Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
867 PRI Endpoint 
17
Width
Enter the number of adjacent DS0 ports beginning with the specified Starting 
Port, that make up the PRI Endpoint.This field cannot be blank.
Originating Auto Restoration
Signaling Group
COR
COS
A through EThird character is the carrier
01 through 20Fourth and fifth characters are the slot number
01 through 31 (DS1 Interface 
ports)Sixth and seventh characters are the circuit...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
868 PRI Endpoint 
17
TN
Simultaneous Calls
Maintenance Tests
H0
H11
Valid entries Usage
1
–20 Enter the Tenant Partition number.
Valid entries Usage
y/n
Enter y to specify that multiple simultaneous calls can be 
placed to/from the PRI Endpoint.
Valid entries Usage
y/n
Enter y to run hourly maintenance tests on this PRI Endpoint.
Valid entries Usage
y/n
Enter y to specify the ISDN information transfer rate...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
869 PRI Endpoint 
17
H12
NXDS0
Contiguous
Specifies whether to hunt contiguous NXDS0 channels. This field only appears if 
y is entered in NXDS0. The hunt algorithm to satisfy an NXDS0 call is as follows:
Valid entries Usage
y/n
Enter y to specify the ISDN information transfer rate for 1920 
Kbps data, which includes 30 B-channels. When a PE is 
administered to support H12, the hunt algorithm to satisfy a...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
870 Remote Access 
17
Remote Access
The Remote Access screen is used to implement the Remote Access feature. 
Remote Access permits a caller located outside the system to access the system 
through the public or private network and then use the features and services of the 
system.
Remote Access users can dial into the system using central office (CO), Foreign 
Exchange (FX), Wide Area Telecommunications...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
871 Remote Access 
17
nUse a voice recording, warble tone, or no tone and avoid use of a dial tone 
as a prompt when the remote access unit answers.
nAssign the lowest possible FRL to only allow internal switch calls.
As an additional step to ensure System security, you can permanently disable the 
Remote Access feature if you do not intend to use it now or in the future. If you do 
decide to permanently...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
872 Remote Access 
17
Screen 176. Remote Access Status 
Remote Access Extension
The remote access extension is used as if it was a DID extension. Only one DID 
extension can be assigned as the remote access extension. Calls to that number are 
treated the same as calls on the remote access trunk.
When a trunk group is dedicated to Remote Access, the remote access extension 
number is administered on the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
873 Remote Access 
17
Authorization Code Required
When you use an authorization code in conjunction with a barrier codes it 
increases the security of the Remote Access feature.
Remote Access Dial Tone
Set this field to 
n for maximum security. This field appears when the 
Authorization Code Required field is set to y.
Barrier Code
You must assign a barrier code that conforms to the number entered in the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
874 Remote Access 
17
TN
COS
Assign the most restrictive class of service (COS), that provides only the level of 
service required to provide the maximum security.
Expiration Date
Assign an expiration date based on the expected length of time the barrier code 
will be needed. If it is expected the barrier code is to be used for a 2-week period, 
assign a date two weeks from the current date. If the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
875 Remote Call Coverage Table 
17
Permanently Disable
Reactivation of remote access to the interface requires Lucent Services 
intervention.
Disable Following a Security Violation
This field appears on the screen when the SVN Authorization Code Violation 
Notification Enabled field on the Security-Related System Parameters screen is 
set to y. 
Related Topics
Refer to ‘‘
Setting up remote access’’ on page...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
876 RHNPA Table 
17
Field descriptions for page 1
Screen 177. Remote Call Coverage Table 
RHNPA Table
The RHNPA Table defines route patterns for specific 3-digit codes, usually direct 
distance dialing (DDD) prefix numbers. 
Screen 178. RHNPA Table
change coverage remote
REMOTE CALL COVERAGE TABLE
01: ________________      16: ________________      31: ________________        
02: ________________      17:...