Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Upgrades And Additions Manual

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-13 Upgrade the Software and Hardware 
4
Figure 4-1. TN794/TN2400 Network Controller Interface Assembly
For high or critical reliability:
3. Insert the TN792 Duplication Interface circuit packs into the slots labeled 
DUPN INTFC.
4. If the R8si carrier is located in a Multicarrier Cabinet, attach the 14-in. fiber 
optic cable to the faceplates of the installed...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-14 Upgrade the Software and Hardware 
4
Figure 4-2. Fiber optic cable connecting the two TN792 duplication interface circuit 
packs (multicarrier cabinet only)
5. Install apparatus blanks over any vacated slots.
6. Check the software load number on the TN790B Processor label. Insert the 
appropriate flashcard into the TN794/TN2400 assembly based on the 
following...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-15 Upgrade the Software and Hardware 
4
Power Up the System (Standard Reliability)
1. Set the cabinet circuit breaker to ON. 
NOTE:
If the system was rebooted with the software memory flashcard, switch 
flashcards when prompted. This takes about 3 minutes.
2. If applicable, remove the software memory flashcard and inser t the new or 
original translation flashcard...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-16 Upgrade the Software and Hardware 
4
7. Set the cabinet circuit breaker to ON
NOTE:
Look for the “Card in Use” LED below the flashcard on the TN794 to 
go out. This takes about 3 minutes.
8. Remove software memory flashcard and insert the new or original 
translation flashcard into the same carrier as directed in the Save 
Translation step and Remove ISDN...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-17 Upgrade the Software and Hardware 
4
1. Type change daylight-savings-rules and press En te r.
2. Type the appropriate start and stop information in the Change Day, 
Month, Date, Time, and Increment (for example, 1:00 equals one hour) 
fields for each rule. 
NOTE:
You can change any rule except rule 0 (zero). You cannot delete a 
daylight savings rule if it is...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-18 Upgrade the Software and Hardware 
4
2. Type the day in English (Sunday through Saturday) in the Day of the 
Week: field. See Table 4-3
 for English day names. When done, press Ta b 
to move to next field.
3. Type the current month in English (January through December) in the 
Month: field. See Table 4-4
 for English month names. When done, press 
Ta b to move...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-19 Upgrade the Software and Hardware 
4
8. Type standard or daylight savings in the Type field, according to the 
current time in the local time zone. For example, if currently on standard 
time, type standard.
9. Type the rule number in the Daylight Savings Rule field.
10. When all the information is correct, press 
En te r.
11. Type display time and press 
En t...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-20 Upgrade the Software and Hardware 
4
Enable TTI
NOTE:
Do this step only if the TTI is disabled and you want it enabled.
1. Type change system-parameters features and press 
En te r to change the 
TTI field back to its value before the upgrade.
Resolve Alarms
1. Type display alarms and press En te r to examine the alarm log. Resolve 
any alarms that may exist...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-21 Upgrade the Software and Hardware 
4
Save Translations
1. Type save translation and press En t e r to copy upgraded translations in 
memory to the upgraded translation card, which takes about 10 minutes.
Restore Announcements (if necessary)
1. Type restore announcements and press En t e r to copy announcements 
from the upgraded translation flashcard to memory,...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-22 Upgrade the Software and Hardware 
4
Return Replaced Equipment
1. Return the replaced equipment to Lucent Technologies according to the 
requirements outlined in the following books:
BCS/Material Logistics, MSL/Attended Stocking Locations
Methods and Procedures for Basic Material Returns
2. If the original translation card is not being used with the Release 8...