Lexmark X9575 User Manual

2Move the paper guides to the sides of Tray 1.
1
2
3
Note: If you are loading A4- or legal-size paper, squeeze the lever and pull to extend the tray. It is unnecessary
to extend the tray for paper sizes shorter in length than A4 or legal, such as letter-size paper. When you pull the
extension out, the first stop accommodates A4-size paper. When the extension is fully out, it accommodates
legal-size paper.
1
2
A4
LegalA4
Legal
3Load the paper.
Loading paper and original documents
71
Downloaded From...

4Adjust the paper guides to rest gently against the left, right, and bottom edges of the paper.
2
3
1
5Insert Tray 1.
Note: The tray cannot be completely inserted so it is flush with the printer front if you extended the tray to
accommodate A4- or legal-size paper. Do not try to force the tray in further.
6Flip up the paper exit tray stop to catch the paper as it exits.
Note: If you loaded A4- or legal-size paper, pull the paper exit tray stop to extend it fully.
Loading paper and original documents
72...

Paper capacities for Tray 1
Load up toMake sure
150 sheets of plain paperThe paper is designed for use with inkjet printers.
The paper guides rest against the left, right, and bottom edges of
the paper.
25 sheets of heavyweight matte paper
25 sheets of photo paper
25 sheets of glossy paperThe glossy or printable side of the paper faces down. (If you are not
sure which side is the printable side, see the instructions that came
with the paper.)
The paper guides rest against the left, right, and bottom...

Load up toMake sure
10 envelopesThe envelopes are designed for use with inkjet printers.
The printable side of the envelopes faces down with the flap to the
left as shown.
You load the envelopes in the center of the tray as indicated by the
icon. Load them vertically and all the way to the back of Tray 1.
You print the envelopes in landscape orientation.
The paper guides rest against the left, right, and bottom edges of
the envelopes.
You select the correct envelope size. If the exact envelope size is...

2Move the paper guides to the sides of Tray 1.
1
2
3
3Use the envelope icon and the 10 x 15 cm (4 x 6 in.) photo card outline on the bottom of Tray 1 to help you position
envelopes or photo cards in the tray.
Note: Do not mix paper types in the tray. You can load either envelopes or photo cards, but not both.
4Load envelopes or photo cards.
Note: Load envelopes or photo cards with the print side facing down. (If you are not sure which side is the
printable side, see the instructions that came with the...

5Adjust the paper guides to rest gently against the left, right, and bottom edges of the envelopes or photo cards.
23
11
23
6Insert Tray 1.
7Flip up the paper exit tray stop to catch the envelopes or photo cards as they exit.
Note: Envelopes and photos require more drying time. Remove each envelope or photo as it exits, and allow it to
dry to avoid ink smudging.
Loading paper and original documents
76
Downloaded From ManualsPrinter.com Manuals 

Loading labels in Tray 1
You can load up to 25 sheets of labels at a time.
1Load labels into the paper tray with the printable side facing down and the top of the sheet feeding into the
printer first.
2Make sure:
You load letter- or A4-size label sheets.
The print side of the labels faces down.
The top of the labels feeds into the printer first.
You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off
during printing, resulting in a paper jam.
The...

3The paper guides rest against the left, right, and bottom sides of the cards.
Note: Photo cards require more drying time. Remove each photo as it exits, and allow it to dry to avoid ink smudging.
Loading transparencies in Tray 1
You can load up to 50 transparencies at a time.
1Load transparencies with the rough side facing down.
2If the transparencies have a removable strip, each strip should face down.
3Make sure:
You load letter- or A4-size transparencies.
You remove any paper backing sheets from the...

Loading banner paper in Tray 1
1Remove the paper tray.
2Remove any paper from the tray.
3Push the lever in, and then extend the tray until it is long enough to accommodate legal size paper.
4Replace the paper tray.
5Tear off only the number of banner pages needed for the banner.
6Set the stack of paper on a flat surface in front of the printer.
7Slide the first sheet of the banner over the handle and all the way into the back of the paper tray.
Using the small media feeder
The small media feeder, located...

Make sure the print side of the item faces down. For envelopes, place the flap side of an envelope faceup and on
the left side as shown:
Using the automatic paper type sensor
The printer is equipped with an automatic paper type sensing device. The Paper Type Sensor automatically detects
the type of paper that has been loaded into the printer and adjusts the settings for you. For example, if you want to
print a photo, load photo paper into the printer. The printer detects the type of paper and...