Lexmark X9575 User Manual

Understanding the Bluetooth Default Settings menu
1From the control panel, press  or repeatedly until Setup is highlighted.
2Press .
3Press  or repeatedly until Change Bluetooth Default Settings is highlighted.
4Press .
5After making your choices, press  to save your selections as the default settings.
From hereYou can
Bluetooth EnabledTurn the Bluetooth function on or off.
Discovery ModeTurn the discovery mode on or off. Choosing On allows the printer to detect
other compatible Bluetooth-enabled...

Working with photos
Retrieving and managing photos
Inserting a memory card
1Insert a memory card.
Insert the card with the brand name label facing up.
If there is an arrow on the card, make sure it points toward the printer.
If needed, make sure you connect the memory card to the adapter that came with it before inserting it into
the slot.
21
M
S
X
D
S
D
/M
M
C
C
F
/M
D
P
ictB
rid
g
e
SlotMemory card
1High Capacity Secure Digital (with adapter)
Memory Stick
Memory Stick PRO
Memory Stick Duo (with...

2Wait for the light located near the top memory card slot on the printer to come on. The light blinks to indicate
the memory card is being read or is transmitting data.
Warning—Potential Damage: Do not touch cables, any network adapter, the memory card, or the printer in
the area shown while actively printing, reading, or writing from the memory card. A loss of data can occur. Also,
do not remove the memory card while actively printing, reading, or writing from it.
M
S
XD
SD
/M
M
C
C
F/M
D
PictBridge...

If the printer does not read the flash drive, remove and reinsert it.
Warning—Potential Damage: Do not touch cables, any network adapter, the flash drive, or the printer in the
area shown while actively printing, reading, or writing from the flash drive. A loss of data can occur. Also, do not
remove the flash drive while actively printing, reading, or writing from the flash drive.
MS
X
D
SD
/MM
C
C
F/MD
PictB
ridge
Note: The printer recognizes one active media device at a time. If you insert more than...

From hereYou can
View SlideshowView a slideshow of photos.
Select a photo or photos for printing.
Save PhotosChoose to save photos to a computer or flash drive.
Change Default SettingsChoose default settings for photo size, layout, quality, and paper handling.
Print Camera SelectionsPrint Digital Print Order Format (DPOF) selections.
This option appears only when there is a valid DPOF file on your memory
device.
Understanding the PictBridge Default Print Settings menu
The PictBridge Default Print...

Transferring photos from a memory device to the computer using
the control panel
If the printer is connected directly to a computer, or connected to a computer through a wireless network connection,
you can transfer photos from a memory card or flash drive to the computer.
Notes:
You cannot transfer photos from a memory device to a computer through an external network adapter.
The printer may require that you select a computer (and a PIN if required by that computer).
1Insert a memory card or a flash...

Transferring selected photos from a memory card using the
computer
1Insert a memory card into the printer with the brand name label facing up.
The Productivity Studio software launches automatically on your computer.
Note: For a wireless network connection, you must first open the application and then select the printer you
want to use.
2Click Select photos to save.
3Click Deselect All.
4Click to select the photo(s) you want to transfer.
5Click Next.
6If you want to save the photos to the default folder,...

8If you want to save the photos in a folder other than the default folder:
aClick Browse.
bSelect the folder you want.
cClick OK.
9If you want to assign a prefix to all of the photos you just transferred, select the check box and enter a name.
10Click Next.
11Remove the CD or flash drive to view your transferred photos in the Library.
Transferring photos from a memory card to a flash drive
1Insert a memory card that contains the images you want to transfer.
2After the memory card is detected, press ....

Changing the Productivity Studio searched folders preferences
1From the desktop, double-click the Productivity Studio icon.
2From the Tools menu, click Preferences.
3Click Searched Folders.
4If you want to exclude system folders when looking for photos, select Ignore system folders.
5Click OK.
Changing the Productivity Studio library preferences
1From the desktop, double-click the Productivity Studio icon.
2From the Tools menu, click Preferences.
3Click Library.
From here, you can choose how you want to...

6Press  to select a photo for editing and printing.
7Press .
8Press  to select Edit Photo.
From hereYou can
BrightnessAdjust the brightness of a photo.
RotateRotate a photo in 90-degree increments clockwise or counterclockwise.
CropCrop a photo.
Auto EnhanceEnhance a photo automatically.
Remove Red EyeReduce the red-eye effect caused by light reflection.
Colorized EffectSelect whether to print a photo in black and white, sepia, antique brown,
or antique gray. These effects can make photos appear old or...