Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual
Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 341
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Test Telephones and Other Equipment 6-3 Test External Ringing 6 Test External Ringing Make a test c all to the attend ant c onsole to verify ring ing d evic e sound s when the Nig ht lamp on c onsole is lig hted . If ring ing d evic e has not b een installed b y c ustomer, c onnec t sp are telep hone to information outlet reserved for ring ing d evice and make test call. Test Queue...
Page 342
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Test Telephones and Other Equipment 6-4 Test Music-on-Hold 6 Test Music-on-Hold Verify music is p rovid ed to a held p arty during any hold interval. Test Emergency Transfer Put system in emerg enc y transfer mod e and make c all using emerg enc y transfer telep hone. There may b e up to 4 Emerg enc y Transfer switc hes d ep end ing on the system c onfig uration. The switc h is loc ated...
Page 343
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Test Telephones and Other Equipment 6-5 Test Basic Rate Interface 6 Local Test 1. Log in. 2. Type test inads-link and press En te r. 3. Req uest remote ac c ess p ersonnel to verify a troub le tic ket was c reated . 4. Chec k error log to verify no prob lems. 5. Log off the system. Test Basic Rate Interface Chec k for normal voic e telephone func tion (d ial tone, ab ility to make and rec...
Page 344
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Test Telephones and Other Equipment 6-6 Test Terminating Trunk Transmission 6 Test Terminating Trunk Transmission The Terminating Trunk Transmission Test p rovid es for extension numb er ac c ess to 3 tone seq uenc es that c an b e used for trunk transmission testing from the d istant end of the trunks. The 3 test types must have extension numbers assig ned on the system-parameters...
Page 345
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Test Telephones and Other Equipment 6-7 Test Stratum 3 Clock 6 Check for Red LEDs 1. Turn on the Stratum 3 c loc k and wait 40-50 sec ond s to allow the system to c omp lete the on-b oard d iag nostic s b efore c hec king LEDs. 2. If there are any red LEDs, follow the p roc ed ures in Ta b l e 6 - 1 . Verify Timing to the System 1. To administer the Stratum 3 clock, type change...
Page 346
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Test Telephones and Other Equipment 6-8 Perform Complete System Test 6 4. Verify the results of test 649. If test 649 fails with a c od e of 2101, then c hec k the wiring for EXTSYN0 and EXTSYN1 . Refer to DEFINITY Enterp rise Communic ations Server Release 8 Maintenanc e for R8r. 5. If test 649 is suc c essful, then the system is g etting c orrec t timing from the Stratum 3 c loc k....
Page 347
Connecting Fiber Optic Cables A-1 A DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 A Connecting Fiber Optic Cables Sig nals b etween c ab inets are c arried b y fib er op tic c ab les. The elec tronic sig nals at 1 c ab inet must b e c onverted into op tic al sig nals. These op tic al sig nals are c onverted b ac k into elec tronic sig nals at another c ab inet. The fib er op tic c ables from the DEFINITY System route to a Lig htg...
Page 348
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Connecting Fiber Optic Cables A-2 LASER Product A LASER Product The DEFINITY ECS may c ontain a Class 1 LASER devic e if sing le-mod e fib er op tic c ab le is c onnec ted to a remote Exp ansion Port Network (EPN). The LASER d evic e op erates within the following p arameters: nMaximum Power Outp ut: -5 dBm nWaveleng th: 1310 nm nMod e Field Diameter: 8.8 µm CLASS 1 LASER PRODUCT IEC 825...
Page 349
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Connecting Fiber Optic Cables A-3 Fiber Optic Requirements A Fiber Optic Cable Connections The Customer Servic e Doc ument (CSD) p rovides an “ Inter-Carrier Cab le Running List.” Eac h row on the list rep resents a c ab le c onnec tion. Use the running list to d etermine where to c onnec t eac h fib er op tic c ab le. Multimode Fiber Optic Connections Multi-mod e fib er c ab les are g...
Page 350
DEFINITY ECS Release 8.2 Installation and Test for Multi-Carrier Cabinets 555-233-114 Issue 1 April 2000 Connecting Fiber Optic Cables A-4 Fiber Optic Requirements A Fiber Optic Component Comcodes Ta b l e A - 2 p rovid es fib er op tic c omp onents and assoc iated c omc od es. These c omc od es are from the Luc ent Fib er Op tic s Prod uc t Catalog . For BCS c omc od es, c ontac t your Luc ent Tec hnolog ies rep resentative. For multi-mode fiber op tic c ables and c omc od es, refer to Ta b l...