Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
497 ARS Toll Table 
17
Rate
Enter the recording speed (in 1000 bits/second) for integrated announcements. A 
different recording speed may be used for each integrated announcement. When 
the type is analog, ds1, or aux-trunk, N/A appears in this field.
Port
A R S  To l l  Ta b l e
This screen assigns ARS Toll Tables used by Subnet Trunking. Use it to specify 
whether calls to CO codes listed on the table...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
498 Attendant Console 
17
ARS TOLL TABLE
OFFICE CODES
00: through 99:
These fields represent the last 2 digits of the codes within the 100-block of 
numbers. Designate each as a number toll or non-toll call.
Attendant Console
This screen assigns an Attendant Console to the system.
Field descriptions for page 1
Screen 37. Attendant Console Valid entries Usage
2
 through 9Identify the number of the ARS Toll...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
499 Attendant Console 
17
Attendant Console x
This is a display-only field when the screen is accessed using an administration 
command such as 
add or change.
Ty p e
Extension (Optional) 
Enter the extension for the individual attendant console. Individual attendant 
extensions allow attendants to use features that an attendant group cannot use. For 
example, extensions can be members of a DDC or UCD...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
500 Attendant Console 
17
Port
Enter seven characters.
Each attendant console requires a port on a digital line circuit pack. For reliability, 
the attendant consoles should not be assigned to ports on the same digital line 
circuit pack. For example, if three attendant consoles are to be provided, assign 
each console to a port on three different digital line circuit pack, if possible. 
However, if...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
501 Attendant Console 
17
TN
COS
COR
Auto Answer
Data Module
Valid entries Usage
1
 to 20Enter the Tenant Partition number.
Valid entries Usage
0
 through 15Enter the class of service (COS) for this attendant console.
Valid entries Usage
0
 through 95Enter the class of restriction that reflects the desired 
restriction.
Valid entries Usage
all
Entering all in this field indicates an incoming call to an idle...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
502 Attendant Console 
17
Disp Client Redir
This field is administrable only if the Hospitality feature has been enabled on the 
System-Parameters Customer-Options screen. This field affects the station’s 
display on calls originated from a station with Client Room Class of Service.
Display Language
Enter the language in which you want console messages displayed.
H.320 Conversion
Allows H.320 compliant...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
503 Attendant Console 
17
DIRECT TRUNK GROUP SELECT BUTTON 
ASSIGNMENTS (Trunk Access Codes)
Enter the trunk access codes (TACs) for local and remote switches. (There are 
fields for one local TAC and one remote TAC per button labeled Local and 
Remote.) The local TAC (1 to 4 digits) refers to a trunk group or Loudspeaker 
Paging zone on this switch. Remote TACs are only useful in a private network...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
504 Attendant Console 
17
Field descriptions for page 2
Screen 38. Attendant Console Data Module 
This page displays if the Data Module field on Page 1 is y. 
Data Extension
Enter the extension number assigned to the data module.
BCC
Only displays when the ISDN-PRI or ISDN-BRI Trunks field is enabled on the 
System-Parameters Customer-Options screen.
NOTE:
The BCC value is used to determine compatibility...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
505 Attendant Console 
17
Name
Enter the name of the user associated with the data module. The name is optional, 
it can be left blank.
COR
Enter the desired class of restriction (COR) number.
COS
Enter the desired (COS) number to designate allowed features. See ‘‘
Class of 
Service’’ on page 545 for additional information on the allowed features.
TN
Enter the Tenant Partitioning number.
Abbreviated...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
506 Attendant Console 
17
HOT LINE DESTINATION — Abbreviated Dialing 
Dial Code
Only displays when the Special Dialing Option field is 
hot-line. The associated 
AD number is dialed when the user goes off-hook on a Data Hot Line call.
Hot Line Service allows single-line telephone users, by simply lifting the handset, 
to automatically place a call to a preassigned destination (extension, telephone 
number,...