Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
957 System Parameters Customer-Options 
17
Basic Supplementary Services
To use this enhancement, either the ISDN-PRI or ISDN-BRI Trunks fields must 
be 
y. Provides the following QSIG Supplementary Services: 
nName ID
nTransit Capabilities; that is, the ability to tandem QSIG information 
elements
nSupport of Notification Information Elements for interworking between 
QSIG and non-QSIG tandemed connections...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
958 System Parameters Customer-Options 
17
Transfer Into Lucent QSIG Voice Mail
Can be enabled only if the Basic Supplementary Services field is 
y and either the 
ISDN-PRI Trunk or ISDN-BRI Trunk field is 
y. Allows transfer directly into the 
voicemail box on the voicemail system when a QSIG link connects DEFINITY 
ECS and the voice mail.
Value Added Lucent 
Provides additional QSIG functionality,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
959 System Parameters Customer-Options 
17
Event Notification
Allows the associated adjunct to request incoming call notification and enables 
the switch to send event reports about such calls.
Request Feature
Allows the associated adjunct to request features such as change work modes, 
login, logout, sac, and fwd.
Set Value
Allows the adjunct to request status changes for Message Waiting lamps (that is,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
960 System Parameters OCM Call Classification 
17
Selective Listening
Consists of two capabilities, Third Party Listen Disconnect and Third Party Listen 
Reconnect. Listen Disconnect allows the adjunct to disconnect selected listening 
paths on an active call. Listen Reconnect allows the adjunct to reconnect 
disconnected listening paths.
Switch Classified Outbound Calls
When you enable the CallVisor ASAI...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
961 System Parameters OCM Call Classification 
17
Global Classifier Adjustment (dB)
Enter a number to specify the dB loss adjustment.
USA Default Algorithm
USA SIT Algorithm
Field descriptions for page 2
Screen 199. System Parameters OCM Call Classification screenValid entries Usage
0
 to 15 0 is the least and 15 the most adjustment.
Valid entries Usage
y/n
To use the default United States tone detection,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
962 System Parameters OCM Call Classification 
17
Tone Name
Instance
Enter the instance number of the tone. If the system identifies a tone that matches 
the characteristics defined on more than one page of this screen the system applies 
the tone definition from the earlier page.
Tone Continuous
Cadence Step
A display-only field identifying the number of each tone cadence step and 
indicating whether the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
963 Telecommuting Access 
17
Duration Maximum
Specifies the upper limit in milliseconds of the tone duration.
NOTE:
On the Feature-Related System Parameters screen, set the Off-Premises 
Tone Detect Timeout Interval field to its maximum value.
Telecommuting Access 
This screen allows the System Administrator to administer the extension which 
allows remote users to use the feature.
Field descriptions for...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
964 Tenant 
17
Te n a n t  
This screen defines tenants to the system. If your switch uses tenant partitioning, 
you can 
See ‘‘
Tenant Partitioning’’ on page 1548 for more information. 
Field descriptions for page 1
Screen 201. Tenant 
Tenant
This is a display only field. It contains the tenant number that you entered on the 
command line.
Tenant Description
Valid entries Usage
40 alpha-numeric characters...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
965 Tenant 
17
Attendant Group
This required information relates a tenant to an attendant group.
NOTE:
The default for the system is that all attendant groups exist. However, the 
attendant group will be empty if no consoles are assigned to it.
Ext Alert Port (TAAS)
Ext Alert (TAAS) Extension
This field appears only if you entered an 
X in Ext Alert Port (TAAS). 
Night Destination
Music Source
Valid entries...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
966 Tenant 
17
Field descriptions for page 2
Screen 202. Tenant 
Tenant
This is a display only field. It contains the tenant number that you entered on the 
command line.
Calling permissions
The system default allows each tenant to call only itself and Tenant 1. If you want 
to change that, you can do that on this screen.
Valid entries Usage
y/n
Enter y to establish calling permission between the tenant...