Lexmark X9575 User Manual

5If you would like to use the same line for recording messages on your answering machine, connect a second
telephone line (not provided) between the answering machine and the other N slot of the telephone wall jack.
Connecting to a telephone
Connect a telephone to the printer to use the fax line as a normal telephone line. Then set up the printer wherever
your telephone is located to make copies or to send and receive faxes without using a computer.
Note: Setup steps may vary depending on your country or...

3Remove the protective plug from the EXT port  of the printer.
4Connect the other telephone cord to a telephone, and then plug it into the EXT port  of the printer.
Connecting to an answering machine
Connect an answering machine to the printer to receive both incoming voice messages and faxes.
Note: Setup steps may vary depending on your country or region. For more information on connecting the printer
to telecommunications equipment, see “Using an RJ11 adapter” on page 35.
1Make sure you have the...

2Connect one telephone cord into the LINE port  of the printer, and then plug it into an active telephone wall
jack.
3Remove the protective plug from the EXT port  of the printer.
4Connect a second telephone cord from the telephone to the answering machine.
5Connect a third telephone cord from the answering machine to the EXT port  of the printer.
Setting up the printer
33
Downloaded From ManualsPrinter.com Manuals 

Connecting to a computer with a modem
Connect the printer to a computer with a modem to send faxes from the software application.
Note: Setup steps may vary depending on your country or region. For more information on connecting the printer
to telecommunications equipment, see “Using an RJ11 adapter” on page 35.
1Make sure you have the following:
A telephone
A computer with a modem
Two telephone cords
A telephone wall jack
2Connect one telephone cord into the LINE port  of the printer, and then plug it...

4Connect the other telephone cord from the computer modem to the EXT port  of the printer.
Using an RJ11 adapter
Country/region
United Kingdom
Ireland
Finland
Norway
Denmark
Italy
Sweden
Netherlands
France
Portugal
To connect your printer to an answering machine or other telecommunications equipment, use the telephone line
adapter included in the box with the printer.
1Connect one end of the telephone cord into the LINE port  of the printer.
2Connect the adapter to the telephone line that came with the...

3Connect the telephone line of your chosen telecommunications equipment to the left outlet of the adapter.
If your telecommunications equipment uses a US-style (RJ11) telephone line, follow these steps to connect the
equipment:
1Remove the plug from the EXT port on the back of the printer.
Note: Once this plug is removed, any country- or region-specific equipment you connect to the printer by the
adapter, as shown, will not function properly.
2Connect your telecommunications equipment directly to the EXT...

Country/region
Saudi Arabia
United Arab Emirates
Egypt
Bulgaria
Czech Republic
Belgium
Australia
South Africa
Greece
Israel
Hungary
Poland
Romania
Russia
Slovenia
Spain
Turkey
To connect an answering machine or other telecommunications equipment to the printer:
1Remove the plug from the EXT port on the back of the printer.
Note: Once this plug is removed, any country- or region-specific equipment that you connect to the printer by
the adapter, as shown, will not function properly.
2Connect your...

You may use an adapter with your printer.
Country/region
Germany
Austria
Switzerland
There is a plug installed in the EXT port of the printer. This plug is necessary for the proper functioning of the printer.
Note: Do not remove the plug. If you remove it, other telecommunications devices in your home (such as telephones
or answering machines) may not work.
Setting up to fax while behind a PBX
If the printer is being used in a business or office, it may be connected to a Private Branch Exchange (PBX)...

Using a digital phone service
The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services
can be used.
If you are using an ISDN telephone service, connect the printer to an analog telephone port (an R-interface port)
on an ISDN terminal adapter. For more information and to request an R-interface port, contact your ISDN provider.
If you are using DSL, connect to a DSL filter or router that will support analog use. For more information, contact
your...

The following diagrams explain the sections of the control panel:
3 1
2
4
ItemDescription
1Check wireless status:
Off indicates that the printer is not turned on, is in
Power Saver Mode, or no wireless option is installed.
Orange indicates that the printer is ready for wireless
connection, but not connected.
Orange blinking indicates that the printer is
configured but unable to communicate with the
wireless network.
Green indicates that the printer is connected to a
wireless network.
Green blinking...