Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
897 Station 
17
Adjunct Supervision
Adjunct Supervision appears when the Type field is 
500, 2500, k2500, 8110, ops, 
ds1fd, ds1sa, VRU, VRUFD, or VRUSA.
Assigned Member — Ext
The system automatically assigns this extension. This is the extension of the user 
who has an associated Data Extension button and shares the module.
Assigned Member — Name
Display-only field that shows the name associated with the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
898 Station 
17
Audible Message Waiting
The Audible Message Waiting tone indicates that the user has a waiting message. 
This field appears only if Audible Message Waiting is set to 
y on the 
System-Parameters Customer-Options screen. 
Note that this field does not control the Message Waiting lamp.
Audix Name
Specifies which AUDIX is associated with the station.
Auto Answer
In EAS environments, the auto...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
899 Station 
17
Auto Select Any Idle Appearance
BCC
Appears when ISDN-PRI or ISDN-BRI Trunks is enabled on the 
System-Parameters Customer-Options screen. Display-only field set to 0 for 
stations (that is, indicates voice or voice-grade data). 
Refer to ‘‘
Generalized route selection’’ on page 1351 for a detailed description of 
Bearer Capability Classes (BCC) and their ability to provide specialized...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
900 Station 
17
Cable
You can use this field to identify the cable that connects the phone jack to the 
system. You also can enter this information in the Blank column on the Port 
Assignment Record.
Caller ID Message Waiting Indication
Appears when the Type field is CallrID. For CallrID type phones or analog phones 
with Caller ID adjuncts only.
NOTE:
The Caller ID Message Waiting Indication administration...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
901 Station 
17
Cord Length
Enter a number to specify the length (in feet) of the cord attached to the receiver.
COS
Enter the desired Class of Service (COS) number to select allowed features.
Country Protocol
Enter the protocol that corresponds to your supported initialization and codesets. 
The Country Protocol must match any previously-administered endpoint on the 
same port.
Coverage After Forwarding...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
902 Station 
17
Coverage Module
Coverage Path 1 or Coverage Path 2
Enter a coverage-path number or time-of-day table number from a 
previously-administered Call Coverage Path screen or Time of Day Coverage 
Table screen.
NOTE:
If Modified Misoperation is active (Misoperation Alerting is y on the 
Feature-Related System Parameters screen), you must assign a Coverage 
Path to all stations on the switch.
CRV...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
903 Station 
17
Default Dialing Abbreviated Dialing Dial Code
Appears only when the Special Dialing Option is set to default. Enter a list 
number associated with the abbreviated dialing list. 
When the user goes off-hook for a data call and presses 
RETURN following the 
DIAL prompt, the system dials the AD number. The data call originator also can 
perform data-terminal dialing by specifying a dial string...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
904 Station 
17
Display Language
Specifies the display language.
Distinctive Audible Alert
Endpt ID
Appears only if Endpt Init is 
y. Enter a unique 2-digit number (00–62) for this 
endpoint. Each Endpt ID field must have a unique value for each endpoint on the 
same port.
This field provides for multipoint configuration conformance to the Bellcore 
Terminal Initialization procedures. In these procedures, a...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
905 Station 
17
Endpt Init 
Endpoint initialization is a procedure, required for multipoint operation, by which 
User Service Order Profile (USOP) is associated with an endpoint on the 
ISDN-BRI. This association is made via the SPID, administered into the system, 
and entered into the ISDN-BRI terminal. For an ISDN-BRI terminal to be 
operational in a multipoint configuration, both the administered SPID...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
906 Station 
17
Feature Module
Enter 
y to indicate the station is connected to a feature module. Entering y 
displays an additional page to allow you to assign feature buttons to the module.
Fixed TEI
This field appears only for ISDN-BRI data modules and ASAI links. It indicates 
that the endpoint has a fixed Terminal Endpoint Identifier (TEI).
The TEI identifies a unique access point within a service. You...