Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
937 System Parameters Country-Options 
17
End-to-End total loss (dB) in a n-party 
conference
Provides total loss for a conference call with the designated number of parties.
FROM / TO
Identifies the variable digital tone values.
Field descriptions for pages 4–7
Screen 192. System Parameters Country-OptionsValid entries Usage
0 
- 99The higher the number listed for a call with a fixed display 
number of...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
938 System Parameters Country-Options 
17
Tone Name
Each entry uses one of the keywords below to indicate which of the individually 
administrable tones this screen modifies. This field (with its associated Tone 
(Frequency/Level), Duration, and Step fields) is meaningful only if the system 
tone detector is a TN780, vintage 4 or greater, or a TN2182.
Cadence Step
Valid entries Usage
blank   If this field...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
939 System Parameters Country-Options 
17
Tone (Frequency/Level)
Valid entries Usage
silence
An entry of silence means no tone. A final step of silence 
with an infinite duration will be added internally to any tone 
sequence that does not end in a 
goto.
gotoAn entry of goto means to repeat all or part of the sequence, 
beginning at the specified cadence step.
350/-17.25
350+425/-4.0
350+440/-13.75...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
940 System Parameters Customer-Options 
17
Duration (msec)
There is one dynamic Duration field associated with each of the 15 Tone 
(Frequency/Level) fields on each screen page. Initially, when Tone is blank, this 
field does not appear. However, when a non-blank value other than 
goto is 
entered in a Tone field, the associated Duration field appears, and must be used to 
specify the duration (in...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
941 System Parameters Customer-Options 
17
G3 Version
Identifies the version of DEFINITY ECS being used. 
Maximum Ports
Number of ports active, per contract.
Location
Indicates the location of this switch. 1 indicates Canada or the United States. 2 
indicates any other location, and allows the use of International Consolidation 
circuit packs and telephones.
Maximum XMOBILE Stations
Specifies the maximum...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
942 System Parameters Customer-Options 
17
Maximum IP SoftPhones
Appears when the IP Stations field is 
y. Specifies the maximum number of IP 
SoftPhone stations that may be administered.
Field descriptions for page 2
Screen 194. System Parameters Customer-Options 
Abbreviated Dialing Enhanced List
Provides the capability to store and retrieve dialing lists that simplify or eliminate 
dialing. You dial an...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
943 System Parameters Customer-Options 
17
A/D Grp/Sys List Dialing Start at 01
Allows you to number Abbreviated Dialing group or system lists starting with 01, 
rather than simply 1. This allows DEFINITY ECS Abbreviated Dialing to operate 
like it does with the DEFINITY G2 system.
Analog Trunk Incoming Call ID
This field allows collection and display the name and number of an incoming call 
information on...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
944 System Parameters Customer-Options 
17
Asynch. Transfer Mode (ATM) PNC
With this configuration, the processor port network (PPN) is to be connected to 
expansion port networks (EPNs) via an ATM switch.
Asynch. Transfer Mode (ATM) Trunking
With this configuration, multiple ISDN-PRI T1 or E1 trunks can be emulated on 
one ATM pipe. Can only be enabled if the ISDN-PRI field is set to 
y. Enables 
circuit...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
945 System Parameters Customer-Options 
17
CAS Main
Provides multi-location switch customers served by separate switching vehicles to 
concentrate attendant positions at a single main DEFINITY ECS location. The 
main DEFINITY ECS is served by an attendant queue that collects calls from all 
locations (main and branch). Each branch location switches all of its incoming 
calls to the centralized attendant...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
946 System Parameters Customer-Options 
17
DEFINITY Network Admin
Indicates the switch is accessible by DEFINITY Network Administration.
Digital Loss Plan Modification
Allows you to customize the digital loss and digital tone plans.
DS1 MSP
Provides the ability to change fields on DS1 circuit pack screen without removing 
the related translations of all trunks from the trunk group.
Emergency Access to...