Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
467 AAR and ARS Digit Analysis Table 
17
Dialed String
User-dialed numbers are matched to the dialed string entry that most closely 
matches the dialed number. For example, if a user dials 297-1234 and the AAR or 
ARS Digit Analysis Table has dialed string entries of 297-1 and 297-123, the 
match is on the 297-123 entry. 
An exact match is made on a user-dialed number and dialed string entries with...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
468 AAR and ARS Digit Analysis Table 
17
Call Type (for AAR only)
Enter the call type associated with each dialed string. Call types indicate 
numbering requirements on different trunk networks. ISDN Protocols are listed in 
the table below. 
ISDN Protocol
Call Type (for ARS only)
Valid entries Usage
aar
Regular AAR calls
intl  The Route Index contains public network ISDN trunks that 
require international...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
469 AAR and ARS Digit Analysis Table 
17
Node Number 
ANI Reqd
lpvtlocal private normal
natlnon-NANP normal
npvtnational private normal
nsvcnational service normal
opoperator attendant
pubupublic-network number (E.164)-unknown normal
svclnational(2) toll-auto
svctnational(2) normal
Valid entries Usage
1
 to 999Enter the number of the destination node in a private 
network if you are using node number...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
470 AAR and ARS Digit Conversion Table 
17
AAR and ARS Digit Conversion Table
Your system uses the AAR or ARS Digit Conversion Table to change a dialed 
number for more efficient routing. Digits may be inserted or deleted from the 
dialed number. For instance, you can tell the switch to delete a 1 and an area code 
on calls to one of your locations, and avoid long-distance charges by routing the 
call over...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
471 AAR and ARS Digit Conversion Table 
17
Location (for ARS only)
This is a display-only field. Values other than “all” appear only if the Multiple 
Locations field on the System Parameters Customer Options is y.
Percent Full
Displays the percentage (0 to 100) of the system’s memory resources that have 
been used by AAR/ARS. If the figure is close to 100%, you can free-up memory 
resources. 
Matching...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
472 AAR and ARS Digit Conversion Table 
17
Replacement String
Net
Enter the switch network used to analyze the converted number.
Conv
ANI Req
This field applies only if the Request Incoming ANI (non-AAR/ARS) field on the 
Multifrequency-Signaling-Related System Parameters screen is 
n. Valid entries Usage
0
 to 9 
(1 to 18 digits)Enter the digits that replace the deleted portion of the dialed 
number. Leave...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
473 Abbreviated Dialing List 
17
Abbreviated Dialing List
You use the Abbreviated Dialing List screens to establish system-wide or personal 
lists for speed dialing. 
Enhanced List
The Enhanced Abbreviated Dialing List can be accessed by users to place local, 
long-distance, and international calls; to activate/deactivate features; or to access 
remote computer equipment.
NOTE:
The Abbreviated Dialing...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
474 Abbreviated Dialing List 
17
Size (multiple of 5)
The number of dial code list entries you want in this list.
Privileged
Indicates whether users of this list can dial any number in the list, regardless of the 
COR of the station from which they dial.
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
475 Abbreviated Dialing List 
17
Field descriptions for page 1
Screen 27. Abbreviated Dialing Group List 
Group List
This is a display-only field when the screen is accessed using an administration 
command such as 
add or change.
Size (multiple of 5)
Enter the number of abbreviated dialing numbers you want to assign in multiples 
of 5, up to 100.
Program Ext
Enter the extension that you want to give...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
476 Abbreviated Dialing List 
17
Only DIAL CODEs 1 through 5 are displayed initially. If you enter a number 
greater than 5 in the Size field, the system increases the number of dial codes to 
the number you specified.
Vector Directory Number extension may also be assigned.
Personal List
This screen establishes a personal dialing list for phone/data module users. The 
personal list must first be assigned to...