Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Connecting Fiber Optic Cables 
A-15 Optical Cross-Connect Hardware 
A
Rule 1
Cross-c onnec t the fib er op tic  c ab le b etween 2 lig htwave transc eivers. That is, 
run the c ab le from the TX c onnec tor on 1 transc eiver to the RX c onnec tor on the 
other transc eiver, and  in reverse for the other c ab le. See the top  half of Fi g u re  
A-7. Multi-mod e c onnec tions using  an LIU for fiber...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Connecting Fiber Optic Cables 
A-16 Cleaning Fiber Optic Cables 
A
Rule 5
Ensure fib er op tic  c ab les are not p ressed  ag ainst any sheet metal ed g es b y 
subsequently installed cables.
Rule 6
If the fib er link is d up lic ated , route the fib er via a sep arate g eog rap hic al p ath, if 
p ossib le. This way, if the standard  fib er link is c ut or d amag ed , the dup lic ated  
fib er...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Connecting Fiber Optic Cables 
A-17 Making Changes at an LIU or Shelf 
A
Making Changes at an LIU or Shelf
Circ uit c hang es are mad e b y moving  the fib er op tic  p atc h c ord s to other 
couplings.
To Remove a Fiber Optic Patch Cord
1. At the LIU or shelf, loc ate the c orrec t p atc h c ord  and  unplug  it from the 
coupling.
2. Carefully remove the c ab le from the LIU and  from the...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Connecting Fiber Optic Cables 
A-18 Routing Fiber Optic Cables 
A
4. Loc ate the ap p rop riate c onnec tion on the other sid e of the interc onnec t 
field and carefully route the cable through the split rings of the LIU.
5. Carefully unwind the c ab le from the retainer ring s, rememb ering  the 
minimum b end  rad ius.
6. Plug  the c ab le into the app rop riate c onnec tor c oup ling .
7. Lab el...

Option Switch Settings 
B-1 External Modem Option Settings 
B
DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
B
Option Switch Settings
Some of the interfac e units used  b etween the Multi-Carrier Cabinets and  other 
types of eq uip ment req uire sp ec ific  op tion switc h setting s.
This sec tion lists the setting s req uired  for the Comsp here external mod ems, 572 
p rinters, and  TN760 and  TN464 Tie Trunk c irc uit p ac ks.
Refer to the...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Option Switch Settings 
B-2 External Modem Option Settings 
B
Table B-1. Modem Fields 
Modem 
Connection  Description
Mod em Name This field  is 20 c harac ters long  and  p ermits alp hanumeric  c harac ters to 
p rovide a uniq ue q ualifier for a g iven mod em (suc h as INTEL).
RTS/ C TS 
Enab ledInforms the mod em that c ommunic ation with the d ata sourc e UART is 
d riven with RTS/CTS flow c...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Option Switch Settings 
B-3 External Modem Option Settings 
B
Auto-Answer 
Ring  Numb erThis field  c ontrols the numb er of ring s req uired  b efore the mod em 
answers an inc oming  c all. This field  has a b lank d efault value in a field  6 
c harac ters long . Typic ally, the maximum p ermissib le value for this reg ister 
is 255. The values 1-255 d enote the numb er of inc oming  ring  c yc...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Option Switch Settings 
B-4 Printer Option Settings 
B
Printer Option Settings
Printers c an b e used  with a manag ement terminal as journal p rinters for the 
hosp itality feature and  also as an outp ut devic e for Call Detail Rec ord ing  (CDR). 
A 572 printer c an func tion as a CDR d evic e, system p rinter, or journal p rinter. 
The op tions are set with func tion keys rather than DIP switc...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Option Switch Settings 
B-5 Printer Option Settings 
B
Table B-2. 572 Printer Used with Management Terminal 
 Function Function Name Menu  Menu Status
01 FORM LENGTH 09 11
02 LPI 01 6
03 CPI 01 10
04 LQ or NLQ 01 LQ
05 BUZZER 01 ON
06 FONT 02 FONTCART
07 RESOLUTION 01 144
1 1 B U FFER 0 2 N -L I N E
13 PW ON MODE 01 ON-LINE
14 DIRECTION 01 B1-DIR.1
15 BUFF FULL 02 LF +  CR
1 6 P. E. 0 1 AC TI VE
17...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Option Switch Settings 
B-6 Printer Option Settings 
B
93 PROTOCOL 03 XON/XOFF
94 STOP BIT 01 1
95 PARITY 01 NONE
96 PBS (matc hes c onnec ted  
device)01 9600
Table B-3. 572 Printer used as System Printer 
572 Printer Option Settings
Function Function Name Menu Menu Status
01 FORM LENGTH 09 11
02 LPI 01 6
03 CPI 01 10
04 LQ or NLQ 01 LQ
05 BUZZER 01 ON
06 FONT 02 FONTCART
07 RESOLUTION 01 144
11...