Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual
Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 221
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-47 1145B Power Supply 5 nAny 7500- or 8500-series terminal with an asynchronous data module nAny 7500-series terminal whether in passive bus, or point to point (1 per BRI port) nAny 8510 terminal in passive bus or with an asynchronous data module (unless the 8510 will not be used to support data or video) nPassageWay adapter interface nAny...
Page 222
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-48 1145B Power Supply 5 Figure 5-22. 1145B/1146B Mounting Arrangement Figure Notes 1. Wall Mounting Plate 2. Battery (1149B Shown) 3. 1146B Power Distrib ution Unit 4. 1145B Power Unit5. Power Cab le 6. Unswitc hed Outlet (120 VAC, 20 Amp or 230 VAC, 15 Amp ) 7. Battery Bac kup Switc h Setting 1145 Power Unit 1149 Battery On Battery Reserve...
Page 223
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-49 1145B Power Supply 5 Mount the 1146B Power Distribution Unit 1. Insert and sec urely tig hten the 2 sup p lied #8-32 x 1/2-inc h should er sc rews into the top holes d esig nated for 1146B Power Distrib ution Unit on the b ottom p late. Mount the unit on these 2 should er sc rews, using the key holes on the b ac k of the unit. 2. Sec ure...
Page 224
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-50 1145B Power Supply 5 Install the Expanded Power Distribution Unit A second power distribution unit can be installed to provide power to additional 8400-series and 8500-series terminals. !CAUTION: Total p ower c annot exc eed 275 Watts. The maximum ISDN terminal mixture is twenty four 7500-series and twenty four 8500-series terminals. The...
Page 225
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-51 1145B Power Supply 5 Figure 5-23. Expanded Power Distribution Unit Figure Notes 1. Wall-Mounting Plate 2. Sec ond 1146B Power Distrib ution Unit 3.“ T” Cab le (H600-347-G7)4. First 1146B Power Distrib ution Unit 5. 1145B Power Unit 1145 Power Unit 1149 Battery On Battery Reserve Charging Battery Output Power On1 2 3 4 5 6 7 8 9 10 11 12 13...
Page 226
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-52 1145B Power Supply 5 Power Up and Test 1. Connec t the AC power c ord to the power sup p ly and route the c ord to an ap p rop riate AC outlet using the c lip s p rovid ed on the unit. NOTE: A maximum of 4 power supplies can be powered from either a d ed ic ated 100V - 120V, 50/60 Hz, 20 Amp feed er or a 200V - 240V, 50/60 Hz, 10 Amp...
Page 227
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-53 1145B Power Supply 5 Wire the 1146B Power Distribution Unit Wire endpoints to the 1146B while power from the 1145B is on. A red LED lights if its associated circuit is connected to shorted wiring or to a shorted terminal. 1. Install c ross-c onnec t jump ers to wire from the unit (the lab el shows p olarity) to p ins 7 and 8 of the ap p...
Page 228
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-54 1145B Power Supply 5 Reset LEDs on Power Distribution Unit A red LED next to any of the 32 power output connectors indicates a short circuit in the building wiring or the terminal equipment. To reset the LED: 1. Disc onnec t the terminal eq uip ment from the wall jac k. 2. If the LED g oes off, the terminal eq uip ment is faulty and must b e...
Page 229
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-55 1151A1 Power Supply 5 nTo reduce risk of electric shock, do not disassemble these products. Return them for repair when needed. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the products are subsequently used. nPower down the power unit (see label on power...
Page 230
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-56 1151A1 Power Supply 5 Important Safety Instructions Please read the following helpful tips. Retain these tips for later use. When using this power supply, the following safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. nRead and understand all instructions. nFollow all warnings and...