Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
507 Attendant Console 
17
Name
Contains the name assigned to the above extension number.
Field descriptions for page 3-x
Screen 39. Attendant Console
FEATURE BUTTON ASSIGNMENTS
Enter the feature buttons from ‘‘
Attendant console feature buttons’’ on page 110 
that you want to assign to the attendant console. The fixed buttons that cannot be 
changed (that is, split and forced release) are shown on the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
508 Attendant Console 
17
alt-frlAlternate FRL. Alternate facility restriction level; allows the 
attendant to activate or deactivate the AFRL feature. When 
activated, this allows the originating device (lines or trunks) to 
use an alternate set of the facility restriction levels to originate a 
call (1 per console).
Attendant Control of Trunk Group Access
act-tr-grpActivate trunk group access; allows the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
509 Attendant Console 
17
dont-splitDon’t Split. This button allows the attendant to not split away a 
call when dialing (1 per console).
visVisually Impaired Attendant Service (vis) — This button 
activates visually impaired service for the attendant. When this 
service is activated, the attendant can listen to console status or 
messages by pressing buttons that have been translated as 
follows:
ncon-stat...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
510 Attendant Console 
17
hundrd-selHundreds group select; in addition to the fixed HGS buttons on 
Field descriptions for page 1, a user can administer hundreds 
group select feature buttons on this page. When a feature button 
is administered as “hundrd-sel,” a subfield appears that must 
then be administered in the same manner as the fixed HGS 
button fields (a 1 to 3 digit hundreds group plus prefix, if...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
511 Authorization Code — COR Mapping 
17
nIf 12 HGS buttons are assigned on Field descriptions for page 2, it is 
recommended that the night, pos-busy, and hold buttons be 
reassigned to locations 20, 21, and 3, respectively. The HGS buttons should 
then be assigned to the right-most three columns, as required.
Screen 40.  Attendant Console 
nDISPLAY MODULE BUTTON ASSIGNMENTS — Display-type buttons 
obtain...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
512 Authorization Code — COR Mapping 
17
Field descriptions for page 1
Screen 41. Authorization Code - COR Mapping screen
Number of Codes Administered
Displays the number of Authorization Codes already administered using the 
Authorization Codes screen. There is a maximum number of authorization codes 
that you can use. To find out what this number is for your system, type 
display 
capacity
, and page down...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
513 Bulletin Board 
17
Bulletin Board
Use the bulletin board to post and receive information. There are three pages of 
message space within the bulletin board. The first page has 19 lines, but you can 
only enter text on lines 11-19. The first 10 lines on page 1 are for high-priority 
messages from Lucent Technologies personnel and are noted with an asterisk (*). 
The second and third pages each have 20...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
514 Bulletin Board 
17
Lines 1 through 10
These lines are reserved for high priority messages and are noted with an asterisk 
(*) in the first column on the left. If you have an init or inads login you can enter 
high-priority information to trigger the high-priority message at login time.
Lines 11 through 19
These lines can be used by anyone with access.
Date
This display-only field contains the date the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
515 Call Vector 
17
Date
This display only field contains the date the information was entered or last 
changed.
Call Vector
This screen programs a series of commands that specify how to handle calls 
directed to a Vector Directory Number (VDN). Refer to the DEFINITY ECS Call 
Vectoring/EAS Guide for additional information.
Field descriptions for page 1
Screen 43. Call Vector 
Field descriptions for page 2...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
516 Call Vector 
17
Field descriptions for page 3
Screen 45. Call Vector
Number
A display-only field when the screen is accessed using a 
change or display 
administration command. 
Name
Represents the vector name. 
Multimedia
Indicates whether the vector should receive early answer treatment for multimedia 
calls. This only applies if the Multimedia Call Handling field is 
y.
Valid entries Usage
Up to 27...