Lexmark X9575 User Manual

2Move the paper guides to the sides of Tray 2.
1
2
3
Note: If you are loading A4 or legal-size paper, squeeze the lever and pull to extend the tray.
1
2
A4
LegalA4
Legal
3Load the paper.
Loading paper and original documents
81
Downloaded From ManualsPrinter.com Manuals 

4Adjust the paper guides to rest gently against the left, right, and bottom edges of the paper.
2
3
1
5Insert Tray 2.
6Flip up the paper exit tray stop to catch the paper as it exits.
Note: If you loaded A4 or legal-size paper, pull the paper exit tray stop to extend it fully.
Loading paper and original documents
82
Downloaded From ManualsPrinter.com Manuals 

Understanding and using tray linking
If your printer has the optional Tray 2 installed, there is a feature called tray linking that lets the printer select paper
from one tray until it becomes empty, and then automatically begin feeding paper from the other tray. You must
load the same size and same type of media in both trays.
When the trays are linked, the printer has a total paper capacity of 300 sheets of plain paper, since Tray 1 and Tray 2
each hold 150 sheets of plain paper.
When you are using...

11Press  or  until you reach the paper type loaded in Tray 2. The type should be the same type loaded into Tray
1.
If you want, you can select Auto Detect.
12Press  or  repeatedly until Tray Linking is highlighted.
13Press  or  until you reach Auto.
Tray linking is now set only if you press 
; however, you still need to define the default tray for each of the
following submenus, so continue with the following steps.
Note: Defining the tray tells the printer which tray it will feed paper from when it...

Load up toMake sure
50 transparencies in letter or A4 sizeYou load letter- or A4-size transparencies.
You remove any paper backing sheets from the transparencies
before loading.
The paper guides rest against the left, right, and bottom edges of
the transparencies.
25 sheets of heavyweight matte paper
25 sheets of photo/glossy paper
25 sheets of card stock
Note: Tray 2 supports only letter-, A4-, or
legal-size paper. For small paper sizes, use
the small media feeder in Tray 1.The glossy or printable side...

From hereYou can
Type - Tray 2Specify the type of paper loaded in Tray 2.
Appears when Tray 2 is installed.
Tray LinkingSet tray linking off or to automatic (on).
Copy Source1Specify the source, Tray 1 or Tray 2, for the job.
Photo Source1Specify the source, Tray 1 or Tray 2, for the job.
Print Files Source1Specify the source, Tray 1 or Tray 2, for the job.
Fax Source1Specify the source, Tray 1 or Tray 2, for the job.
PictBridge Source1Specify the source, Tray 1 or Tray 2, for the job.
Bluetooth...

3Place the original document facedown on the scanner glass in the upper left corner. The arrows which surround
this corner remind you of the proper placement.
Note: Photos should be loaded as shown.
4Close the top cover to avoid dark edges on the scanned image.
Loading paper and original documents
87
Downloaded From ManualsPrinter.com Manuals 

Loading original documents into the Automatic Document
Feeder
You can load up to 50 sheets of an original document into the Automatic Document Feeder tray for scanning, copying,
and faxing. You can load A4, letter, or legal size paper into the Automatic Document Feeder.
1Load an original document text side up into the Automatic Document Feeder tray.
Note: Do not load postcards, photos, small items, or thin media (such as magazine clippings) into the Automatic
Document Feeder. Place these items on the...

Load up toMake sure
50 sheets of:
Custom paper
Pre-punched paper
Reinforced edge copier paper
Preprinted forms
Letterhead paper
The document is loaded text side up.
The paper guide is against the edge of the paper.
The paper size fits within these dimensions:
Width:
–210.0 mm–215.9 mm
–8.27 in.–8.5 in.
Length:
–279.4 mm–355.6 mm
–11.0 in.–14.0 in.
You allow preprinted media to dry thoroughly before loading
into the Automatic Document Feeder tray.
You do not use media printed with metallic ink particles....

Printing
Printing basic documents
Printing a document
1Load paper.
2With a document open, click File ΠPrint.
3Click Properties, Preferences, Options, or Setup.
4Adjust the settings.
5Click OK.
6Click OK or Print.
Using the Printing Preferences tabs
Printing Preferences is the software that controls the printing function when the printer is connected to a computer.
All of the print settings are on the four main Printing Preferences tabs: Print Setup, Advanced, Watermark, and Image
Enhancement.
From...