Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
837 Multifrequency-Signaling-Related System Parameters 
17
ANI for PBX
This field appears only when Outgoing Call Type is 
group-ii-mfc or mfe.
MFE Type
This field only appears when Incoming Call Type is 
mfe and the Outgoing Call 
Type is 
mfe or none.
Maintenance Call Type
Next ANI Digit
This field appears when Outgoing Call Type is 
group-ii-mfc.
Valid entries Usage
2
 to 15 Enter the PBX identification...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
838 Multifrequency-Signaling-Related System Parameters 
17
Test Call Extension
Interdigit Timer (sec)
Specify the maximum number of seconds the switch will wait for the first forward 
signal (digit) to arrive, and for subsequent digits to arrive. Intercept returns to the 
calling party if this timer expires.
Maximum Resent Requests
Received Signal Gain (-Loss) (dB)
Transmitted Signal Gain (-Loss) (dB)
Valid...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
839 Multifrequency-Signaling-Related System Parameters 
17
Outgoing Forward Signal Present Timer (sec)
This field appears only when the value of Outgoing Call Type is 
group-ii-mfc.
Outgoing Forward Signal Absent Timer (sec)
This field appears only when the content of Outgoing Call Type is 
group-ii-mfc.
Multifrequency Signaling Incoming Intercept 
Treatment
Overlap Sending on Link-to-Link Tandem Calls
A...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
840 Multifrequency-Signaling-Related System Parameters 
17
Private Group II Permissions and Public 
Interworking
Convert First Digit End-of-ANI To
Collect All Digits Before Seizure
This field appears only when Outgoing Call Type is 
group-ii-mfc or mfe.
Request Incoming ANI (non-AAR/ARS)
This field only applies if the incoming call via the R2-MFC trunk is terminating to 
a local station on this PBX.
Valid...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
841 Multifrequency-Signaling-Related System Parameters 
17
Forward Cycle Timer (sec)
This field appears only if Incoming Call Type is 
mfe and Outgoing Call Type is 
mfe or none.
Backward Cycle Timer (sec)
This field appears only if Incoming Call Type is 
mfe and Outgoing Call Type is 
mfe or none.
Incomplete Dial Timer (sec)
This field appears only if Incoming Call Type is 
mfe and Outgoing Call Type is...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
842 Multifrequency-Signaling-Related System Parameters 
17
Group II Called Party Category
Enter the type of group II signals that should be used on the outgoing R2-MFC 
call
Note: For India, the ANI can be requested without the call category information.
Use COR for Calling Party Category
Indicates the category to send with ANI if requested on an outgoing R2-MFC call.
Outgoing Shuttle Exchange Cycle Timer...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
843 Multifrequency-Signaling-Related System Parameters 
17
Field descriptions for page 2
The fields on Page 2 define call category and ANI information. For India, the ANI 
can be requested without the call category information.
Screen 165. Multifrequency-Signaling-Related Parameters screen
Request Call Category at Start of Call
Indicates that the Send-ANI backward signal requesting for the caller-category...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
844 Multifrequency-Signaling-Related System Parameters 
17
Number of Incoming ANI Digits
Number of Outgoing ANI Digits
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
Truncate Station Number in ANI 
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
ANI Source for Forwarded Calls
Valid entries Usage
0
 to 15Enter the number of ANI digits for incoming MFC calls.
Valid...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
845 Multifrequency-Signaling-Related System Parameters 
17
Address Digits Include End-of-Digits Signal
Indicates that an outgoing forward Group I end-of-digit signal is always sent after 
completion of address digits upon request from the Central Office for outgoing 
calls.
Call Category for Vector ii-digits
Allows you to use the call category digit as the ii-digits on call vector steps.
Request CPN at...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
846 Multifrequency-Signaling-Related System Parameters 
17
ANI Not Available
You must enter a value if the ANI for PBX field is blank
Field descriptions for page 3
The fields shown on Page 3 of the Multifrequency-Signaling-Related System 
Parameters screen define the meaning of MFC tones for calls originated at the 
CO. Refer to ‘‘
Definitions of Group I, II, A, and B signals’’ on page 851 for more...