Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-77 Add DS1 Tie and OPS 
5
4. After the system reb oot is finished  and  all troub le is c leared , verify that the 
EMERGENCY TRANSFER CONTROL switc h is set to AUTO. This restores 
the system to the normal mod e.
Enter Added Translations
Administer forms listed under “DS1 Tie Trunk Service” in DEFINITY Enterprise 
Communications Server Release 8...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-78 Add Speech Synthesis 
5
Add Speech Synthesis
The Speech Synthesizer circuit pack is required when the Voice Message 
Retrieval, Automatic Wakeup, or Do Not Disturb features are activated. The circuit 
pack does not require administration.
1. Determine the p ort assig nment of the Sp eec h Synthesizer c irc uit p ac k to 
be added.
2. Install the...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-79 Add Pooled Modem 
5
Add Pooled Modem
Modem Pooling supports 2 kinds of conversion resources: integrated and 
combined. 
The integrated type requires a TN758 Pooled Modem circuit pack for each 2 
conversion resources provided.
The combined type requires a port on a TN754B Digital Line circuit pack and a 
port on either an 8-port TN742, TN769; a...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-80 Add External Modem to EPN 
5
11. Typ e 5
 in the Hold Time (min)
 field .
12. Typ e two-way
 in the Direction
 field .
13. Typ e 9600
 in the Speed
 field.
14. Typ e Full
 in the Duplex
 field .
15. Typ e async
 in the Synchronization
 field .
16. Typ e the p ort p air assig nments in the Analog
 and Digital
 fields and  
p ress 
En t e r....

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-81 Add External Modem to PPN 
5
1. Connec t an RS-232 c ab le to the modem. See Fig ure 5-33.
NOTE:
In the following  step s, a PC with Wind ows 95 or Wind ows NT 4.0 may 
b e sub stituted for the d umb  terminal. Use the Hyp erterminal 
(terminal emulation) ap p lic ation. 
2. Connec t the op p osite end  of the RS-232 c ab le to a d umb  terminal....

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-82 Add External Modem to TN1648B 
5
1. Connec t an RS-232 c ab le to the modem. See Fig ure 5-34.
NOTE:
In the following  step s, a PC with Wind ows 95 or Wind ows NT 4.0 may 
b e sub stituted for the d umb  terminal. Use the Hyp erterminal 
(terminal emulation) ap p lic ation. 
2. Connec t the op p osite end  of the RS-232 c ab le to a d umb...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-83 Add External Modem to TN1648B 
5
Figure 5-35. External Modem Pass-Thru Kit Equipment
Figure Notes
1. Pass-thru Tool
2. Mac hine Sc rew
3. Cable Tie4. Panel Ad ap ter Brac ket
5. Cab le Assemb ly
6. Cab le Tie Mount
Table 5-21. Parts List
Quantity Description Comcode
1 External mod em p ass-thru kit
Kit inc lud es: p ass-thru tool, c ab le ties, p...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-84 Add External Modem to TN1648B 
5
Cabinet Preparation
1. Open the front d oor.
NOTE:
Ad ministration may b e req uired  b efore removing  the c irc uit p ac k in 
the following  step .
2. Determine whic h slot will c ontain the new c irc uit p ac k. Remove the c irc uit 
p ac k or the app aratus b lank from this slot. 
3. Install the new c irc uit...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-85 Add External Modem to TN1648B 
5
Install the Pass-thru Kit 
1. Open the rear d oor.
2. Attac h the p anel ad ap ter b rac ket. See Fig ure 5-37
.
3. Insert the c ab le assemb ly. See Fi g u re  5 - 3 8
.
Figure 5-37. Attach the Panel Adapter Bracket 
prda0002 EWS 090498 

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-86 Add External Modem to TN1648B 
5
Figure 5-38. Attach the Cable Assembly to the Bracket
4. Connec t the external mod em c ab le to the c ab le assemb ly.
5. Attac h the RJ45 (telep hone p lug) to the p ass-thru tool using  a tie wrap . 
See Fi g u re  5 - 3 9
. If you are using  only one RJ45, bund le the other one and  
tie wrap  it near the b od...