This screen is only an example, and the 
fields shown below may change or disappear according to specific field settings.
Screen 212. Administrable Timers for Trunk Group
!CAUTION:
Customers: Do not change fields on this page without...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1022 Trunk Group 
17
Incoming Disconnect (msec)
The field appears only for an incoming or two-way trunk group when the Trunk 
Signaling Type field is either blank or 
cont.
Outgoing Disconnect (msec)
Cama Outgoing Dial Guard (msec)
This field appears when Group Type is 
cama (the trunk group type used for 
emergency 911 service).
Incoming Dial Guard (msec
)
NOTE:
This timer is never sent to TN429 ports....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1023 Trunk Group 
17
Outgoing Dial Guard (msec)
Incoming Glare Guard (msec)
This field only appears when the trunk group Direction field is 
two-way.
Outgoing Glare Guard (msec)
This field only appears for 
outgoing and two-way trunk groups.
Outgoing Rotary Dial Interdigit (msec)
This field only appears when: (1) the trunk group Group Type field is 
access, 
aplt, co, diod, dmi-bos, fx, rlt, tandem, or wats...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1024 Trunk Group 
17
Ringing Monitor (msec)
This timer is sent to TN464C (or later), TN767, TN438 (all), TN447, TN465 (all), 
TN2138, TN2147, TN2184, and TN2199 CO circuit packs.
Cama Wink Start Time (msec)
Incoming Partial Dial (sec)
This timer appears only if the Incoming Dial Type field is 
rotary.
NOTE:
This timer is never sent to TN429 ports.
Incoming Seizure (msec)
This field appears when the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1025 Trunk Group 
17
Outgoing Rotary Dial Interdigit (msec) 
This field only appears when the Outgoing Dial Type field is 
rotary.
Outgoing End of Dial (sec)
This field controls firmware answer supervision timers on circuit packs that have 
them. It appears when the Direction field is 
outgoing or two-way and the Receive 
Answer Supervision field is 
n. If the Receive Answer Supervision field is y, this...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
1026 Trunk Group 
17
Outgoing Seizure Response (sec)
This timer is sent to the TN438B, TN439, TN447, TN458, TN464B (or later), 
TN465B (or later), TN767, TN2140, TN2147, TN2184, TN2199, and TN2242 
circuit packs.
Programmed Dial Pause (msec)
This timer is administrable for all outgoing and two-way trunk groups. This timer 
works with the TN464B (or later), TN767, TN458, TN2140, and TN2242 tie 
circuit...