Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
477 Abbreviated Dialing List 
17
Personal List
Enter the extension of the phone that will use this list.
List Number
Size (multiple of 5)
Enter the number of abbreviated dialing numbers you want to assign in multiples 
of 5, up to 100.
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied up, and, since...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
478 Abbreviated Dialing List 
17
System List
This screen implements a system abbreviated dialing list. Only one system list can 
be assigned and is administered by the System Administrator. The list can be 
accessed by users to place local, long-distance, and international calls; to 
activate/deactivate features; or to access remote computer equipment.
Page 1 of 4 of the screen
Screen 29. Abbreviated...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
479 Abbreviated Dialing List 
17
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied up, and, since 
there are a limited number of receivers in the system, outgoing calling capability 
may be impaired.
Only DIAL CODEs 1 through 5 are displayed initially. If you enter a number 
greater than 5 in the Size...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
480 Abbreviated Dialing List 
17
Pages 1 through 4 of the screen
Screen 30. Abbreviated Dialing List — 7103A Button List
DIAL CODE
Enter the number you want to assign to each dial code (button). Any additions or 
changes apply to all 7103A fixed feature phones. While the system is waiting, a 
call progress tone receiver is tied up, and, since there are a limited number of 
receivers in the system, outgoing...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
481 Access Endpoint 
17
Access Endpoint
This screen administers Access Endpoints and Wideband Access endpoints.
NOTE:
You can administer Wideband Access Endpoints only if, on the 
System-Parameters Customer-Options screen, the Wideband Switching field 
is 
y.
An Access Endpoint is a nonsignaling trunk that neither responds to signaling nor 
generates signaling. Access Endpoints eliminate the need to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
482 Access Endpoint 
17
Extension
A display-only field showing the extension number as specified in the command 
line, or shows the next available extension number if 
next was entered on the 
command line. This is the extension number assigned to the nonsignaling trunk 
and used to access the trunk endpoint.
(Starting) Port
Enter seven characters.
For example, 01A0612 is in cabinet 01, carrier A, slot 06,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
483 Access Endpoint 
17
Communication Type
Name
Enter an name for the endpoint.
Width
Only appears if the Communication Type field is 
wideband. This field cannot be 
blank.
COR
The COR is administered so that only an administered connection (AC) endpoint 
can be connected to another AC endpoint.
COS
The COS is administered (refer to ‘‘
Class of Service’’ on page 545) so that the use 
of the Call Forwarding...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
484 Access Endpoint 
17
ITC (Information Transfer Capability)
This field is used to determine the type of transmission facilities to be used for 
ISDN calls originating from this endpoint. Displays when the Communication 
Type field is 
56k-data, 64k-data, or Wideband.
When adding an access endpoint with the ITC administered as unrestricted, its 
associated port has to be a channel of a DS1 circuit pack...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
485 Administered Connection 
17
Administered Connection
This screen assigns an end-to-end Administered Connection (AC) between two 
access endpoints or data endpoints. The AC is established automatically by the 
system whenever the system restarts or the AC is due to be active. Refer to 
‘‘
Administered Connections’’ on page 1144 and ‘‘Access Endpoint’’ on page 481 
for additional information.
Field...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
486 Administered Connection 
17
Originator
Enter the assigned access endpoint/data module extension. 
Data Line circuit pack
nAsynchronous EIA 232C compatible equipment
Digital Line circuit pack connections, including:
nMPDM (700D), MTDM (700B, 700C, 700E), 7400D data module
n7400A, 7400B, 7400C HSL, 8400B data module
n7401D phone with 7400B or 8400B data module
n7403D/7405D/7407D/7410D/7434D phone with...