Lexmark X9575 User Manual

Changing wireless settings after installation (Windows users only)
To change your password, network name, or other wireless setting:
1Click Programs or All Programs ŒLexmark 9500 Series.
2Click Wireless Setup Utility.
Note: You may be prompted to connect the printer to the computer again using the installation cable as part
of the setup process.
3Follow the prompts on the computer screen to reinstall the software, and make the changes you want.
Finding the signal strength
Wireless devices have built-in...

3Follow the instructions on the Welcome screen to set up the printer.
Tips for using network adapters
Make sure the adapter connections are secure.
Make sure the computer is turned on.
Make sure you entered the correct IP address.
Advanced wireless setup
Creating an ad hoc wireless network using Windows
The recommended way to set up your wireless network is to use a wireless access point (wireless router). A network
set up this way is called an infrastructure network. If you have an infrastructure...

For Windows XP users
1Click Start ΠControl Panel ΠNetwork and Internet Connections.
2Click Network Connections.
3Right-click your the icon for your wireless network connection.
4Click Enable, if it appears in the pop-up menu.
Note: If Enable does not appear, your wireless connection is already enabled.
5Right-click the Wireless Network Connection icon.
6Click Properties.
7Click the Wireless Networks tab.
Note: If the Wireless Networks tab does not appear, your computer has third-party software that...

22Click Start.
23Click Programs or All Programs ŒLexmark 9500 Series.
24Click Wireless Configuration Utility.
Note: You may be prompted to connect the printer to the computer again using the installation cable as part
of the setup process.
25Follow the prompts on the computer screen.
26Store a copy of your network name and security code in a safe place for future reference.
Adding a printer to an existing ad hoc wireless network using
Windows
1Do one of the following:
In Windows Vista, click .
In Windows...

Switching from a wired (Ethernet) connection to a wireless connection
1Press  to turn off the printer.
2Remove the Ethernet cable from the printer.
3Press  to turn on the printer.
4Run the wireless setup application. For more information, see “Run the Wireless Configuration Utility” on
page 202.
5Print a test page to test the communication between the computer and the printer. For more information, see
“Printing a test page” on page 217.
Switching between a USB connection and a wireless network...

Switching between a USB connection and a wired (Ethernet)
network connection
Switching from a USB connection to a wired (Ethernet) connection
1Remove the USB cable from the computer, and then from the printer.
2Insert one end of the Ethernet cable into the Ethernet port of the printer.
3Insert the other end of the Ethernet cable into an available Ethernet port on your router.
4Wait 30 to 40 seconds for the internal print server to detect the wired network settings.
5On your computer, do one of the...

Switching from a wired (Ethernet) connection to a USB connection
1Insert one end of the USB cable into the USB port of the printer.
2Insert the other end of the USB cable into a USB port on the computer.
3On your computer, do one of the following:
In Windows Vista:
a
Click  ΠControl Panel.
bUnder Hardware and Sound, click Printer.
In Windows XP:

Click Start ΠPrinters & Faxes.
4Right-click the Lexmark 9500 Series icon.
5Click Properties.
6From the Ports tab, select the USB port for your printer.
7Click...

Sharing a printer in a Windows environment
1Prepare the computers to share the printer.
aMake all computers printing to the printer accessible through Network Neighborhood by enabling File and
Print Sharing. See the Windows documentation for instructions on enabling File and Print Sharing.
bInstall the printer software on all computers that will print to the printer.
2Identify the printer.
aOn the computer that is attached to the printer, do one of the following:
In Windows Vista:
1Click  ΠControl...

Configuring a network printer manually
1From the printer control panel, press  or  repeatedly until Setup is highlighted.
2Press .
3Press  or  repeatedly until Network Setup is highlighted.
4Press .
5Press  or  repeatedly until TCP/IP is highlighted.
6Press .
The TCP/IP menu appears.
7Find Enable DHCP, and then press  to select Yes or No.
8Find the IP Address, IP Netmask and IP Gateway menu items.
9Press  on each to enter the IP Address, IP Netmask, and IP Gateway for the printer.
10Press  to save your...

Loading paper and original documents
Loading various paper types in Tray 1
Loading paper in Tray 1
Make sure:
You use paper designed for inkjet printers.
The paper is not used or damaged.
If you are using specialty paper, you follow the instructions that came with it.
Note: To avoid jams, make sure the paper does not buckle when you adjust the paper guides.
1Pull Tray 1 completely out of the printer.
Loading paper and original documents
70
Downloaded From ManualsPrinter.com Manuals