Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual
Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 301
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-127 Add IP Interface 5 5. Chec k the Cod e c olumn to see if it says DSMAPD or Med Pro. 6. To c orrec t it, g o to the entry just above the TN802B that says DSMAPD. 7. Type MEDPRO, and press En t e r. Changing the one entry automatic ally c hang es the entry ab ove it. If it is in IP Trunk mode, you g et the following error message: MedPro type...
Page 302
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-128 Add IP Interface 5 Test the External Connection to the LAN To test the external IP connections, ping the IP Interface server, and ping a known computer connected to your network. If everything is configured correctly, the Result column on the Ping Results screen reads pass. If it reads abort, verify the IP-address information and check the...
Page 303
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-129 Add IP Interface 5 2. Type ping ip-address nnn.nnn.nnn.nnn board ccCss and p ress En t e r. Th e v a r i a b l e nnn.nnn.nnn.nnn is the IP ad d ress of the c ustomer’s g ateway and ccCss is the c ab inet, c arrier, and slot of the TN802B IP Interfac e. 3. Type ping ip-address nnn.nnn.nnn.nnn board ccCss and p ress En t e r. Th e v...
Page 304
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-130 Add IP Interface 5 Check your Shipment When your DEFINITY Media Processor order arrives at the customer’s site, check the contents. 1. Insp ec t the ship p ing c arton for d amag e b efore op ening it. If the b ox is d amag ed , d o not op en it. Inform the ship p ing c omp any, and ask for instruc tions on filing a c laim. 2. If the b...
Page 305
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-131 Add IP Interface 5 Figure 5-48. TN802B IP Interface External Cable Assembly 3. Read and follow any d irec tions inserted into the p ac kag e b y the fac tory. Connect the Cables 1. Determine into whic h p ort slot you are p utting the TN802B IP Interfac e. NOTE: Make sure that at least 3 ad joining slots are free. 2. From the rear of the c...
Page 306
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-132 Add IP Interface 5 Connect the Modem NOTE: These instruc tions are for c onnec ting the U.S. Rob otic s modem sup p lied to U.S. c ustomers only. If using a d ifferent mod em, follow the manufac turer’s instruc tions on c onnec ting the mod em. 1. Connec t the RS232 p ort of the mod em to the MODEM c onnec tor of the TN802B external c ab...
Page 307
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-133 Add IP Interface 5 Connect the Monitor, Keyboard, and Mouse NOTE: Only make these c onnec tions if ad ministered loc ally. Not nec essary if ad ministered remotely. You must c onnec t these b efore inserting the TN802B IP Interfac e. 1. Attac h a VGA monitor to the VGA c onnec tor of the TN802B IP Interfac e external c ab le assemb ly. 2....
Page 308
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-134 Add IP Interface 5 Figure 5-50. TN802B IP Interface faceplate 1. Insert the TN802B IP Interfac e into the rig ht most of the three slots you reserved for it (see Fig ure 5-51 ). NOTE: To p rop erly seat the c irc uit p ac k, p ush firmly on the front of the fac ep late until the latc h reac hes the bottom rail of the c arrier. Then c lose...
Page 309
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-135 Add IP Interface 5 Figure 5-51. J58890MA-1 L30 IP Interface Assembly Test the Modem 1. Check for dial tone. 2. Contac t Luc ent Tec hnolog ies Customer Sup p ort and ask a rep resentative to d ial into your IP Interfac e server. Administer the IP Interface Administration is done either locally or remotely. If administered locally, proceed...
Page 310
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-136 Add IP Interface 5 Administration 1. Type change circuit-pack and p ress En te r. 2. Chec k the Cod e c olumn to see if it says DSMAPD or Med Pro. 3. To c orrec t it, g o to the entry just above the TN802B that says DSMAPD. 4. Type MEDPRO, and press En t e r. Changing the one entry automatic ally c hang es the entry ab ove it. If it is in...