Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual
Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 131
Configuration 3:R8si R8r Gateway R8si 111 Administration for Network Connectivity 555-233-504— Issue 1 — April 2000 CID: 77730 3 C-LAN Administration Interface Chan For TCP/IP, interface channel numbers are in the range 5000 – 64500. The recommended values are: 5001 for CMS, 5002 for Intuity AUDIX, and 5003 for DCS connections that are not gateways. These three values should be reused for multiple instances of these applications; for example, if there are two Intuity AUDIX’s, use 5002 for both;...
Page 132
Configuration 3:R8si R8r Gateway R8si 3 C-LAN Administration Administration for Network Connectivity CID: 77730 555-233-504 — Issue 1 — April 2000 112 > Submit the screen End Destination Port A value of 0 allows any available interface channel on the destination node to be used for this connection. The Interface Channel number on the Switch-3 Processor Channel screen must also be set to 0. Session - Local For each connection, the Local Session number on this switch must equal the Remote Session...
Page 133
Configuration 3:R8si R8r Gateway R8si 113 Administration for Network Connectivity 555-233-504— Issue 1 — April 2000 CID: 77730 3 C-LAN Administration Switch 2 Task — Assign Link via procr-intf Data Module to Switch 1 This task administers a processor-interface data module for the x.25 connection to node 1. The data module associates a link number with a physical channel number and extension number for the PI port used for this connection. Begin Steps > Open Data Module form — enter a da n > Enter...
Page 134
Configuration 3:R8si R8r Gateway R8si 3 C-LAN Administration Administration for Network Connectivity CID: 77730 555-233-504 — Issue 1 — April 2000 114 Enable Link?: Set to y after the processor channels have been assigned. Maintenance Extension: Specified on dial plan. Destination Number: TAC (812) + extension (2102) of the data module on the far end that will establish the connection. Establish Connection?n means that the switch at the remote end of this connection (Switch 1 in this case) will be...
Page 135
Configuration 3:R8si R8r Gateway R8si 115 Administration for Network Connectivity 555-233-504— Issue 1 — April 2000 CID: 77730 3 C-LAN Administration Switch 2 Task — Assign Processor Channels This task associates data links (hardware) with processor channels (software) on Switch 2. Begin Steps > Open Processor Channel Assignment form — enter ch com p Note:The Processor Channel number, the Interface Channel number, and the Local and Remote Session numbers do not need to be the same number but they...
Page 136
Configuration 3:R8si R8r Gateway R8si 3 C-LAN Administration Administration for Network Connectivity CID: 77730 555-233-504 — Issue 1 — April 2000 116 > Submit the screen End Session - Local The Local and Remote Session numbers can be any value between 1 and 256 (si model) or 384 (r model), but they must be consistent between endpoints. For each connection, the Local Session number on this switch must equal the Remote Session number on the remote switch and vice versa. It is allowed, and...
Page 137
Configuration 3:R8si R8r Gateway R8si 117 Administration for Network Connectivity 555-233-504— Issue 1 — April 2000 CID: 77730 3 C-LAN Administration Switch 3 Task — Assign Node Names This task assigns node names and IP addresses to each node in the network. This screen is administered on Switch 3. A Node Names screen must be administered on each switch in the network. The node names and IP addresses in any network should be assigned in a logical and consistent manner from the point of view of...
Page 138
Configuration 3:R8si R8r Gateway R8si 3 C-LAN Administration Administration for Network Connectivity CID: 77730 555-233-504 — Issue 1 — April 2000 118 Switch 1 Task — Assign IP Interfaces The IP interface for each C-LAN board on the switch must be defined on the IP Interfaces form. Each DEFINITY switch in an IP network has one IP Interfaces form. Begin Steps > Open IP Interfaces form — enter ch ip-i > Enter values change ip-interfaces Page 1 of 2 IP Interfaces Inter-region IP connectivity...
Page 139
Configuration 3:R8si R8r Gateway R8si 119 Administration for Network Connectivity 555-233-504— Issue 1 — April 2000 CID: 77730 3 C-LAN Administration Subnet Mask Enter the subnet mask associated with the IP address for this IP interface. (The IP address is associated with the node name on the Node Names screen). In this example, leave the default subnet mask, 255.255.255.0, which indicates no subnetting for a Class C IP address. See the discussion of subnetting, Subnetting (page 16), in...
Page 140
Configuration 3:R8si R8r Gateway R8si 3 C-LAN Administration Administration for Network Connectivity CID: 77730 555-233-504 — Issue 1 — April 2000 120 Switch 3 Task — Assign Link via ethernet Data Module to the LAN This task administers an ethernet data module on Switch 3 for the ethernet connection to Switch 1. The data module associates a link number with a port address, extension number, and node name for the C-LAN port used for this connection. Begin Steps > Open Data Module form — enter a da n...