Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 
151
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
Switch 1 Task — Assign IP Interfaces
The IP interface for each C-LAN board on the switch must be defined on the IP 
Interfaces form. Each DEFINITY switch in an IP network has one IP Interfaces form.
Begin
Steps
> Open IP Interfaces form — enter  ch ip-i
> Enter values
change ip-interfaces  Page   1 of   2 
IP Interfaces
Inter-region IP...

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
152
Subnet Mask Enter the subnet mask associated with the IP address for 
this IP interface. (The IP address is associated with the 
node name on the Node Names screen). 
In this example, leave the default subnet mask, 
255.255.255.0, which indicates no subnetting for a Class 
C IP address.
See the discussion of subnetting, Subnetting  (page 16), in...

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 
153
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
Switch 1 Task — Assign Link via ethernet Data Module to Ethernet
This task administers an ethernet data module for the ethernet connection to node 3. 
The data module associates a link number with a port address, extension number, and 
node name for the C-LAN port used for this connection.
Begin
Steps
> Open Data Module form — enter  a da n
>...

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
154
Switch 1 Task — Assign Processor Channels
This task associates data links (hardware) with processor channels (software) on the 
Switch 1.
Begin
Steps
> Open the Processor Channel Assignment form — enter  ch com p.
> Enter values
change communications-interface processor-channels...

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 
155
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
Destination Node Name of the far-end node for this channel. This must be a 
name entered on the Node Names screen. For ppp 
connections, it must match the Destination Node Name 
entered on the ppp Data Module screen.
Destination Port A value of 0 allows any available interface channel on the 
destination node to be used for this connection. The...

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
156
> Submit the screen
End
Session - Local  For each connection, the Local Session number on this 
switch must equal the Remote Session number on the 
remote switch and vice versa. Session - Remote
Mach ID Destination switch ID identified on the dial plan of the 
destination switch. Field Conditions/Comments
3 of 3 

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 
157
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
Switch 2 Task — Enable Bus Bridge Connectivity
This task enables the bus bridge functionality on the C-LAN circuit pack to provide a 
path between the packet bus and the processor.
Note:Bus Bridge Connectivity is used on the csi model only. This task may 
have been complete when the C-LAN circuit pack was installed.
Begin
Steps
> Open the...

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
158
Switch 2 Task — Assign Node Names
This task assigns node names and IP addresses to each node in the network. This 
screen is administered on Switch 2. A Node Names screen must be administered on 
each switch in the network.
The node names and IP addresses in any network should be assigned in a logical and 
consistent manner from the point of...

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 
159
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
Switch 2 Task — Assign Link via ppp Data Module to Switch 1
This task administers a ppp data module on Switch 2 for the ppp connection to Switch 
1. The data module associates a link number with a port address, extension number, 
and node name for the C-LAN port used for this connection.
Begin
Steps
> 
Open Data Module form — enter ad da 3020
>...

Configuration 5A: R8csi  R8r (one C-LAN) 
 R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
160
> Submit the screen
End
COS:
The values for these fields will be specified by the system 
administrator. COR:
TN:
Node Name: The node name for the interface defined by this data module. 
This must be a name 
Establish 
Connection?n means that the switch at the remote end of this connection 
(Switch 1 in this case) will be responsible for the...