Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Upgrades And Additions Manual

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-3 Read this First 
4
Software Upgrade
Although the translations upgrade automatically to Release 8, several features 
require special attention because of screen changes or potential naming conflicts 
in the update or upgrade procedure.
Between customer confirmation and the actual update or upgrade, check the 
screens to ensure the translations meet the customer’s...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-4 Read this First 
4
Required Hardware
The equipment in Table 4-1 must be on site before the upgrade begins. To place a 
claim for missing equipment, as part of the Streamlined Implementation process, 
call 1-800-772-5409, or the number provided by your Lucent Technologies 
representative.
Table 4-1. Required Hardware
Quantity
Equipment Description Standard...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-5 Task Table 
4
Ta s k  Ta b l e
Table 4-2 lists the high-level tasks to perform the upgrades. Refer to the 
appropriate page for instructions for each step.
The upgrade procedure is similar for both the standard and high or critical 
reliability system with a few exceptions. These exceptions are noted as you go 
through the steps.
Table 4-2. Tasks to upgrade the...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-6 Upgrade the Software and Hardware 
4
Upgrade the Software and Hardware
Check SPE
Ty p e  status system 1 and press En te r to check the health of the system. 
Disable Scheduled Maintenance and Alarm 
Origination to INADS
1. Type change system-parameters maintenance and press En te r to prevent 
scheduled daily maintenance from interfering with the update or...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-7 Upgrade the Software and Hardware 
4
3. Type neither in the Alarm Origination to OSS Numbers field and 
press 
En t e r .
NOTE:
For some software loads, set the Cleared Alarm Notification 
and Restart Notification fields to disable before pressing 
En t e r.
Disable TTI
NOTE:
Do this step only if the Terminal Translation Initialization (TTI) is disabled and you...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-8 Upgrade the Software and Hardware 
4
!WARNING:
Translation corruption detected; call Lucent Technologies distributor 
immediately.
NOTE:
The save translation command cannot function if the translation 
corruption message appears. Refer to ‘‘Translation Corruption 
Detected’’ on page B-5 to clear the problem.
NOTE:
This translation card may or not be used in the...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-9 Upgrade the Software and Hardware 
4
10. Type change communication-interface processor-channels and press 
En t e r.
11. For each processor channel where the Application field is set to ISDN, 
clear all fields and press 
En t e r.
12. Type change communication-interface links and press 
En t e r.
13. For 
each PI extension where the Prot field is set to ISDN:
a....

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-10 Upgrade the Software and Hardware 
4
Verify Software Version
If standard reliability:
1. Type list configuration software-version and press 
En t e r. Under the 
UPDATE FILE column, note whether any patches have been applied.
NOTE:
If you restore the system to the old software, you must download 
these patches onto the system.
Check Translations Date field to...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-11 Upgrade the Software and Hardware 
4
Power Down the Control Cabinet
!CAUTION:
Powering down the control cabinet causes important system data, such as 
BCMS data, records of queued ACD calls, Automatic Wakeup request, and 
Do Not Disturb requests, to be lost.
1. Set the circuit breaker to OFF.
NOTE:
On a Single-Carrier Cabinet, the breaker is on the back. On a...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Upgrading R5si/R6si/R6 SR EPN to R8si/R8 SR EPN 
4-12 Upgrade the Software and Hardware 
4
For high or critical reliability:
6. Remove the TN772 Duplication Interface circuit packs and place them in 
antistatic packing material.
NOTE:
Leave the existing duplication cables connected to the backplane. The fiber 
optic cable connecting the new TN792 Duplication Interface circuit packs 
does not replace these cables....